Indexable Endmills - OSG

TUNGALOY
Indexable Endmills
VSC type
Straight shank for VST type grooving heads
S
ød L1 L2 S
VSC100L100S06-C ★ 10.0 100 80 S06
VSC120L100S08-C ★ 12.0 100 78 S08
Cat. No.
Stock
Dimensions (mm)
ød ød1 L S
VSTD08L070S05-S ● 8 8 70 S05
VSTD10L080S06-S ● 10 10 80 S06
VSTD12L090S08-S ● 12 12 90 S08
VSTD16L100S10-S ● 16 16 100 S10
S
ød1
M
ød2
ød
L2
L1
Note:
Cat. No.
Stock
● In VSC-C type carbide shank, the wrench for VST grooving head is
included.
● For VSC-C type shank, just VST grooving head is recommended. If
other heads are used on the VSC-C shank, the depth of cut must be
Dimensions (mm)
S = Connection screw size
Shank
material
Carbide
smaller than the max. ap in each head. The VSC-C type shank does
not have external clearance, so the shank may interfere with the work
piece.
VSTD type
Straight shank for VTB type grooving heads
S
ød1
ød
L
S = Connection screw size
Shank
material
Steel
Note:
● For VSTD type shank, just VTB grooving head is recommended. If
other heads are used on the VSTD shank, the depth of cut must be
smaller than the max. ap in each head. The VSTD type shank does not
have external clearance, so the shank may interfere with the work
piece.
VAD-M type
Adapters of TungFlex
L
K
S = Connection screw size
Cat. No.
Stock
Dimensions (mm)
ød1 ød2 L S M K
Shank
material
VAD130L016S08-S-M8 ● 11.7 13 16 S08 M8 11
VAD130L025S08-S-M8 ● 11.7 13 25 S08 M8 11
VAD180L020S08-S-M10 ● 11.7 18 20 S08 M10 13
VAD180L025S08-S-M10 ● 11.7 18 25 S08 M10 11
Steel
VAD210L020S08-S-M12 ● 11.7 21 20 S08 M12 12.75
VAD210L025S08-S-M12 ● 11.7 21 25 S08 M12 12.75
● For TungHoldavailable from May 2010
Stockeditems
★Available from 2010
20