Maestro High Pressure Fan Coil Units - BTK
Maestro High Pressure Fan Coil Units - BTK
Maestro High Pressure Fan Coil Units - BTK
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Remote electronic controls<br />
Type<br />
Code<br />
COM 9053022<br />
Remote<br />
manual speed control.<br />
Electronic control accessories<br />
Type<br />
Code<br />
TME 3021091<br />
TME low temperature cut-out thermostat<br />
To be fitted between the coil fins; when connecting the control,<br />
the TME cable must be separated from the power supply wires.<br />
To be used with the following controls: TMO-T and TMO-T-AU.<br />
It stops the fan when the water temperature is lower than 38°C<br />
and it starts the fan when is higher than 42°C.<br />
Type<br />
Code<br />
TMM 9053048<br />
TMM low temperature cut-out thermostat<br />
To be installed in contact<br />
with the hot water circuit.<br />
To be used only with MO-3V control.<br />
For units working on heating only.<br />
It stops the fan when the water<br />
temperature is lower than 32°C and<br />
it starts the fan when is higher than 42°C.<br />
Type<br />
Code<br />
CH 15-25 9053049<br />
Change-Over CH 15-25<br />
Automatic summer/winter switch<br />
to be installed in contact<br />
with the water circuit<br />
(for 2-tube installations only).<br />
To be used with the following controls:<br />
TMO-T and TMO-T-AU.<br />
27