pdf, 1775 Kbytes

Products are manufactured under an NSAI registered I.S EN ISO9001:2008 Quality System, registration no: 19.2769
Products are manufactured under an NSAI registered I.S EN ISO9001:2008 Quality System, registration no: 19.2769
ANALYTICAL VOLUMETRIC SOLUTIONS
READY TO USE AQUEOUS SOLUTIONS (CONTINUED)
Certificate of Analysis
Analytical Volumetric Solution
Hydrochloric Acid 1.0M (1.0N)
Certificate of Analysis
Analytical Volumetric Solution
Iodine 0.05M (0.1N)
ELECTRODES ARE AVAILABLE FROM
REAGECON AND ARE COMPATIBLE
WITH ALL MAKES AND MODELS OF
AUTO-TITRATORS
Product No:
H2100
Lot No:
H210010J1
Expiry date: 28/09/2012
Mean Molarity:
1.001 M
Date of measurement: 20/09/2010
Specification:
0.999 -1.001M
Method:
Tested by potentiometric titration, to in-house method TPATA. Reagecon Diagnostics
Ltd. is accredited by the Irish National Accreditation Board, under scope 264T, for the
test method ,TPATA, used in the determination of this product
Traceability:
This volumetric solution was checked by means of Sodium Hydroxide Analytical
Volumetric Standard. This volumetric standard is directly traceable to a Standard
Reference Material of National Institute of Standards and Technology (USA), 84k
Potassium Hydrogen Phthalate. All raw materials used to prepare this product are of
high purity.
This certificate relates solely to the lot number given above. The uncertainty of
measurement has been calculated not to exceed ± 0.1% at 95% confidence level, ie.
coverage factor k =2
Date of issue of the certificate: 20/09/2010
Q.C. Supervisor Margaret Dornan
Complementary information relative to this product is available at www.reagecon.com
Page 1 of 1.This Certificate must not be reproduced except in full. Rev-10J3
Reagecon Diagnostics Ltd.
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Tel +353 61 472622, Fax: +353 61 472642
Email: sales@reagecon.ie, www.reagecon.com
Product No:
I2005F
Lot No:
I200510M1
Expiry date: 28/12/2011
Mean Molarity: 0.05005 M @ 20°C
Date of measurement: 22/12/2010
Specification:
0.04995 -0.05005M
Method:
Tested by potentiometric titration, to in-house method TPATRX2. Reagecon Diagnostics
Ltd. is accredited by the Irish National Accreditation Board, under scope 264T, for the
test method ,TPATRX2, used in the determination of this product.
Traceability:
This volumetric solution was checked by means of Sodium Thiosulphate Analytical
Volumetric Standard. This volumetric standard is directly traceable to a Standard
Reference Material of National Institute of Standards and Technology (USA), 136e
Potassium Dichromate. All raw materials used to prepare this product are of high purity.
This certificate relates solely to the lot number given above. The uncertainty of
measurement has been calculated not to exceed ± 0.1% at 95% confidence level, ie.
coverage factor k =2
Date of issue of the certificate: 22/12/2010
QC Technician Derdre Madigan
Complementary information relative to this product is available at www.reagecon.com
Page 1 of 1.This Certificate must not be reproduced except in full. Rev-10M3
Reagecon Diagnostics Ltd.
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Tel +353 61 472622, Fax: +353 61 472642
Email: sales@reagecon.ie, www.reagecon.com
Product NO. No. Description normality Molarity Pack Size
N20020W Silver Nitrate 0.02N 0.02M 2.5L
N20020F
1L
N20014W Silver Nitrate 0.0141N 0.0141M 2.5L
SA2005W Sodium Arsenite 0.1N 0.5M 2.5l
SC20505 Sodium Carbonate 1.0N 0.5M 5L
SC20501
1L
SC20055 Sodium Carbonate 0.1N 0.05M 5L
SC20051
1L
NACL2015 Sodium Chloride 0.1N 0.1M 5L
NACL2011
1L
NACL20055 Sodium Chloride 0.05N 0.05M 5L
NACL20051
1L
SB250010 Sodium Hydroxide 5.0N 5.0M 10L
S25005
5L
S25001
1L
SB235710 Sodium Hydroxide 3.57N 3.57M 10L
S23575
5L
S23571
1L
SB220010 Sodium Hydroxide 2.0N 2.0M 10L
S22005
5L
S22001
1L
S212025 Sodium Hydroxide 1.2N 1.2M 25L
SB212010
10L
SB21205
5L
SB210010 Sodium Hydroxide 1.0N 1.0M 10L
S21005
5L
S21001
1L
S20625 Sodium Hydroxide 0.6N 0.6M 25L
S2065
5L
SB205010 Sodium Hydroxide 10L
S20505 0.5N 0.5M 5L
S20501
1L
www.reagecon.com
Reagecon - Delivering the correct result
25