A Guide to Quality Installed Sound Systems. - Jands

microphone
accessories
Quick Fix Adaptors & Pre Amps
Shure A85F Line Matching
Transformer
Shure A95U Line Matching
Transformer
Shure A95UF Line
Matching Transformer
Shure A15AS Switchable
Inline Attenuator
Economy low to high-impedance
microphone matching transformer
provides 24 dB of voltage gain and
may be used in reverse.
Reversible transformer matches low
or high-impedance microphones to
high or low-impedance inputs. The
transformer permits use of very long
microphone cables with either low or
high-impedance microphones.
Completely reversible transformer
matches low-impedance
microphones to high-impedance
inputs or high-impedance
microphones to low-impedance
inputs. Permits use of very long
microphone cables with either low
or high-impedance microphones.
Used to prevent low-impedance
microphones and high-output
condenser microphones from
overloading low-impedance inputs
in high sound pressure level
applications. Switchable between
15/20/25 dB.
Shure A15HP High Pass
Filter
• 100Hz HPF at 12 dB per octave.
• Reduces unwanted noise in
microphone signals.
Shure A15LA Line Input
Adapter
Provides a balanced bridging input
with 50 dB attenuation. Use the
A15LA to connect high-level line
or Aux outputs to low-impedance
microphone inputs.
Shure A15BT Bridging
Transformer
Matches, bridges, or isolates
balanced and unbalanced
devices of different impedances
and levels.
Shure A15RF In-Line RF
Interference Attenuator
Provides all types of balanced
audio systems with greatly
improved immunity to Radio
Frequency Interference (RFI).
Shure A15TG Microphone
Level Tone Generator
The Shure A15TG tone generator
is a battery-powered 700Hz
signal source that can be used
to troubleshoot low-impedance,
balanced line microphone inputs.
Shure A120S In-Line
Switch
Can be used to add an on/off,
push-to-talk, cough button, or
transmitter-relay keying function to
a microphone or other device.
Jands ReadyRack.
A great new addition to the Jands 19 inch rack range.
Desiged specifically for A.V installers to reduce time
and save money. The ReadyRack is as the name
implies, READY to go.
It arrives on-site boxed ready to go with all the
necessary accessories required for a quick, neat and
efficient install. The adjustable equipment supports
make it READY for one person to install heavy
equipment easily.
The Jands ReadyRack is available in two sizes 13RU
(JND-RR13S) and 19RU (JND-RR19S) both being
470mm deep.
Shure Microphone Accessories