Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Technical specifications:<br />
Turntable GYRMATIC <strong>350</strong> GYRMATIC <strong>500</strong><br />
Catalogue number 9130-2601 9130-2602 9130-2145 9130-2151<br />
Weld axis<br />
Rotation speed 0.9 to 18.5 tr/min 0.29 to 7.4 tr/min. 0.25 to 4.5 tr/min 0.5 to 10 tr/min<br />
Number of earth clips<br />
One 250A clip - capacity can be increased to <strong>500</strong> A as option<br />
Back gas option option option option<br />
Intermittent welding option option option option<br />
Mechanical specifications<br />
Machined turntable diameter Ø <strong>350</strong> mm Ø <strong>350</strong> mm Ø 490 mm Ø 490 mm<br />
Max. rotation torque 1 m/daN 2 m/daN 5 m/daN 10 m/daN<br />
Max. workpiece diameter with tailstock Ø 300 mm Ø 300 mm Ø <strong>500</strong> mm Ø <strong>500</strong> mm<br />
Max. workpiece length with tailstock 300 mm 300 mm 800 mm 800 mm<br />
Possible tilt<br />
Manual from 0° to 90° with 7 set positions at 15° intervals<br />
Dimensions / Power supply<br />
Dimensions (L x H x D) 430 x 508 x 408 mm 430 x 508 x 408 mm 600 x 1150 x 750 mm 600 x 1150 x 750 mm<br />
Power supply 230 V / 50-60 Hz 230 V / 50-60 Hz 230 V / 50-60 Hz 230 V / 50-60 Hz<br />
Unloaded weight without welding equipment 38 kg 38 kg 140 kg 140 kg<br />
Catalogue numbers:<br />
Turntables GYRMATIC <strong>350</strong> GYRMATIC <strong>500</strong><br />
Rotation speed: 0.9 to 18.5 tr/min 9130-2601 -<br />
Rotation speed: 0.29 to 7.4 tr/min 9130-2602 -<br />
Rotation speed: 0.25 to 4.5 tr/min - 9130-2145<br />
Rotation speed: 0.5 to 10 tr/min - 9130-2151<br />
Primary circuit isolating box for welding application / CE-compliant cut-off 9130-4130<br />
Power supply unit for primary 400 V and stand-alone operation 9130-2290<br />
Support table / horizontal turntable height of 930 mm<br />
Support table 9130-2611 -<br />
Torch support column<br />
Torch support column (fastens on support table) 9130-2610 9130-2158<br />
Add-ons depending on use: horizontal slide, 50 mm travel 9120-5175 -<br />
PROMIG torch support collar 9130-2143<br />
automatic torch support collar 9130-2147<br />
Pneumatic torch retraction facility (100 mm)<br />
Pneumatic slide, 100 mm travel 9130-1310 -<br />
Pneumatic slide, 200 mm travel - 9130-1320<br />
Pneumatic power module 9130-2725<br />
Addition panel for pneumatic torch retraction 9130-2730<br />
Intermittent welding<br />
Cam for intermittent welding 9130-2606 9130-2157<br />
Chuck adapter<br />
Adapter for dia. 125 mm chuck 9130-2645<br />
3-jaw chuck, diameter 125 9120-0031<br />
Add-ons for 2-torch welding<br />
GYRMATIC <strong>500</strong> PROMIG torch support - 9130-2149<br />
Additional 250 A earth clip - 9130-2148<br />
Remote control<br />
Plating for remote control units 9130-2609 Available 1 st quarter 2002<br />
Accessories for manual turntable rotation<br />
Control footpedal 9120-9921<br />
Use with manual or pneumatic tailstock<br />
Tailstock support beam - 9130-2156<br />
Manual tailstock, travel 80 mm - 9130-2152<br />
Pneumatic tailstock, travel 100 mm including pneumatic supply fittings Available 1 st quarter 2002 9130-2153<br />
Large tailstock point, diameter 50 mm - 9130-2146<br />
Other add-ons<br />
Workpiece support plate, diameter <strong>500</strong> mm - 9130-2144<br />
GYRMATIC speed display option 9130-2607<br />
Rotating gas joint for back gas protection 9130-2640 Available 1 st quarter 2002<br />
Additional 250 A rotating earth clip (total <strong>500</strong> A) 9130-2148<br />
7
Change language