PVC or PVC-PU Hose Hose Length - Rotec
PVC or PVC-PU Hose Hose Length - Rotec
PVC or PVC-PU Hose Hose Length - Rotec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Steam<br />
VAPORE 164<br />
<strong>Hose</strong> Construction<br />
Tube: Black, smooth,<br />
EPM rubber compound.<br />
Heat and saturated steam resistant<br />
Reinf<strong>or</strong>cement: High resistant synthetic textile<br />
fabrics<br />
Cover: Black, smooth, EPDM rubber<br />
compound. Heat, abrasion, ozone<br />
and weather resistant. The cover is<br />
pinpricked to prevent blistering and<br />
bubbling.<br />
Applications<br />
Designed f<strong>or</strong> saturated steam (max 6 bar at 164 °C<br />
= 85 psi at 327 °F) in general industrial applications.<br />
Temperature Range<br />
-40 °C (-40 °F) to 164 °C (+327 °F)<br />
F11<br />
Hot Water and Steam <strong>Hose</strong> b<br />
Tolerances<br />
On inside diameter:<br />
≤ I.D. 35 mm: ± 0,79 mm<br />
> I.D. 38 mm: ± 1,59 mm<br />
On outside diameter: ± 1,59 mm<br />
<strong>Length</strong> tolerance: ± 1%<br />
Recommendations<br />
Use only couplings with safety clamps. Follow the coupling<br />
manufacturer’s instructions f<strong>or</strong> coupling procedures.<br />
Check coupling tightness bef<strong>or</strong>e every utilisation.<br />
Drain after use. When not in use, st<strong>or</strong>e the hose on a flat<br />
surface (shelves) and never hang from a hook.<br />
Note<br />
Available on request, VAPORE 164 SM<br />
with metallic spiral f<strong>or</strong> suction and delivery<br />
WARNING<br />
Steam hoses gradually decrease in their perf<strong>or</strong>mances during service life. Consequently, they need to be<br />
regularly inspected by trained personnel wearing adequate protective cloths overall, including eye protection.<br />
WARNINGS OF DANGER<br />
Cuts and gauges in the hose cover showing the textile reinf<strong>or</strong>cement. Steam leaks. Permanent def<strong>or</strong>mation of<br />
hose. Reduction of steam flow. WHEN ONE OF THESE ABNORMALITIES OCCURS, THE HOSE SHOULD BE<br />
REMOVED FROM SERVICE AND INSPECTED. If a failure occurs close to the couplings, the damaged hose<br />
can be cut recoupled and used as bef<strong>or</strong>e.<br />
W<strong>or</strong>king Burst<br />
Part Number /<br />
Pressure Pressure min. Bend<br />
Standard <strong>Length</strong> I.D. O.D. Weight Radius<br />
Part Number m<br />
mm mm MPa psi bar MPa psi bar kg/m mm<br />
IH36800101/40 10 21 0,60 90,0 6,0 6,0 900,0 60,0 0,34 100<br />
IH36800102/40 12 23 0,60 90,0 6,0 6,0 900,0 60,0 0,37 120<br />
IH36800103/40 15 26 0,60 90,0 6,0 6,0 900,0 60,0 0,39 150<br />
IH36800104/40 19 31 0,60 90,0 6,0 6,0 900,0 60,0 0,58 190<br />
IH36800106/40 25 38 0,60 90,0 6,0 6,0 900,0 60,0 0,80 250<br />
IH36800107/40 30 45 0,60 90,0 6,0 6,0 900,0 60,0 1,08 300<br />
IH36802091/40 32 46 0,60 90,0 6,0 6,0 900,0 60,0 1,05 320<br />
IH36800108/40 35 50 0,60 90,0 6,0 6,0 900,0 60,0 1,22 350<br />
IH36800109/40 40 56 0,60 90,0 6,0 6,0 900,0 60,0 1,49 400<br />
IH36800111/40 50 67 0,60 90,0 6,0 6,0 900,0 60,0 1,93 500<br />
RUBBER HOSE VAPORE - STEAM - DAMPF MADE IN ITALY Parker ITR (embossed)<br />
Catalogue 4401/UK<br />
E F