Multiparameter Photometer - Comlibris

More documents

Recommendations

Info

“C” Version Supplied as a kit CAL CHECK Calibration Validation With HANNA’s exclusive CAL CHECK validation function users are able to verify the performance of the instrument at any time. Taking just a few short steps, the validation procedure is user friendly and ensures that the meter is properly calibrated. iButton® Tags are Easy to Install Peace of mind. Install TAGs near your sampling points for quick and easy iButton® readings. Each TAG contains a computer chip with a unique identification code encased in stainless steel. You can install a practically unlimited amount of TAGs. Additional TAGs can be ordered for all of your traceability requirements. Specifications HI 96711 Range Resolution Precision Light Source Light Detector Power Supply Auto-off Environment Data-Logging Serial Interface Free Chlorine Total Chlorine ORDERING INFORMATION HI 96711 is supplied with (2) sample cuvets with caps, (10) reagent powder packets, (4) batteries and instruction manual. HI 96711C is supplied with (2) sample cuvets with caps, (3) CAL CHECK cuvets, (10) reagent powder packets, cuvet cleaning cloth, (5) iButton® tags, (4) batteries, scissors and instruction manual in a hard carrying case. REAGENTS HI 93701-01 Reagents for 100 tests (Free Chlorine) HI 93701-03 Reagents for 300 tests (Free Chlorine) HI 93711-01 Reagents for 100 tests (Total Chlorine) HI 93711-03 Reagents for 300 tests (Total Chlorine) 0.00 to 5.00 mg/L 0.00 to 5.00 mg/L 0.01 mg/L 0.00 to 3.50 mg/L; 0.10 mg/L above 3.50 mg/L ±0.02 mg/L to 1.00 mg/L Tungsten lamp with narrow band interference filter 525 nm Silicon Photocell (1) 9V battery After 10 min of non-use in measuring mode After 1 hour of non-use in calibration mode 0 to 50°C (32 to 122°F); RH max 95% non-condensing 99 records RS232 with 9600 baud rate Dimensions 216 x 83 x 65 mm (8.5 x 3.3 x 2.5”) Weight Method It’s easy to add new tags later on to increase an already existing database. HI 96711 Free/Total Chlorine Photometer with T.I.S. — Tag Identification System Technology 420 g (17 oz.) Adaptation of USEPA 330.5 Method and Standard Methods 4500-Cl G HI 95701-11 CAL CHECK TM standard cuvets for Free Chlorine HI 95711-11 CAL CHECK TM standard cuvets for Total Chlorine SOLUTIONS HI 93703-50 Cuvet cleaning solution, 250 mL ACCESSORIES HI 920005 iButton® TAGs (5) HI 92000 Software for PC connection, Windows® compatible HI 920011 Serial cable for PC connection HI 731318 Cuvet cleaning cloth (4) HI 731331 Measuring cuvets (4) HI 731335 Cuvet caps (4) Single Parameter Photometers Portable Meters WWW. HANNAINST. COM 111
Single Parameter Photometers Portable Meters HI 96 series Water Resistant Single Parameter Photometers with HANNA’s Exclusive CAL CHECK Peace of mind. When performing measurements you need to know that the instrument you are using is right on. With HANNA’s exclusive CAL CHECK feature you can now rest assured. Simply insert the factory calibrated standard of a known concentration and verify that your instrument is accurate. Photometers Designed for Laboratory Benchtops and Handheld Field Use READ/TIMER function Counts down to appropriate time interval before a reading is displayed. This feature ensures consistency in measurements across multiple users. HANNA’s new line of single parameter photometers includes instruments to measure ammonia, chlorine at several ranges, copper, anionic detergents, fluoride, iron, nitrite, phosphate, phosphorus and more. This series features water resistance, a large dual-level LCD, an advanced optical system and HANNA's exclusive CAL CHECK validation function. The advanced optical system is based on a special tungsten lamp (model HI 96715 features an LED) and a narrow band interference filter assuring accurate readings every time. With the exclusive CAL CHECK validation function users are able to verify the performance of the instrument at any time. Taking just a few short steps, the validation procedure is extremely user friendly and ensures that the meter is properly calibrated. Just use the exclusive HANNA ready-made, NiST traceable standards to verify the performance of the instrument and recalibrate if necessary. All instruments are factory calibrated and the electronic and optical design minimizes the need for frequent calibration. Ideal for field applications, these meters are water resistant and the lamp and filter measuring system is protected from dust or dirt by a transparent cup. Display codes aid the user in routine operations and include a low battery warning. An auto shut-off feature turns the instruments off after 10 minutes of non-use. The cuvet is made from special optical glass to obtain best results and an exclusive positive-locking system ensures that the cuvet is in the same position every time it is placed into the measurement cell. The cell is designed to fit a wide mouth cuvet making it easier to add both samples and reagents. The reagents are in powder or liquid form and the amount of reagent is precisely dosed to ensure maximum repeatability. • Large, dual-level LCD • Water-resistant • Accuracy verification • User calibration • Certified calibration & verification standards • EPA compliant • Custom ranges • Long battery life • Order the “C” version for a complete kit Calibration Date on Display The HI 96 series of photometers display the last time calibration was performed so you may schedule routine calibrations—ideal for ISO and Good Laboratory Practice environments. 112 LABORATORY PRODUCTS CATALOG | 4 TH EDITION
Page 1 and 2: Photometers Bench Meters HI 83200 M
Page 3 and 4: Multiparameter Photometers Bench Me
Page 5: Single Parameter Photometers Portab
Page 9 and 10: Photometers Reagents Standard Reage

Multiparameter Photometer - Comlibris

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?