big-bass-wheel-pro-t.. - BMI Gaming

More documents

Recommendations

Info

INSPECTING THE GAME Inspect the game for any damaged, loose, or missing parts. If damage is found please contact the carrier first then contact Bay Tek Games at 920.822.3951 or e-mail at service@baytekgames.com to order replacement parts. PARTS INCLUDED: 2 SIDE GUARD SAFETY "FINS" - RIGHT SIDE PART NUMBER WABBW0070 - LEFT SIDE PART NUMBER WABBW0071 -SAFETY GUARDS HARDWARE AAKIT-BBW1-HDWR (8) A5BOCG140 (9) A5NUHX060 (9) A5WASI010 (1) A5BOHH115 (2) A5WAFL060 1 BOBBER ASSEMBLY 1 POWER CORD To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SERVICE CONNECTIONS / POWER REQUIREMENTS All Bay Tek games are 110V unless specifically ordered 220V. The game will draw 2-3 AMPS at start up. Outlets should be rated for 20 AMPS or higher. The game voltage can be found on the serial number decal, see below. SUITABLE FOR INDOOR USE ONLY Model: AAGM-1234 Software Version: 5-678 Game Serial Number: 9-1234 PCB Serial Number: 567,789 Manufacture Date: 7/07/2007 Inspected By: R.S. GAME VOLTAGE WILL BE HERE AMUSEMENT MACHINE ATTENTION Be sure the electrical power matches the game requirements. See the serial number decal located on the back of the game cabinet. ATTENTION Always plug this game into a grounded circuit. ATTENTION If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
Page 1 and 2: R. Schreiber To Purchase This Item,
Page 3 and 4: SERVICE FIRST NETWORK Join our excl
Page 5 and 6: GAME MEASUREMENTS To Purchase This
Page 7: SAFETY PRECAUTIONS BIG BASS WHEEL P
Page 11 and 12: SETTING UP YOUR GAME Step 3 From in
Page 13 and 14: SETTING UP YOUR GAME Step 8 Use the
Page 15 and 16: ACCESS THE OPERATOR MENU BIG BASS W
Page 17 and 18: GAME VOLUME -- ATTRACT VOLUME -- RE
Page 19 and 20: AVAILABLE PATTERNS 6-8 TICKETS PER
Page 21 and 22: AVAILABLE PATTERNS 10-13 TICKETS PE
Page 23 and 24: ONE TICKET DISPENSER AND ONE THERMA
Page 25 and 26: ONE THERMAL PRINTER ONLY Hybrid Mod
Page 27 and 28: ALL THREE MODELS From this point fo
Page 29 and 30: WHEEL POSITION -- INPUTS/OUTPUTS --
Page 31 and 32: GAME STATISTICS TOTAL GAMES -- TOTA
Page 33 and 34: ADDING PRINTER PAPER PLEASE SEE THE
Page 35 and 36: TROUBLESHOOTING GUIDE PROBLEM PROBA
Page 41 and 42: TROUBLESHOOTING GUIDE-SCORING ISSUE
Page 43 and 44: TROUBLESHOOTING GUIDE - SCORING ISS
Page 45 and 46: TROUBLESHOOTING GUIDE - SCORING ISS
Page 47 and 48: DOOR OPEN ERROR THIS IS A SAFETY MA
Page 49 and 50: ENCODER WHEEL SENSOR THE ENCODER SE
Page 51 and 52: ADJUSTING THE ENCODER WHEEL SENSOR
Page 53 and 54: ADJUSTING THE BRAKE 1. IF THE BRAKE
Page 55 and 56: REMOVING THE HANDLE THE HANDLE IS D
Page 57 and 58: POWER SUPPLY DIAGNOSTICS 1. CHECK T
Page 59 and 60:
CIRCUIT BOARD WIRING PIN OUT AACB19
Page 61 and 62:
REPAIR/MAINTENANCE LOG If you need
Page 63 and 64:
TECHNICAL SUPPORT Excellent custome
Page 65 and 66:
PARTS PART NUMBER DESCRIPTION A5SW2
Page 67 and 68:
PARTS PART NUMBER DESCRIPTION AADE1
show all

big-bass-wheel-pro-t.. - BMI Gaming

Create successful ePaper yourself

Delete template?

Save as template?