Danly IEM Wear Products 1877 KB pdf - Anchor Danly
Danly IEM Wear Products 1877 KB pdf - Anchor Danly
Danly IEM Wear Products 1877 KB pdf - Anchor Danly
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.danly.com<br />
NAAMS<br />
U & V Blocks – Metric<br />
Product Features<br />
These 65, 75, 125 and 175mm U and V Blocks are<br />
manufactured to metric dimensions and fully meet the<br />
NAAMS standard. The U Block is manufactured from<br />
hardened steel. The V block is self-lubricating in design<br />
and is available in either aluminum bronze with oilimpregnated<br />
graphite plugs or steel with oil-impregnated<br />
graphite plugs.<br />
Q75US150 & Q75VS150G<br />
FIGURE A - Steel U Block<br />
FIGURE B - Self-lubricating V Block<br />
FIGURE C - Assembly<br />
MATERIALS:<br />
U Blocks are manufactured from high<br />
quality carburized steel. They are<br />
precision ground and hardened to<br />
Rc56-62.<br />
V Blocks are manufactured from<br />
aluminum bronze material with oilimpregnated<br />
graphite plugs or steel<br />
with oil-impregnated graphite plugs.<br />
TOLERANCES:<br />
Between screw holes: ± 0.12mm<br />
Between dowel holes: ± 0.10mm<br />
Unless otherwise noted: ± 0.25mm<br />
RECOMMENDED MOUNTING SCREWS & DOWELS:<br />
<br />
<br />
<br />
<br />
65mm blocks: M12 S.H.C.S./M12 DOWELS<br />
75mm blocks: M12 S.H.C.S. /M12 DOWELS<br />
125mm blocks: M16 S.H.C.S. M16 DOWELS<br />
175mm blocks: M16 S.H.C.S. M16 DOWELS<br />
32
Change language