Diamond Drilling Systems. - Hilti
Diamond Drilling Systems. - Hilti
Diamond Drilling Systems. - Hilti
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Parts for mounting and extending<br />
D-R.L rails<br />
Ordering designation Accessory Number Item no.<br />
TS30 TS32 required<br />
DS-RF rail support l l 2 a 00284814<br />
DS-RFP angular cutting plate * l l 2 b00284816<br />
D-CP-ML rail clamp ** l l 1 c 00207137<br />
D-CO-ML taper ** l l 1 d 00232241<br />
D-EP-ML eccentric pin ½" ** l l 2 e 00232244<br />
DS-ES-L end stop *** l l 1 f 00371703<br />
*** For angled and stepped cuts.<br />
*** For connecting all D-R L-type rails (order required number), also included in the D-LP 32 / DS-TS 32 tool set.<br />
*** Each D-R...L rail is supplied complete with two end stops.<br />
Accessories and tools<br />
Ordering designation Accessory Number Item no.<br />
TS30 TS32 required<br />
D-LP32/DS-TS32 tool set * l l 1 a 00370690<br />
HVLP 46 hydraulic oil (25 litres) l l 1 00221201<br />
D-PRT pressure release valve, FH ¼" ** l l 1 00258005<br />
D-PRT pressure release valve, PH ¾" ** l l 1 00258007<br />
D steel wedge, 130×70×20 ** l l 2–6 b 00041910<br />
Y-piece water valve for optimum water regulation l l 1 c 00339380<br />
HKD-D M12×50 flush anchor l l 50 d 00252961<br />
BB blow-out bulb ** l l 1 e 00059725<br />
HSD-G M12½" hand setting tool ** l l 1 f 00243743<br />
RC-LP32/TS5-E shoulder belt with fastener 1 g 00373243<br />
** See separate brochure “LP 32 / TS 32 tools and accessories” (item no. 00370691) for list of contents and item no’s.<br />
** Also included in the D-LP 32 / DS-TS 32 tool set.<br />
DS-FCA-110 flush-cutting flange<br />
Ordering designation Accessory Number Item no.<br />
TS30 TS32 required<br />
DS-FCA-110 flush-cutting flange, complete * l l 1 a 00258436<br />
DS-FCA-110FF flange, individual part l l 1 b00307188<br />
* Includes screws, seals, grip and tools. Suitable for use with blades with 60 mm dia. mounting hole and 110 mm pitch circle diameter.<br />
Fits all <strong>Hilti</strong> TS saw heads with hex. shaft.<br />
Accessories / wearing parts for the DS-FCA-110<br />
Set of 6 screws l l 1 00242383<br />
Set of 3 screws l l 1 00242384<br />
The DS-FCA-110 makes setting up easy<br />
Bring the blade into position. Move the saw arm, under hydraulic<br />
power, into the blade-mounting hole.<br />
<strong>Diamond</strong> <strong>Systems</strong><br />
Secure the blade on the saw arm. Fit the blade guard and begin sawing.<br />
0800 886 100 | www.hilti.co.uk<br />
1850 287 387 | www.hilti.ie <strong>Hilti</strong>. Outperform. Outlast.<br />
164<br />
a<br />
d<br />
e f<br />
g<br />
a<br />
f<br />
c<br />
a b<br />
d<br />
b<br />
b<br />
c<br />
e<br />
3