Diamond Drilling Systems. - Hilti

Diamond Systems
DS-WS 10 compact diamond
wire saw
Big prospects for small openings
Uses
n Small openings without overcutting at corners
(e.g. ventilation / air-conditioning ducts)
n Sawing through columns and beams
n Cutting or extending openings for doors and windows
n Cutting openings where access is difficult or where noise must be
kept to a minimum
Materials
n Concrete, masonry
Technical data DS-WS 10
Nominal power rating: 10 kW
Oil flow rate: max. 50 l/min.*
Oil pressure: max. 210 bar*
Recommended operating pressure: 80–120 bar*
Drive pulley diameter: 280 mm
Guide pulley diameter: 200 mm
Drive speed: up to 1900 min. r.p.m.
Cutting speed: up to 27 m/sec.
Diamond wire: 8–12 mm dia.
Wire storage capacity: max. 7.3 m
Pneumatic advance: max. 8 bar
Dimensions LxWxH: 692x536x1221 mm
Weight: approx. 69 kg
Single module: approx. 22 kg
* Specifications for other suitable power units: 14–32 kW
DS-WS 10
compact wire saw basic set
Ordering designation Package contents Item no.
DS-WS10 compact wire saw, complete 1 00376766
Items supplied: Positioning template, base plate, guide rail with advance unit, drive
unit, guide pulleys, guards, hoses, water nozzles, water valve, tool set, wrench,
compressor with control panel.
Advantages
n Hilti’s smallest and lightest wire saw
n Quickly set up and made ready for use (no part heavier than 22 kg)
n Smooth, gentle pneumatic advance for optimum cutting
performance, superior operating convenience and maximum safety
n Low noise, high reliability and little maintenance required
n Complete, coordinated range of accessories
169
LIFETIME
SERVICE
Lifetime Lifetime
REPAIR
COST LIMIT
2
Years
NO
COSTS
MANUFACTURERS
WARRANTY
Hilti. Outperform. Outlast.
www.hilti.co.uk | 0800 886 100
www.hilti.ie | 1850 287 387