10. PULLERS

10. PULLERS 

Arm sets .......................................................................... 7 

Ball bearing extractors ...................................................7 

Ball joint puller ................................................................6 

Ball joint separators .....................................................16 

Battery terminal puller .................................................13 

Bearing fitting tool kit ....................................................7 

Bearing pullers and sets ...................................... 6-9, 15 

Bearing/seal installer set .............................................15 

Bolt/screw extractor set ............................................9,15 

Clamp spring spreader ................................................13 

Coil spring clamp pair ..................................................16 

Disc brake piston reset tool set ..................................14 

Extractors for ball joint ...........................................11,16 

Flange type axle puller .................................................10 

Fork separators .............................................................11 

Hub pullers ....................................................................10 

Hydraulic rams ................................................................3 

Internal extractors ..........................................................6 

Nut splitters ................................................................9,16 

Piston pin driver ............................................................12 

Piston ring compressors .........................................12,16 

Piston ring spreaders ...................................................12 

Puller for cam wheels ...................................................13 

Puller set for v-belt pulleys ...........................................13 

Puller with pressure screw ...........................................10 

Pullers ................................................................2-11,13-16 

Screw extractor set .......................................................15 

Separators .......................................................................8 

Slide hammer puller set ...............................................15 

Spring compressor .......................................................11 

Sprocket holding tool ...................................................13 

Sprocket multi-lock timing device .................................3 

Steering wheel puller ....................................................14 

Stud pullers/inserters ..............................................10,16 

Tie rod end puller ..........................................................16 

Valve lifters ....................................................................12 

Wheel hub puller ...........................................................15 

- Professional service -

PULLERS 

Type 20 

• standard type, 2-arms 

• drop forged steel 

• interchangeable arms for outside 

or inside and centrical and 

excentrical pulling 

• guarantee smooth and concentric pulling 

• long claws ensures good hold on the part to be pulled 

• packing size: 1 

L/B= length of the bolt/base 

D 

B 

W 

L 

Order no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

L/B 

mm 

Max. 

torque 

Nm 

Weight 

kg 

EAN 

KU201 20-1 90 100 135/17 80 1,1 4021176009433 

KU2010 20-10 120 100 135/17 80 1,2 4021176009921 

KU202 20-2 160 150 210/22 150 2,8 4021176009501 

KU2020 20-20 200 150 210/22 150 3,1 4021176010088 

KU203 20-3 250 200 280/27 300 7,0 4021176009686 

KU2030 20-30 350 200 280/27 300 8,0 4021176010163 

EXTRA LONG CLAWS 

FOR PULLERS 

Type 20 

• delivered in pairs (2 pcs) 


Order no. 

Kukko 

no. 

Length 

mm 

Suits 

Max. 

torque Nm 

Weight kg 

KU1190P 1-190-P 200 20-1, 20-10 80 1,00 4021176001666 

KU3300P 3-300-P 300 20-3 – 20-40 300 4,40 4021176003561 

EAN 

PULLER 

Type 20 SP 

KU2010SP 

• 2-arms 

• interchangeable arms for 

outside or inside and centrical 

and excentrical pulling 

• thin claws 2 mm - can be 

used in confined spaces 

• width 120 mm 

• depths of arms: 

100, 200 and 250 mm 

• length of bolt / base 

137/13 mm 

• weight 3,4 kg 

• max. torque 35 Nm 


EAN 4021176461514 

SPARE CLAW 

KU02000025 

PULLER SET 

2 and 3-arms 

Type 20/30 SP 

KUK2030S 

Kukko no. K-2030S 

• includes both two and 

three-arm pullers 

• interchangeable arms for 

outside or inside and 

centrical and excentrical 

pulling 

• thin claws 2 mm - can be 

used in confined spaces 


• includes three arms, depths: 

100, 200 and 250 mm 

• length of bolt / base 

137/13 mm 


• includes storing box 



EAN 4021176776021 

SPARE CLAW 

KU02000025 

B 

D 

L 


Type 20 PLUS 

• with quick-adjusting 

• with knurled knobs for quick 

loosening and adjustment of puller 

arms without need of a wrench 

• universal type, 2 arms 


• interchangeable arms for outside or 

inside and centrical and excentrical 

pulling 


• long claws ensures good hold on the 

part to be pulled 


Order 

no. 

Kukko 

no. 

Width 

mm 

Depth mm 

W 

L/B mm 

L/B= length of bolt / base 

Max. 

torgue Weight 

Nm kg 

EAN 

KU201X 20-1+ 90 100 135/17 80 1,1 4021176644771 

KU2010X 20-10+ 120 100 135/17 80 1,2 4021176644856 

KU202X 20-2+ 160 150 210/22 150 2,8 4021176644931 

KU2020X 20-20+ 200 150 210/22 150 3,1 4021176645013 

KU203X 20-3+ 250 200 280/27 300 7,0 4021176645198 

KU2030X 20-30+ 350 200 280/27 300 8,0 4021176645273 

10/2 

PULLER DISPLAY 

5-pcs 

Type 20 PLUS 

KU20STX 

Kukkono. 20-STX 

• can be mounted to the wall 

• includes 5 pcs of 20 PLUS-serie 

pullers: 20-1+, 20-10+, 20-2+, 

20-20+, 20-3+ 


EAN 4021176668944 

12.12.2011

PULLER SET 2 and 3-arms 

+ Wera Zyklop wrench 

Type 20 PLUS 

KUKS20301SA 

Kukkono. KS-2030-1+S/8000A 

• puller set in plastic case 

• size of the claw 2,6 x 30 mm 

• applications: machine bearings, 

wheel bearings, electric motor 

bearings, fly wheels etc. 


EAN 4021176345807 

• set includes: 

- 1 pc 2-arm puller 90x100 mm 

- 1 pc 3-arm body 90x100 mm 

- 1 pc extra arm for 3-arm body 

- 1 pc Wera Zyklop 1/4” wrench 

- 1 pc 13 mm socket 

PULLER SET 

for tool trolley 

Type 20 PLUS 

KU161PEU1 

Kukkono. 161-PE-U1 

• puller set in a foam insert 

• applications: all tool trolleys, car repair 

shops, repair shops for small engines, 

industry, industry and service 


EAN 4021176961700 


- 1 pc KU202X puller 

- 1 pc KU2010X puller 

- 1 pc 3-arm body 

- 1 pc extra arm for 3-arm body 

- 3 pcs thin-arms for 3-arm body 

- 1 pc KU431 puller 

- 1 pc 8-01 hydraulic screw 


Type 12 

• 3-arms 

• strong construction, drop-forged steel 

• high pulling force 

• with the help of handle the arms open and 

close centrally around the part to be pulled 

which ensures non-slip, firm pulling 

• excellent gripping 

effect for removing 

particularly stubborn 

ball bearings, gears, 

pulleys etc. 


L/B= length of bolt/base 

Order Kukko Width Depth 

no. no. mm mm L/B mm Max. torque 

Nm 

Weight 

kg 

EAN 

KU121 12-1 100 100 135/17 180 1,2 4021176006616 

KU122 12-2 150 125 175/19 190 1,7 4021176006791 

KU123 12-3 200 165 230/24 250 3,4 4021176006876 


Type 30 

• universal model, 3-arms 


• with interchangeable arms for any required 

reach - serve both as outside and inside 

pullers 


• long claws ensures good hold on the part 

to be pulled 



Order no. 

Kukko 

no. 

Width 

mm 

Depth 

mm L/B mm Weight kg 

EAN 

KU301 30-1 90 100 135/17 1,3 4021176013393 

KU3010 30-10 120 100 135/17 1,6 4021176013621 

KU302 30-2 160 150 210/22 3,5 4021176013478 

KU3020 30-20 200 150 210/22 3,9 4021176013706 

KU303 30-3 250 200 280/27 9,0 4021176013546 

AUXILIARY HYDRAULIC RAMS 

• these rams make a first-class auxiliary tool for boosting the working force of 

mechanical pullers applied to particularly stubborn components 

• operation: position the ram, with its side pressure screw (b) fully backed off, 

between the shaft and the screw (a) and secure by tightening the latter. Initiate 

hydraulic action by tightening the side pressure screw (b). If the part fails to come off 

with the first stroke of the arm, continue to work the puller screw (a) or proceed as 

follows: - back off the side pressure screw (b) - retighten the puller screw (a) and the 

side pressure screw (b) 

• after use, back off screw (b) to make the built-in restoring spring return the thrust 

bolt to its initial position 


A 

Order no. 

Kukko 

no. 

Ø 

mm 

Height Shank 

mm 

Pulling 

force tn 

Torque Nm 

Weight 

EAN 

KU91 9-1 37 62 10 10 35 0,85 4021176005053 

B 

• the nomimal capacity is reached at a torque of (b) 35 Nm (9-1) or 50 Nm (9-2) respectively, 

and must not - in order to prevent accidents and damage to the tool - be exceed. 

• TO PREVENT OVERLOAD, USE SIZE 3 OR BIGGER PULLERS! 

10/3 

12.12.2011

PULLERS, self-centering and self-aligning arms 

Type 43 

• in the presence of force from the spindle, the • due to it’s size suitable especially for maintenance 

arms clasp the part to be pulled with of small appliances 

automatically increasing intensity 

• for pulling battery shoes, small ball bearings, gears etc. 

• arms made of drop-forged special steel • packing size: 1 

2-ARMS 

Order 

no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

L 

mm 

Max. torque Nm 

Weight kg 

EAN 

KU431 43-1 60 50 87 25 0,22 4021176015458 

KU432 43-2 70 70 87 25 0,24 4021176015861 

3-ARMS 

Order 

no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

L 

mm 

Max. torque Nm 

Weight kg 

L= length of bolt 

EAN 

KU4311 43-11 60 50 87 25 0,26 4021176015526 

KU4312 43-12 70 70 87 25 0,30 4021176015601 

PULLERS, self-centering and self-aligning arms 

Type 44 

• general information on top of the page 

• sturdy model for removing tightly seated 

gears, bearings, pulleys, wheels etc. 


2-ARMS 

Order 

no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

L/B 

mm 

Max. 

torque Nm 

Weight kg 

EAN 

KU441 44-1 100 100 130/14 50 0,50 4021176016028 

KU442 44-2 120 120 160/17 85 0,80 4021176016103 

KU443 44-3 160 160 210/19 140 1,80 4021176016288 

3-ARMS 

Order 

no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

L/B 

mm 

Max. 

torque Nm 

Weight kg 


EAN 

KU451 45-1 100 100 130/14 50 0,60 4021176016448 

KU452 45-2 120 120 160/17 120 1,10 4021176016516 

KU453 45-3 160 160 210/19 180 2,30 4021176016691 

KU454 45-4 250 200 260/24 200 4,00 4021176016776 

Autogrip PULLERS 

Type 482 

• thanks to integrated self-alignment with 

spring mechanism, the gripping power 

increases in proportion to the pulling 

power 

• when tightening the puller, the arms centers 

and closes around the part to be pulled 

ensuring strong and non-slip pulling grip 

• arms made of drop forged steel 

2-ARMS 

Order 

no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

Max. 

torque Nm 

• the elastic effect in 

combination with a lean design 

enables pulling operations in 

hard-to-access places 


Weight kg 

EAN 

KU4821 482-1 60 40 25 0,20 4021176479779 

KU4822 482-2 85 90 25 0,58 4021176479854 

KU4824 482-4 200 200 40 1,38 4021176480096 

3-ARMS 

Order 

no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

Max. 

torque Nm 

Weight kg 

EAN 

KU4832 483-2 85 90 25 0,36 4021176480331 

KU4833 483-3 150 150 35 0,90 4021176480416 

KU4834 483-4 200 200 40 1,82 4021176480584 

PULLER SET 2-arm, 3-pcs 

KU482DB 

Width Depth Weigh 

60 mm 40 mm 0,20 kg 

85 mm 90 mm 0,58 kg 

150 150 0,68 kg 



EAN 4021176745836 

10/4 

12.12.2011


Type 204 

• 2-arms 

• made of drop forged steel 

• for pulling ball bearings, gears, pinions, 

steering arms etc. 

• the clamp forces the arms tightly up 

against the part to be removed 

Order no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

• when the side clamp is tightened, 

it forces the claws in under the 

part to be pulled, thus prying it 

away before the actual pulling 

process 



L/B mm 

Max. 

torque 

Nm 

Weight 

kg 

KU2041 204-1 80 90 105/19 100 1,30 4021176028243 

KU2042 204-2 100 100 130/22 120 2,00 4021176028328 

KU2043 204-3 150 140 180/24 175 3,00 4021176028403 

EAN 


Type 210 

• 2-arms 


• the claws on the puller have conical blades 

on one side to facilitate loosening of such 

closely seated parts as axle bearings, ball 

bearing races and pinions 

• normal claws on the other side 

• the arms are reversible - inside and 

outside pulling 

• the side clamp forces the claws in behind 

such parts to enable their removal 


Order no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

L/B mm 


Max. 

torque 

Nm 

Weight 

kg 

KU2101 210-1 95 170 210/22 100 2,60 4021176030383 

KU2102 210-2 135 270 325/24 140 4,30 4021176030468 

EAN 

Hydraulic 

PULLER SET 

10-tn 

Type 800 

KU845150 

Kukkono. 845-150 

• 2 and 3-arms 

• the set includes: 

- 3 pcs of arms depth 100 mm, 

width 50 – 100 mm 

- 3 pcs of arms depth 150 mm, 

width 75 – 150 mm 

- 2 and 3-arms body parts 

- hydraulic ram 10 tons 

- extension parts 50 and 100 mm 

- storing box 

• operation: back off the upper spindle so that the piston can return to its starting position. 

Place the pressure pad on the thrust bolt and screw the hydraulic ram into the puller’s head 

such that the ram fits up snugly on the shaft. Actuation of the upper spindle increases the 

pressure and pulls the part off. Attach one or more spindle extension to the thrust bolt if the 

length of the hydraulic ram is insufficient. Finally, mount the pressure pad on the spindle 

extension. 

• after use, loosen the hydr. screw 


EAN 4021176717871 

2/3-arms combination 

PULLER 

Type 202 

KU2031 


• 2/3-arms, with joint arms 

• with reversible double-end arms - 

inner and outer pulling 

• the claws of the arms are narrow from the 

other head and wide on the other head 


• arms: width 180 mm, depth 80 mm 

• length of bolt/base: 135/17 mm 




EAN 4021176027741 


Type 201 

• 2-arms, with joint arms 

• reversible arms - inner and outer pulling 

• the claws of the arms are narrow from the 

other head and wide on the other head 




Order no. 

Kukko 

no. 

Width 

mm 

Depth 

mm 

L/B mm 

Max. 

torque 

Nm 

Weight 

kg 

KU2011 201-1 150 85 135/17 75 0,90 4021176026591 

KU2012 201-2 220 130 210/22 150 2,40 4021176026676 

EAN 

10/5 

12.12.2011

COUNTERSTAYS 

for internal extractors 

Type 22 


• operation: Push the type 21 int.extractor 

into the bore of the bearing. Tighten 

nut B to spread the jaws C and force the 

lips D in behind the rounded race edge. 

Place the type 22 counterstay on the 

bearing housing, and tighten the screw 

E down on the extractor screw A. Now, 

hold the handle G firmly and tighten the 

nut F to extract the bearing smoothly 

and evenly. Keep tightening the extractor 

nut B during the pulling process. 

22-1 

KU221 

Kukkono. 22-1 


• suitable for internal extractors 

no. 21-1 - 21-5 and 21-0-E - 21-4-E 


EAN 4021176012228 

22-2 

KU222 

Kukkono. 22-2 



no. 21-6 - 21-8 and 21-5-E - 21-7-E 


EAN 4021176012303 

22-3 

KU223 

Kukkono. 22-3 



no. 21-9 


EAN 4021176012488 

INTERNAL EXTRACTORS 

Type 21 and 21-E 

• for internal pulling of ball bearings, sleeves, 

bushes etc. even if they fit closely up to the back 

of the housing 

• when the bushing expands the claws tightens 

under the part to be pulled 


Type 21 

Order 

no. 

Kukko 

no. 

Ø 

mm 

Weight 

kg 

Compatible 

counterstay 

EAN 

KU211 21-1 12–16 0,16 Kukkono. 22-1 4021176010811 

KU212 21-2 14–19 0,18 Kukkono. 22-1 4021176010996 

KU213 21-3 18–23 0,20 Kukkono. 22-1 4021176011153 

KU214 21-4 20–30 0,22 Kukkono. 22-1 4021176011238 

KU215 21-5 28–40 0,36 Kukkono. 22-1 4021176011498 

KU216 21-6 36–46 0,68 Kukkono. 22-2 4021176011566 

KU217 21-7 45–58 1,20 Kukkono. 22-2 4021176011641 

KU218 21-8 56–70 1,44 Kukkono. 22-2 4021176011726 

KU219 21-9 70–100 2,56 Kukkono. 22-3 4021176011986 

KU211-KU213 

KU214-KU219 

KU215E 

Type 21-E 

Order 

no. 

Kukko 

no. 

Ø 

mm 

Weight 

kg 

Compatible 

counterstay 

EAN 

KU215E 21-5-E 34–48 0,24 Kukkono. 22-2 4021176924071 

BALL BEARING PULLERS 

Type 69 

Operation: The puller engages the bearing rings. This entails 

destruction of the cage. The spherical segments of the pulling elements 

insert between the inner and outer rings of the bearing. Turning them 

90 degrees tightens their grip and enables uniform extraction of the 

ball bearing. After screwing the legs of the pulling tools into the pulling 

elements, fasten them to the head 

of the puller, and effect pulling by 

tightening the puller’s pressure 

screw against the shaft upon 

which the bearing is mounted. 

BALL BEARING PULLER SET 

Type 69-B 

KU69B 

Kukkono. 69-B 

• for ball bearings ISO 6207 – 6211, 6305 – 6308, 6403 - 6405 

• width 35–120 mm 

• 2 pcs of arms, pulling L 165 mm 

• length of bolt/base 165/13 mm 

• pulling pins: Ø 9-11-12,5 mm 

• metal case 



EAN 4021176781476 

10/6 

13.12.2011

BALL BEARING EXTRACTORS 

Type 70 

• without arms 

• for quick and easy removal of ball bearings mounted on shafts in housings 


Order no. Kukkono. Suitable arms Weight kg EAN 

KU701 70-1 70-711, 70-712, 70-713 0,30 4021176021138 

KU702 70-2 70-721, 70-722 0,60 4021176021213 

Order the arms for extractors from the table below! 

ARM SETS 

Type 70 

• the set includes 4 pcs of arms 

• operation: Select the extractor and arms from the table. Insert the claws between the 

balls in the outer race of the bearing. For any bearing marked with an *(asterix), first 

place a spacer ring carrying the matching bearing number on the inner bearing 

race. Press the upper end of the claws together, so the recesses can engage around 

the collar of the threaded bushing. Then firmly tighten the clamping plate which in turn 

pushes the cap over the claws. Remove the ball bearing by tightening the center screw. 


On picture 

extractor + 

arm set 

Order no. Kukkono. Length 

mm Extractor For bearings EAN 

KU70712 

(6 pcs spacer rings) 

70-712 150 70-1 *6004, *6005, *6006, 6201, *6202, *6203, *6300 4021176021541 

For any bearing marked with an *(asterix), first place a spacer ring carrying the matching bearing number on the inner bearing race. 

BALL BEARING TOOL SET 

Kukkono. 70-A 

KU70A 

• for bearings 6000 - 6013, 6200 - 6212, 6300 - 6311, 6403 - 6408 

• includes extractors no. 70-1, 70-2, 70-3 

• 3 sets of arms no 70-711, 70-712, 70-713 

• 2 sets of arms no 70-721,70-722 

• 2 sets of arms no 70-731,70-732 

• 1 set of spacer rings = 26 pcs 



EAN 4021176022128 

BEARING FITTING TOOL KIT 

Kukkono. T-071-L 

KUT071L 

• for mounting ball and roller bearings etc. 

• impact rings made of shock resistant 

polyacetate - do not damage the bearing 

• includes 

- 33 impact rings: Ø 10-26 - 50-110 mm 

- impact sleeves: Ø 18, 32 and 52 mm 

- non-rebounding hammer 



EAN 4021176822483 

10/7 

13.12.2011

BEARING PULLERS 

Type 112 and 113 

• arms made of spring steel 

• self-centering versions centers and closes the arms around the part 

to be pulled automatically ensuring strong and non-slip grip 


KU1122 

KU11220 

KU1123 

2-ARMS 

Order no. 

Kukkono. 

Kukkono. 

W 

mm D mm Working range SKF 

L/B 

mm 

Max. 

torque 

Nm 

Weight 

kg 

KU1122 112-2 90 70 TMMP 2 X 90 135/17 55 0,80 4021176419218 

KU11220 112-20 100 100 TMMP 2 X 100 160/17 55 0,90 4021176420283 

KU1123*) 112-3 185 165 TMMP 2 X 170 220/17 65 2,00 4021176420368 

*) bent arms 

L/B= length of bolt / base 

EAN 

KU11320 

3-ARMS 

Order no. 

W 

mm D mm Working range SKF 

L/B 

mm 

Max. 

torque 

Nm 

Weight 

kg 

KU11320 113-20 125 100 TMMP 3 X 125 160/17 45 1,10 4021176422423 

EAN 

SEPARATORS 

Type 15 

• mould forged steel 

• sharp jaws 

• press the separator jaws together by tightening the 

nuts on both sides 

• use together with puller Type 18 


Order no. Kukkono. Hole Ø mm Width mm Weight kg EAN 

KU150 15-0 5 - 60 60 0,70 4021176006951 

KU151 15-1 12 - 75 75 1,00 4021176007033 

KU152 15-2 22 - 115 115 2,5 4021176007118 

BEARING PULLER SET 10-pcs 

Type 25 

KU25B 

• includes: 

- 8 pcs of internal extractors (12–70 mm) 

- 2 pcs of counterstays 

• for pulling out bearings, sleeves, bushes, even bearings that fit 

closely up to the back of the housing 

• weight with metal case 9,9 kg 


EAN 4021176013133 

BEARING PULLER SET 3-pcs 

Type 15 

KU15A 

• includes: 

- separator, diameter of hole 12–75 mm 

- pulling tool, width 60–150 mm 

- extension 

• for pulling ball bearings, roller bearings, inner races and 

other tight-fitting parts 

• weight with metal case 4,7 kg 


EAN 4021176007521 

10/8 

13.12.2011

PULLER 

Type 18 

• mould forged steel 

• use with a separator 

• for pulling bearings, gearwheels and gears from confined spaces 


Order no. Kukkono. W mm D mm L/B mm Weight kg EAN 

KU180 18-0 50-110 150 130/14 0,85 4021176075599 

KU181 18-1 60-150 200 175/19 1,70 4021176075674 

KU182 18-2 60-200 250 170/22 3,20 4021176075759 

KU184 18-4 120-380 350 200/27 13,80 4021176006043 

PULLERS ”ECONOMY” 


• with reversible double-end S jaws 


Order 

no. 

Kukkono. 

Arms W D L/B 

mm mm mm 

Max. 

torque 

Nm 

Weight 

kg 

EAN 

KU2080 208-0 2 100 50-75-100 110/8 20 0,35 4021176432248 

KU2090 209-0 3 100 50-75-100 110/8 20 0,45 4021176432323 

BOLT/SCREW EXTRACTOR SET 

25-pcs 

Type 49-U-B 

KU49UB 

• contains: 

- 10 pcs of bit guides 

- bits and torsion studs: 

3,2-4,8-6,4-8,0-8,7 mm 

- nuts 5 pcs 

• for removing broken bolts and screws 

• bit guides for easy tapping of broken-off 

connectors, even deep inside tapped bores 

• for bolts 

M5 – M16 


• weight 620 g 


EAN 4021176799136 

KU2080 

KU2090 

1. Drill a hole 

with the help 

of bit guide 

2. Pound the 

torsion stud into 

the hole and 

press the internal 

nut as deep 

as possible. 

3. Turn the nut 

counterclockwise 

smoothly. 

Spare torsion studs: 

KU49UB-3,2 3,2 mm 

KU49UB-4,8 4,8 mm 

KU49UB-6,4 6,4 mm 

KU49UB-8,0 8,0 mm 

NUT SPLITTERS 

• for splitting jammed or stripped nuts witout damage to the bolt 


Type 54 

• double-edged models exerting twice the normal splitting force 

• for nuts in quality classes 5, 6 and 8 


Type 55 

• for splitting nuts in quality class 6 and below 


Order no. Kukkono. Nut Weight EAN 

KU542 54-2 10 - 27 0,40 4121176170614 

Order no. Kukkono. Nut Weight EAN 

KU551 55-1 10 - 18 0,22 4021176020063 

KU552 55-2 19 - 27 0,44 4021176020148 

10/9 

13.12.2011

STUD PULLERS/ 

INSERTERS 

Type 50 

• the knurled and grooved 

clamping wheel presses the 

stud tightly up against the 

internal serration 

• a particularly strong, 

practive-proven model is 

available for maximum 

stress and strain 


Order 

no. 

Kukkono. 

For screw 

mm 

Driver 

mm 

Weight 

kg 

EAN 

KU501 50-1 5 - 10 17 0,10 4021176019258 

KU502 50-2 8 - 19 27 0,40 4021176019333 

KU503 50-3 18 - 25 36 0,60 4021176019418 

STUD PULLER/ 

INSERTER SET 

Type 53 

KU53 

• in the hole which goes through the 

socket has 3 gripping rolls which 

grips the inserter when turning 

clock or counterclockwise 

• sizes 6, 8, 10, 12 mm 

• hexagon 21 mm driver for wrench 

• 1/2“ driver for ratchet wrench 


• plastic case 


EAN 4021176342233 

STUD PULLERS/INSERTERS 

Type 53 

• hexagon 21 mm driver for wrench 

• 1/2” driver for ratchet wrench 


Order no. Kukkono. Ø Weight kg EAN 

KU538 53-8 8 0,14 4021176342493 

KU5310 53-10 10 0,22 4021176342561 

PULLER with 

pressure screw 

KU230S 

Kukkono. 230-S 

• bolt sizes 4 – 14 mm 

• for bolthole Ø 100 – 150 mm 

• pulling by tightening the pressure screw 


EAN 4021176893377 

UNIVERSAL 

HUB PULLERS 

Type 40 


• a robus puller for passenger cars, vans and trucks with bolthole 

diam. up to 225 mm 

• impact/shock-resistant design 

• the spindle rests in a self-aligning threaded bushing 


Order no. Kukkono. Arms Weight kg EAN 

KU403 40-3 3 4,20 4021176014611 

10/10 

13.12.2011

EXTRACTORS FOR BALL JOINT 

Type 128 


• for quick and simple extracting of ball 

joints 


A = height 

B = width 

C = opening 

Order no. 

Kukkono. 

A 

mm 

B 

mm 

C 

mm 

L/B = length of bolt/base 

L/B 

mm 

Weight 

kg 

EAN 

KU1281 128-1 38 36 18 40/17 0,30 4021176024108 

KU1282 128-2 48 45 23 55/17 0,50 4021176024283 

KU1283 128-3 60 60 29 68/19 1,00 4021176024368 

KU1285 128-5 100 75 46 110/24 1,80 4021176024511 

EXTRACTORS FOR BALL JOINT with adjustable jaw opening 

Type 129 



A = Range 

C = Opening 

P = Size of ball joint 

KU1290 KU1291 KU1293A KU1293 

Order no. Kukkono. A mm C mm P mm Weight kg EAN 

KU1290 129-0 50 20 27 - 30 1,10 4021176410536 

• specially designed for the following passanger cars: Audi, BMW, Fiat, Ford, Mercedes- 

Chrysler, Nissan, Opel, Toyota, VW, Volvo 


KU1291 129-1 50 18-22 19 - 27 0,75 4021176024696 

• universal type for passenger cars and light commercial vehicles 


KU1293A 129-3-A 65 30 35 2,00 4021176803178 

• for passenger cars with aluminium chassis e.g. Audi A6 and A8 and other types of vehicle 

with confined connecting spaces 


KU1293 129-3 70 34 35 - 40 2,50 4021176270949 

KU1294 129-4 85 40 50 2,60 4021176271021 

• for medium-size trucks, busses and construction vehicles 

FORK SEPARATORS 

Type 135 

• handy tool instead of expensive special-purpose equipment 

• for removing seized ball pin joints from tapered seats, removing 

steering-gear arms, shock absorbers and all other kinds 

of separating work 


H= width of fork 

Order no. Kukkono. H mm Weight EAN 

KU1351 135-1 18 0,75 4021176024856 

KU1352 135-2 23 0,85 4021176024931 

SPRING COMPRESSOR 

Universal model 

Type 65 

• safe, universal spring compressor 

• equipped with connection clips which keeps the 

compressors in position while operation 

• the bolts are threaded in their whole length 

• delivered in pairs 


Order 

no. 

Kukkono. 

Length 

mm 

Working 

range 

mm 

Load 

Weight kg 

EAN 

KU651 65-1 300 110-180 2 tn 2,8 40211760207111 

10/11 

13.12.2011

KU1001 

KU1002 

KU1000 

PISTON RING COMPRESSORS 

Type 100 

• for tensioning piston rings when fitting pistons and cylinders 


Order no. Kukkono. Piston Ø Height mm Weight kg EAN 

KU1000 100-0 40 - 75 50 0,13 4021176428203 

KU1001 100-1 57 - 125 80 0,28 4021176022203 

KU1002 100-2 90 - 175 80 0,33 4021176022388 

PISTON PIN DRIVER 

100 mm 

Type 102 

KU1021 

• Ø 100 mm 

• enable easy, gentle removal and 

installation of piston pins without damage 

to the piston 

• fits for all motors of passenger cars and 

motor bicycles 

• with three supplementary pressure pads 



EAN 4021176022791 

PISTON RING SPREADERS 

Type 101 

• for spreading piston rings when mounting them into the piston or 

when removing them from the piston 


Order no. Kukkono. Piston Ø Length mm Weight kg EAN 

KU1011 101-1 50-100 200 0,25 4021176022531 

KU1012 101-2 90-150 240 0,37 4021176022616 

KU1032 

KU1031 

KU1033 

VALVE LIFTERS 

• for assembling valves 


A= opening 

S= straight jaws 

T= curved jaws 

Order no. Kukkono. A mm Jaws Weight kg EAN 

KU1031 103-1 

•small passenger cars 

KU1032 103-2 

•small and medium-size passenger cars 

KU1033 103-3 

•large passenger cars and light 

commercial vehicles 

60 - 230 S 1,20 4021176022876 

40 - 230 S + T 1,35 4021176022951 

115 - 290 S + T 3,25 4021176023378 

10/12 

13.12.2011

PULLER FOR CAM WHEELS 

KU1180 


• AUDI/VW TDI 4, 6 and 8-cylinder diesel engines 

• AUDI/VW V6 and V8 gasoline engines 

• from year model 1998 and on 

• includes 2 pcs of 1-jaw arms 

• includes 2 pcs of 2-jaws arms 



EAN 4021176860904 

SPROCKET MULTI-LOCK 

TIMING DEVICE 

KUT143 

Kukkono. T-143 

• universal type for both double camshaft engines 

and the V-engines equipped with four camshafts 

• for diesel engines in which the cam gear and feed 

pump gear are close with each other 

• for locking the sprocket while changing the timing 

belt 



EAN 4021176893346 

SPROCKET HOLDING TOOL 

KUT144 

Kukkono. T-144 

• universal type, for most passenger vehicles 

• for safe loosening of the fastening nuts of 

cam and feed pump - set the tool into the 

holes of gear, hold back and loosen the 

nut with suitable wrench, this way no 

damage will cause to the engine 

• for rotating the camshaft 

e.g. when adjusting the valves 



EAN 4021176893353 

CLAMP SPRING SPREADER 

KU1190 


• VW and Audi 

• for mounting and 

removing clamp spring on 

and from the spherical 

flanges of exhaust system 



EAN 402176248368 

BATTERY TERMINAL 

PULLER 

Type 41-1 

KU411 

• 2-arms, jointed 

• basic model for pulling off 

battery terminals and other 

small parts 


• depth 65 mm 


• weight 0,20kg 


EAN 4021176015038 

Adjustable 

CYLINDER NUT WRENCH 

IKH7667 

• content: 

- cylinder nut wrench 

- pins 2,5 - 4 mm • 3 - 5 mm • 

6 - 8 mm • 7 - 9 mm 


• packing size: 1/20 

EAN 6418914720244 

10/13 

13.12.2011

SLIDE HAMMER SET M3-M10 

KUKS2201 

Kukkono. KS-22-01 

• slide hammer set in plastic case 

• applications: shape correction of sheet metal, 

removal of bearings, internal extractors etc. 


- adapters M3, M4, M5, M6, M8, M10 

- accessory collars M7, M10, 15-16G, M12 

- slide hammer 1,7 kg 


EAN 4021176924569 

DISC BRAKE 

PISTON RESET 

TOOL SET 

KU12630 


• includes 6 adapters for universal 

accommodation of old and new-model 

European and Japanese vehicles 

• set includes: pressure screw, 

guide bush, pressure plate, 

7 pcs of turn-back adapters, metal case 

• turn-back adapters: VW-Audi, Seat, Skoda, Ford, BMW, Mercedes, Toyota, Nissan and 

Mitsubishi 

• adapters for disc brakes which are equipped with integrated parking brake: 

VW-Audi, Seat, Skoda, Ford, Rover 200, 400, 800, Saab, Jaguar XJ6, Peugeot, Nissan, 

Subaru, Mitsubishi, Mazda, Honda Civic, Citroen, Opel Astra and Vectra 



EAN 4021176891656 

B 

W 

B 

L 

D 

L 

2-ARM PULLERS 

• standard type, 2-arms (EU-type) 

• interchangeable arms for outside or inside 

and centrical and excentrical pulling 


Order no. 

Width 

mm 

Depth 

mm 

L/B 

mm 

Pack. 

size 

EAN 

IKH7545A 100 100 125/17 1/20 6418914730823 

IKH7546A 130 100 125/17 1/20 6418914730830 

IKH7547A 160 150 205/22 1/6 6418914730847 

IKH7548A 200 150 205/22 1/6 6418914730854 

IKH7549A 250 200 270/27 1/3 6418914730861 

D 

2-ARM PULLERS 

• standard type, 2-arms (EU-type) 

• interchangeable arms for outside or inside 

and centrical and excentrical pulling 

W 


Order no. 

Width 

mm 

Depth 

mm 

L/B 

mm 

Pack. 

size 

EAN 

IKH6059 100 100 145/17 1/30 6418914772663 

IKH6060 130 100 145/17 1/24 6418914772670 

IKH6061 165 160 215/23 1/10 6418914772687 

IKH6062 215 160 215/23 1/10 6418914772694 

GEAR 


• with turnable 

arms– possibility 

for outer and inner 

pulling 

2-in-1 

GEAR PULLER SET 75 mm 

IKH7059 

• turnable arms – possibility for 

inner and outer pulling 

• can be used as 2- or 3-armed 


EAN 6418914705975 

2-ARMS: 

Order 

no. 

Size 

mm 

Pack. size 

10/14 

EAN 

IKH7051 75 1/60 6418914705890 

IKH7052 100 1/50 6418914705906 

IKH7053 150 1/30 6418914705913 

IKH7054 200 1/12 6418914705920 

3-ARMS: 

Order 

no. 

Size 

mm 

Pack. size 

EAN 

IKH7055 75 1/60 6418914705937 

IKH7056 100 1/40 6418914705944 

IKH7057 150 1/20 6418914705951 

IKH7058 200 1/8 6418914705968 

13.12.2011

BEARING 

PULLER SET 

IKH7096 

• puller plates 50–75 mm and 75–100 mm, 

chrome-molybdenum-steel 

• frame part made of carbon steel 

• puller leg pairs with extension bar (60 + 90 mm and 80 + 110 mm) 

• tension bolt 160 mm 



EAN 6418914709508 

BEARING 

PULLER SET 

+ SLIDE HAMMER 

IKH7390 

• content: 

Puller Bearing size 

8 mm 8-10 mm 

10 mm 10-12 mm 

12 mm 12-14 mm 

15 mm 15-17 mm 

• handle length 390 mm 

• hammer length 100 mm, hammer weight 940 g 


EAN 6418914547391 

Puller Bearing size 

17 mm 17-20 mm 

20 mm 20-24 mm 

25 mm 25-29 mm 

30 mm 30-32mm 

2/3-arm 

PULLER SET 

250 mm 

IKH7668 

• content: 

- 1 pc 2-arm body part 

- 1 pc 3-arm body part 

- 3 pcs pulling arms 

- 1 pc spindle 


EAN 6418914720251 

BEARING/ 

SEAL 

INSTALLER 

SET 15-pcs 

IKH7377 

• 12,6/17,4 mm - 85,6/90,5 mm 

bearings and seals 


EAN 6418914547261 

SLIDE HAMMER 

PULLER SET 

X009042 

• for loosening bearings, belt pulleys, 

chain pulleys and different kind of hubs 


EAN 6418914149991 

SCREW 

EXTRACTOR 

SET 

IKH7218 

• content: 

- HSS-drills 5 pcs: 3,2 • 4,8 • 6,4 • 8 • 8,7 mm 

- guide bushings 10 pcs: B1 • B2 • B3 • B4 • B5 • B6 • B7 • B8 

B9 • B10 

- extractor pins 5 pcs: C1 • C2 • C3 • C4 • C5 

- extractor nuts 5 pcs: D1 • D2 • D3 • D4 • D5 



EAN 641891464912 

10/15 

13.12.2011

STUD 

REMOVER 

IKH7007 

• driver 1/2” 

• for Ø 6,35–20 mm bolts 

• eccentric-operation 

• packing size: 1/6/24 

EAN 6418914695832 

STUD PULLER 

SOCKET SET 

IKH7107 

• chrome-vanadium steel 

• socket sizes: 

1/4” (6 mm) 

5/16” (8 mm) 

3/8” (10 mm) 

7/16” (12 mm) 

• max. socket torque: 

- 1/4” (6 mm ) = 20 Nm 

- 5/16” (8 mm) = 20 Nm 

- 3/8” (10 mm) = 33 Nm 

- 7/16” (12 mm) = 33 Nm 


EAN 6418914709614 

TIE ROD 

END PULLER 

XAT1151 

• opening 16–44 mm 


• height 70 mm 


EAN 6418914609792 

BALL JOINT SEPARATORS 

Order no. Size 

Packing 

size 

EAN 

IKH7085 300 mm 1/6/36 6418914706224 

IKH7086 400 mm 1/6/24 6418914706231 

BALL JOINT 

PULLER 

IKH7060 

• opening 50 mm, capacity 19 mm 


EAN 6418914705982 

PISTON RING 

COMPRESSORS 

• material spring steel 

• for compressing the piston rings 

into grooves for mounting 

the piston to cylinder 

• includes hex key 

Order no. Piston size Ø Height 

Packing 

size 

EAN 

IKH7023 45 - 90 mm 50 mm 1/20/120 6418914705319 

IKH7024 90 - 175 mm 80 mm 1/20/60 6418914705326 

NUT 

SPLITTERS 

Order 

no. 

Nut 

size 

mm 

Pack. 

size 

EAN 

X005683 5-20 1/10/60 6418914610019 

X005684 14-27 1/12/48 6418914610026 

COIL SPRING 

CLAMP PAIR 

IKH7014 

• with two jaws 

• length 300 mm, width of jaws 

90 mm 


EAN 6418914695986 

COIL SPRING CLAMP PAIR 

280 mm 

XTB1142 

• max. clamping distance 280 mm 


EAN 6418914621053 

10/16 

COIL SPRING 

COMPRESSOR PAIR 

Heavy Duty 

IKH7292 

• single jaws 

• length 280 mm, thickness 25 mm 

• width of jaws 30 mm 


EAN 6418914519503

TIMING GEAR 

LOCKING TOOL SET 

IKH7688 

• suitable for toothed pulleys spaced between approximately 0 - 60 

mm 

• can be used for twin cam, single cam and diesel engines 

• locks the timing gears in place while the timing belt is changed 

• adjustable model 


EAN 6418914742345 

STEERING KNUCKLE 

SPREADER TOOL SET 

IKH7687 

• spreads the steering knuckle without damaging it 

• appliance is adjustable and therefore, can be used with different 

kinds of steering knuckles 

• suitable for use with most of the different car brands e.g. Audi, 

BMW, Citroën, Volkswagen, Ford, Skoda, Seat, Renault, Peugeot 

and many Japanese vehicles 


EAN 6418914742338 

COIL SPRING COMPRESSOR 

for internal compressing 

IKH7694 

• for internal compressing 

• length 300 mm 

• width of jaws 90 mm 


EAN 6418914742598 

NOTE! 

This coil spring compressor is designed for springs up to 12,7-16 cm outside diameter and 

wire diameter of 19 mm. Never, under any circumstances, use the tool to compress larger springs. 

Instructions: 

1. Remove the shock absorber from the vehicle. 

2. Clean all excessive dirt and grime from the spring. 

3. In order to maximize the tool’s life, lubricate the threads of the center bolt. 

4. Position the spring compressor through the shock absorber opening into 

the center of the spring. 

5. Jaws should be fitted over the coils as close to the ends of the spring 

as possible. Note that both ends of the compressor have a long and a 

short jaw. Hook the jaws to the spring using the long and short jaw on 

opposite sides of the spring. 

6. Turn the center bolt clockwise to hand tighten the compressor while aligning 

the jaws. 

7. Using a ratchet fitted with a suitable extension and a 24 mm socket, continue 

tightening of the center bolt in order to compress the spring. 

8. NOTE! Compress the spring only enough to be able to remove or install the 

spring. NEVER OVER COMPRESS A SPRING. 

NOTE! There are some Ford and GM vehicles that are equipped with curved coil 

springs. In this instance, position the tool with the short and long jaws on the same 

side of the spring to maintain the curved shape of the spring. 

10/17 

17.02.2011

10/18

10. PULLERS

Create successful ePaper yourself

Delete template?

Save as template?