DOWNLOAD Brochure / English - ABL Sursum

eMOBILITY
CHARGING STATIONS For ELECTRIC VEHICLES

YOUR MOBILITY.
OUR TECHNOLOGY.

eMH1
COMPACT SIZE
BIG PERFORMANCE

eMH1 Electric Mobility home 1
Charging Stations
Our eMH1 is the smallest charging station available worldwide, which makes it the perfect solution
for your garage. Attractive and compact space-saving design. The housing is made from
impact-resistant and weatherproof plastic, making the eMH1 suitable for outdoor and carport installations
as well. The unit is preconfigured and ready for use, it simply needs to be connected by
your electrician. The available charge current is individually adjustable, depending on the current
permitted by your domestic supply. Your vehicle is charged gently and efficiently, maximizing the
life of your battery.
220 220 116 116
· Preconfigured and ready to install
· LEDs indicate charging status
· Lockable cover (access to switching devices)
· Integrated circuit protection devices
· can be networked with other charging stations
via RS485 interface
272 272
Specifications EVSE501 EVSE502 ABL ABL Wallbox Wallbox EVSE503
EPH EPH II II
22.02.2012, Ros. Ros.
Compliance According to IEC 61851-1/22
Power supply (1) single-phase 230 V / 16 A, 50 Hz 3-phase 400 V / 16 A, 50 Hz single-phase 230 V / 16 A, 50 Hz
Supply voltage 230 V 230 V / 400 V 230 V
Output current 16 A 16 A 16 A
Max. charging capacity 3.6 KW 11 KW 3.6 KW
Recharge socket
IEC 62196-2 compliant
- Type 2 -
Recharge Connector
complies with IEC 62196-2
- - Type 2
Recharge Connector complies with SAE1772 Type 1 - -
Charging cable
Standard cable,
Length: 5 m
-
Standard cable,
Length: 5 m
Circuit protection devices RCCB, type A, 30 mA RCCB, type B, 30 mA RCCB, type A, 30 mA
EVCC Control unit
IEC 61851-1 Mode 3 compliant, RS485-interface
Terminals up to 2.5 mm 2
Ambient temperature -25°C to 50°C
Storage temperature -30°C to 85°C
Relative humidity
Protection rating
Overvoltage category
Protection rating housing
5 to 95% (no condensation)
I
III
IP54
Dimensions in mm h = 272, w = 220, d = 106
Weight / unit 2920 g 2270 g 3950 g
(1)
Connection to domestic distribution box only via independent supply cable and separate Type B RCB
You can find circuit protection devices for external installations in our main catalogue.

eMH2 powered
by
OUR POWER PACK
FOR PEAK PERFORMANCE

eMH2 Electric Mobility home 2
CHARGING STATIONS
When you need a fast recharge, the eMH2 is the right choice. Charging time is reduced considerably
thanks to a charging capacity of up to 22 kW. The available charge current is individually adjustable,
depending on the current permitted by your domestic supply. Perfect for private and semi-public
areas such as underground and undercover, hotel and company car parks. Thanks to its weatherproof
housing, the eMH1 is also suitable for outdoor and carport installations. The eMH2 is pre-assembled
for installation and ready for use.
· Charging station preconfigured and ready to install
· LEDs indicate charging status
· Lockable lid (access to switching devices)
· Integrated circuit protection devices
· ON/OFF switch for charging station and for interrupting
the recharge process
· can be networked with other charging stations
via RS485 interface
322 322
192 192
435
0
435
435
0
e.on Wallbox e.on Wallbox
EPH I EPH I
22.02.2012 22.02.2012
Specifications EVSE131 EVSE231 EVSE234
Complies with IEC 61851-1/22
Power supply single-phase 230 V / 16 A, 50 Hz 3-phase 400 V / 32 A, 50 Hz 3-phase 400 V / 16 A, 50 Hz
Supply Voltage 230 V 400 V 400 V
Power Supply 16 A 16 A 16 A
Max. recharge load 3.6 KW 11 KW 11 KW
Recharge Socket
Mode 3, IEC 62196-2
Recharge Connector
Mode 3, IEC 62196-1
Recharge Connector
acc. to SAE 1772
Charger Cable
Mode 3, IEC 62196-2
- Type 2 -
- - Type 2
Type 1 - -
Standard cable,
Length 5 Metres
-
Standard cable,
Length 5 Metres
Circuit protection devices RCBO, type A, 30 mA RCCB, type B, 30 mA, MCB RCCB, type B, 30 mA, MCB
EVCC Control Unit
complies with IEC 61851-1 Mode 3, RS485-Interface
Connector Clamps up to 4 mm 2
Ambient Temperature -25°C to 50°C
Storage Temperature -30°C to 85°C
Humidity, relative
Protection Rating
Overvoltage Category
Protection Rating Housing
5 to 95% (no condensation)
I
III
IP54
Dimensions in mm h = 435, w = 320, d = 192
Weight / each
2900 g to 4900 g, depending on version

eMC
THE SLEEK SOLUTION
FOR PUBLIC AREAS

eMC Electric Mobility City
CHARGING STATION
The eMC is a compact, rugged and weatherproof solution for semipublic
areas such as underground and undercover, hotel and company
car parks. Users simply unlock the station with a chip card
and charge their vehicle while parked. An LCD screen indicates
the station’s current operating status.
· Access via RFID card
· protected by FI/LS-switch (RCBO)
· integrated energy meter
Type
EVSE301
Regulations acc. to IEC 621962
Supply voltage
Power supply/
max. charging current
Charging socket
Display
Interface
User identification
230 V / 50 Hz
16 A
DIN 49440 compliant SCHUKO socket
LCD, 2 lines
Ethernet RJ45
RFID 13,56 MHz (MIFARE)
User data storage
Compaq-Flashkarte
Circuit protection devices
Preconfigured and ready to install
with RCBO, type A, 16 A, 30 mA, power meter and contactor
Connecting terminals bis 4 mm 2
Storage temperature - 30 °C…+ 85 °C
Ambient temperature when used - 20 °C…+ 40 °C
Humidity, relative
Protection class
Overvoltage category
Resistance class
Degree of protection for casing
Dimensions
Gewicht/Stück
5…95 % (no condensation)
I
II
I
IP54
503 x 134 x 126 mm
4.000 g

COMPONENTS
FOR CHARGING STATION
EVCC CONTROL UNIT
The EVCC is the core module built into
our charging stations and responsible for
communication with the electric vehicle.
The charging procedure complies with
IEC 61851-1 Mode 3. Potential-free switching
contacts are used for load relay
(EV supply), to lock charge connectors
and for external cooling control. Two external
LEDs can be connected without
additional dropping resistors and indicate
the current system status of the
charging station. Default and target
charge current are set using a networkready
RS485 serial interface and allow
load management. The target current
can be adjusted, even during the charging
process.
complies with IEC 61851-1 Mode 3
Charge current preset at 16 A · Adjustable
from 6 A to 80 A via serial
interface
Art.-NO.
Weight
g / unit
Units /
Pack
Subunits
EVCC 220 3 4
RESIDUAL CURRENT CIRCUIT
BREAKER RCCB
Residual Current Circuit Breaker
(RCCB) · Universal current Type B
4-pole short-delay triggered switching
Art.-No.
TYPE 2 RECHARGE CABLE
complies with IEC 621962 · 32 A 240 /415
V AC · Length: 3 m · splash proof (IP44)
Art.-No.
Weight
g / unit
Units /
Pack
LAK32A3 2.200 1
ADAPTER CABLE · TYPE 1 TO TYPE 2
32 A 230 V AC · Length: 5 m
splash proof (IP44)
Art.-No.
Weight
g / unit
Weight
g / unit
Units /
Pack
RA4303 500 1
Units /
Pack
LAKT2T1 1.200 1
SIGNAL CONTACT
FOR SOCKET OUTLETS
1561.../1562... und 1661.../1662...
16 A / 250 V AC · Signal switch
1 change-over relay · 5 A / 250 V AC
3 A / 0-30 V DC
Art.-NO.
Weight
g / unit
Units /
Pack
SW23C2 10 10
TYPE 2 RECHARGE SOCKET
complies with IEC 621962 · 32 A 240 /
415 V AC · signal contact 2 A 30 V DC
with electrical locking solenoid · 12 V /
200 mA DC solenoid · splash proof (IP44)
Art.-NO.
Weight
g / unit
Units /
Pack
LAD32AV 350 1
Discover our entire
product range:
Catalogue ordering
and further information
available
on our website
www.abl-sursum.com

COMPACT
POWERFUL
INTELLIGENT
Worldwide leadership in connecting
and protecting power
Made in Germany
ABL SURSUM
Bayerische Elektrozubehör GmbH & Co. KG
Ottensooser Straße 22
91207 Lauf / Pegnitz
Postfach 10 02 47
91192 Lauf / Pegnitz
Telefon +49 (0) 9123 188-0 info@abl-sursum.com
Telefax +49 (0) 9123 188-188 www.abl-sursum.com
0000038 / 05.2013