Indexable Endmills - OSG

TUNGALOY
Indexable Endmills
The most effective tooling solution with the option of
hundreds of tools!
Tool changeover times can be measurably reduced!
Features
Reduces tool changeover times
drastically!!
Machine downtime is decreased considerably.
Enables users to only change cutting head, simplifying
set-ups.
Increases productivity by 90%
Exchange Time / Piece
Solid endmil
less than 1 minute
10 minutes
The weight of the tool to be
disposed is reduced
Reduces tool disposal
For example: ø12 mm / square endmill
: OAL 20 mm → weight 20 g
conventional solid endmill: OAL 80 mm → weight 140 g
Highly accurate repeatability
Accuracy can be maintained
by touching the taper and face.
Repeatability is guaranteed
and is not a concern for machine
operators.
Face
Taper
Head exchange accuracy
Height± 0.02 mm
Run out
≤ 0.02 mm
No regrinding cost
No laborious endmill regrinding required.
Easily replaceable heads eliminate the use of worn
cutting edges.
All tools can be used to breakage point or maximum
wear point as no regrinding is necessary.
Precision thread
Wide range of cutting heads
23 kinds of cutting heads are available.
The head exchange is easy and highly
accurate with the precision thread.
Flexible combinations
TungMeister can be
applied to all kinds
of endmill machining
applications.
Three kinds of shank material
Users can choose the most suitable
combination according to the
machining parameters, length and
rigidity required.
Power
Up
Straight shank & neck
Straight shank & neck (carbide)
Straight shank & taper neck
Straight (for grooving)
2