LCD TV User Manual - ELV

Important Information
WARNING
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
This symbol is intended to alert the user to the
presence of insinuated “dangerous voltage”
within the TV’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature accompanying
the TV.
To reduce the risk of fire or electric shock, do not expose this TV to
rain or moisture, the TV shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be placed on
the TV.
CAUTION
To prevent electric shock, do not use this polarized AC plug with an
extension cord, receptacle or other outlet unless the blades can be
fully inserted to prevent blade exposure.
Use the Wall-Mount bracket or TV stand which was recommended by
AOC, and please consult your dealer for detailed information.
Use with other Wall-Mount Bracket or TV stand may cause instability
and possibly result in injury.
These servicing instructions are for use by qualified service
personnel only. To reduce the risks of electric shock do not perform
any servicing other than that contained in the operating instructions
unless you are qualified to do so.
Disposal of Waste Equipment by Users in Private
Household in the European Union
This symbol on the product or on its packaging indicates that this
product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment
by handing it over to a designated collection point for the recycling
of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment. For more
information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
CE marking
The shipped version of this device complies with the requirements
of EEC directives 2004/108/EC “Electromagnetic compatibility” and
2006/95/EC “Low voltage directive”.
3
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance
with Directive 2002/95/EC of the European Parliament and the
Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS Directive) and is deemed
to comply with the maximum concentration values issued by the
European Technical Adaptation Committee (TAC) as shown below:
Substance
Proposed Maximum
Concentration
Actual
Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent
Chromium (Cr6+)
0.1% < 0.1%
Polybrominated
biphenyls(PBB)
Polybrominated
0.1% < 0.1%
biphenyl ethers
(PBDE)
0.1% < 0.1%
Certain components of products as stated above are exempted under
the Annex of the RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per
lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components,
fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic
devices).
3. Lead in high temperature type solders (i.e. lead-based alloys
containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead
by weight, aluminium containing up to 0.4% lead by weight and as a
cooper alloy containing up to 4% lead by weight.
NOTIFICATION
Radio Frequency Interference Statement
Warning:
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
��Reorient or relocate the receiving antenna.
��Increase the separation between the equipment and receiver.
��Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
��Consult the dealer or an experienced radio/ TV technician for
help.
For details concerning safety precautions, see “Important Safety
Instructions” and “Important Usage Instructions” below.
Important Safety Information
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8 ) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9 ) Do not defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and third
grounding prong. The wide blade or third prong is provided for
your safety. When the provided plug does not fit into your outlet,