special worldwide 2009 - Spekuma Kullager AB

special worldwide | 2009
Thread Repair
Universal Thread Repair Tool Sets
3 or 4 pieces,
in in plastic box
For outside thread 4 – 13 mm ( 5 ⁄12” – 1 ⁄2”) and inside thread 5 – 12 mm ( 13 ⁄64”– 1 ⁄2”)
Simple and quick fixation due to knurled screw
Manual operation will suffice
Also suitable for aluminium threads
Repairs right- and left-hand threads
Applicable to all forms of metric and non-metric threads
TOPSELLER!
New
1
Satz-Contents EAN-No.
4000896+
842 AIG-1/4
4 pieces
842 IG-1/3
3 pieces
1 Tool for outside threads +
2 Tools for inside threads +
protective covers for aluminium threads
2 Tools for inside threads +
protective covers for aluminium threads
(There is an empty compartment provided in the
plastic box for HAZET 842 AG-1)
153428
153411
open Auf close Zu rotate Drehen
Universal Thread
Repair Tool
For thread diameters
4 – 13 mm ( 5 ⁄32”– 1 ⁄2”)
Quick fixation with setting screw (A´)
Automatical adjustment of the blade on
each thread pitch
For plugging taps of right
and left threads (Attention
to direction of rotation!)
For all metric and
non-metric threads
open Auf close Zu rotate Drehen
Universal Thread
Repair Tool
For thread diameters
16 – 38 mm ( 5 ⁄8”–1 1 ⁄2”)
Quick fixation due to adjusting
screw (A)
Blades automatically adapted to
any thread pitch within range
Repairs right- and left-hand threads
(observe direction of rotation!)
Applicable to all forms of metric
and non-metric threads
Turn adjusting
screw (A) to raise
842 AG-1 EAN-No. 4000896140718
blades (B). Place blades into grooves direction of the
842 AG-3 EAN-No. 4000896149230
Thread Repair Tool
over thread to be
repaired.
Turn adjusting
screw (A) to lower
of thread and
tighten lightly
Rotate Thread
Repair Tool in the
arrow as shown
Turn adjusting
screw (A) to raise
blades (B). Place
Thread Repair Tool
over thread to be
repaired.
Turn adjusting
screw (A) to lower
blades into grooves
of thread and
tighten lightly
Rotate Thread
Repair Tool in the
direction of the
arrow as shown
Combined Drill / Tapping
Bit Set 7 pieces,
in plastic box
Universal application on materials of medium
hardness
Drilling the hole and tapping without having to
change the tool - 4 tools in one (drill bit, taper tap,
plug tap and bottoming tap)
For tapping through threads with a thread depth of
twice the thread diameter. (Ensure the speed (rpm) is
adapted to the corresponding working step.)
For cordless screwdrivers/drills and power drills with
forward and reverse
Contents:
6 Drill/Tapping Bits
M 3 4 5 6 8 10
1 Bit Holder with
clamping spring
h D 6.3 = 1 ⁄4”
g C 6.3 mm
Single-Cut
Tap Set 6 pieces,
in plastic box
High-quality HSS-G tapping bits
One working step: taper tap - plug tap - bottoming
tap combined in one tool
For cordless screwdrivers/drills and power drills with
forward and reverse
Contents:
6 tapping bits, form D
M 3 4 5 6 8 10
Single-Cut Tap /
13 pieces, in
Drill Set plastic box
High-quality HSS-G twist drill bits
One working step: taper tap – plug tap –
bottoming tap combined in one tool
For cordless screwdrivers/drills and power drills with
forward and reverse
Bit holder with clamping spring (non magnetic) allows
fast changing of the drill and tapping bits
Contents:
6 Tapping Bits, form D
M 3 4 5
6 8 10
6 Twist Drill Bits,
HSS-G
2.5 3.3 4.2
5.0 6.8 8.5 mm
1 Bit Holder with
clamping spring
h D 6.3 = 1 ⁄4”
g C 6.3 mm
842 B/7 EAN-No. 4000896125159 842 G/6 EAN-No. 4000896125142 842 BG/13 EAN-No. 4000896125135
22 www.hazet.com