suspension - CatalogRack.com

CHRYSLER JEEP APPLICATIONS
WRANGLER TJ6 CYLINDER MODELS '97 ON
FRONT
Stock/Light Load (0-90lbs)
Approx. Lift Part No. Qty.
Spring 2.0" ❹ OME932 2
Shock *N66/N66C 2
Heavy Load (90-180lbs)
Approx. Lift Part No. Qty.
Spring 1.50" ❹ OME933 2
Shock N66 2
Remarks:
❶ JWGK01 is mandatory to prevent driveline vibration.
❷ FKWTJ02 Panhard Rod Bracket is mandatory to ensure correct rear axle
tracking.
REAR
Light SOFT Load/Soft TOP Top
Approx. Lift Part No. Qty.
Spring 2.25" OME941 2
Shock N67 2
Medium Load/Hard Top
Approx. Lift Part No. Qty.
Spring 2.0" OME941 2
Shock N67 2
Heavy Constant Load (220lbs to GVM)
Approx. Lift Part No. Qty.
Spring 2.0" OME942 2
Shock N67 2
❸ FK16 spacer kit is mandatory to prevent coil springs from becoming solid on
full compression.
❹ Due to a variance in curb weight, 4 cylinder models may net slightly more lift
than 6 cylinder models.
➎ N66L/N67L Extended Length Shocks are for 3-5" suspension lifts only and are
not intended for use with any Old Man Emu systems. Modified bump stops
are required.
TO COMPLETE SOFT INSTALLATION
TOP
Part No.
T-Case Spacer Kit JWGK01 ❶ 1
Panhard Rod Bracket FKWTJ02 ❷ 1
Bump Stop Spacer Kit FK16 ❸ 1
Steering Damper OMESD40 1
Qty.
IMPORTANT: FK16, FKWTJ02 & JWGK01 are all mandatory for proper installation.
Failure to install any of these kits will void OME waranty.
OPTIONAL SOFT ACCESSORIES
TOP
Part No.
Front 10mm Trim Spacer OMEJGF10
Rear 10mm Trim Spacer OMEWTJPR10
Qty.
ALSO SOFT AVAILABLE TOP
Part No.
Front Extended Length Shocks N66L ➎ 2
Rear Extended Length Shocks N67L ➎ 2
Qty.
* First part number gives firmer ride for: FRONT–Increased axle weight eg: diesel, bullbar, winch. REAR–Regular load carriers and those who prefer a positive feel.
7