A Guide to Quality Installed Sound Systems. - Jands
A Guide to Quality Installed Sound Systems. - Jands
A Guide to Quality Installed Sound Systems. - Jands
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Wireless <strong>Systems</strong><br />
ClearCom FreeSpeak ® Wireless <strong>Systems</strong><br />
communications<br />
wireless systems<br />
FreeSpeak ®<br />
FreeSpeak ® uniquely blends digital matrix technology with a locally distributed<br />
wireless “network”. FreeSpeak ® operates license-free in the 1.9 GHz frequency<br />
band, free of interference with other wireless products such as PCs, talent<br />
microphones, IFB and in-ear moni<strong>to</strong>rs. To this capability, the system adds broad<br />
connectivity <strong>to</strong> party-line and digital matrix intercom systems. With FreeSpeak ® ,<br />
beltpack-<strong>to</strong>-beltpack, beltpack-<strong>to</strong>-panel and group communication is finally<br />
possible within a wireless system in full duplex.<br />
Features<br />
• License-free 1.9 GHz DECT Operations<br />
• 20 wireless beltpacks in 1RU (v2 and up)<br />
• Point-<strong>to</strong>-point and small group wireless communications<br />
• Up <strong>to</strong> 6 communications routes per beltpack<br />
• Frequency and channel hopping technology<br />
FreeSpeak ® Integra<br />
FreeSpeak ® Integra uses the same unique cellular au<strong>to</strong>roaming technology as<br />
FreeSpeak ® .<br />
This allows each beltpack <strong>to</strong> continuously detect and au<strong>to</strong>matically select<br />
the best connection <strong>to</strong> the matrix via the Active Antennas. Up <strong>to</strong> 40 beltpacks<br />
can be used with the Eclipse matrix systems, FreeSpeak ® Integra uses a Cell<br />
Controller card, called EQue, fitted within the Eclipse matrix, achieving much<br />
larger wireless system than FreeSpeak ® . Integra provides connectivity between<br />
the beltpacks and any number of ports within the matrix system, creating a true<br />
seamless environment. FreeSpeak ® Integra operates using a cellular network of<br />
DECT 1.8-1.9GHz Active Antennae located around the production environment<br />
which are connected directly <strong>to</strong> the Clear-Com Eclipse matrix.<br />
Features<br />
• Cellular Architecture using low-cost Active Antennae<br />
• Up <strong>to</strong> 40 users per Cell (depending on the environment)<br />
• Up <strong>to</strong> 200 pre-set roles can be defined using system configuration software<br />
• Up <strong>to</strong> 300 meters range under good conditions. Range can be extended by<br />
creating more cells (i.e. add additional Active Antennas)<br />
• Cellular Roaming – users can freely roam between cells, no need for<br />
frequency agility or changing channels<br />
• Patented DPA (Dynamic Port Allocation) technology select your position<br />
directly from the beltpack and talk as you roam, the matrix keeps you<br />
connected<br />
• Full duplex 7kHz ‘commenta<strong>to</strong>r’ bandwidth for high-clarity, fatiguefree<br />
communications<br />
• Presenters or performers can also use FreeSpeak ® Integra as an earpiece<br />
system<br />
• Quick & easy programming of audio routes from the beltpack or via standard<br />
software<br />
• Seamlessly integrates with Eclipse Omega and Median<br />
STOP<br />
PRESS:<br />
New Clear-Com Tempest<br />
Wireless System available<br />
by time of print. Check CD<br />
for the new specs!<br />
TECH-TIPS<br />
What other systems is Clear-Com compatible with?<br />
Clear-Com Party-Line products are compatible with <strong>Jands</strong> Ezicom as well as most other Party-line products and accessories on the market<br />
straight out of the box. Other forms (like TW or Two Wire) require interfaces or TW compatible products provided by Clear-Com. Third party<br />
headsets can also be used with the Clear-Com range, of which most are compatible. Some 3 rd party headsets are sold with different<br />
connec<strong>to</strong>rs or just bare ends. These must be wired <strong>to</strong> suit the Clear-Com product line. All Clear-Com branded headsets are supplied preterminated<br />
ready <strong>to</strong> use.<br />
Here are the standard pin outs for Clear-Com Party-Line products:<br />
Party-Line:<br />
Pin 1 --- Ground (shield)<br />
Pin 2 --- Power<br />
Pin 3 --- Audio<br />
Headset:<br />
Pin 1 --- Mic common<br />
Pin 2 --- Mic hot<br />
Pin 3 --- Headphone common<br />
Pin 4 --- Headphone hot<br />
Clear-Com Communications – Wireless <strong>Systems</strong>