Boring tools with ISO elements - MAPAL Dr. Kress KG

Tools with ISO elements | Milling | Shoulder milling cutters
Shoulder milling cutter ICM
Shoulder milling cutter 90°
Tangential
Radial
ICM90-C2/C4 ICM90-C2/C4 Finishing ICM90-S4 ICM90-B2-
Shank
Shoulder milling
cutters
ICM90-B2
Properties
- Internal coolant supply
- Enlarged face connection
- Fixed insert seats
- Wider pitch
- Internal coolant supply
- Enlarged face connection
- Adjustable finishing
indexable insert
- Close pitch
- Internal coolant supply
- Fixed insert seats
- Positive installation position
of the indexable insert for
short projection length
- Internal coolant supply
- Fixed insert seats
Application notes
- For roughing and
semi-finish machining
- 90° shoulder surfaces possible
- For roughing and
semi-finish machining
- 90° shoulder surfaces possible
Adjustable finishing indexable
insert
- For roughing and
semi-finish machining
- 90° shoulder surfaces possible
Preferred for castings and steel.
- For roughing and
semi-finish machining
- 90° shoulder surfaces possible
- Ramping milling is possible to
a limited extent (up ø 63)
- Plunging possible
Preferred for castings and steel.
Initial value for adjustable finishing
indexable inserts 0.02 mm –
0.04 mm.
Two-cutting edge indexable
insert
Four-cutting edge indexable
insert
CT_D09T3
CT_Q0905
Preferred for aluminium also
PCD-tipped.
Preferred for castings and steel.
For castings also PcBN-tipped.
43