Humboldt Catalog - Asphalt - Comlibris

Marshall Compactors1.800.544.7220 • www.humboldtmfg.comAsphaltHeavy-Duty, Automatic Single Compactor with Rotating MoldThe Humboldt Automatic Marshall Compaction Machine is designed to providea stable and rigid mechanism for producing 4" or 6" diameter asphalt pills usedin Marshall tests. The heavy-duty design stands up well to the constant jarringcaused by the compaction process. The Humboldt Compaction Machinefeatures a rotating mold mechanism and a hammer with a beveled foot,which together produce a kneading action when producing test pills.The machine's automatic counter allows the operator to preset the numberof blows wanted and will turn off the machine when completed. After thenumber of blows has been set, the operator can start the machine with apush button and keep track of the number of blows on an LED readout.The counter can be operated on either 115V/60Hz or 230V/50Hz, switchableinside the cover. A cam-action lever operates the integral mold holder tofacilitate insertion and removal of the stability mold.Machines can be ordered as 4" or 6" machines, but can be altered to easilyaccommodate the other size by purchasing a hammer and test molds of thedesired size. Each machine includes: the mechanical compactor, an automaticcounter, tapered-foot hammer assembly for rotating mold models or a flat-foothammer assembly for the stationary mold models, (1) stability mold, and(1) package of paper discs. Shipping wt. 400 lbs. (181.4kg).Complies with ASTM D6926, D5581, AASHTO T245 and PTM705Heavy-Duty, Automatic Single Compactor with Rotating MoldDescriptionFor 4" diameter specimens. 115V 60HzFor 6" diameter specimens. 115V 60HzFor 4" diameter specimens. 230V 60HzFor 6" diameter specimens. 230V 60HzFor 4" diameter specimens. 230V 50HzFor 6" diameter specimens. 230V 50HzModelH-1364RH-1366RH-1364R.2FH-1366R.2FH-1364R.5FH-1366R.5FHeavy-Duty, Automatic Single Compactor with Stationary MoldIdentical to the machines above except these have a stationary mold (non-rotating)and use a flat bottom hammer.Heavy-Duty, Automatic Single Compactor with Stationary MoldDescriptionModelFor 4" diameter specimens. 115V 60Hz H-1364For 6" diameter specimens. 115V 60Hz H-1366For 4" diameter specimens. 230V 60HzH-1364.2FFor 6" diameter specimens. 230V 60HzH-1366.2FFor 4" diameter specimens. 230V 50HzH-1364.5FFor 6" diameter specimens. 230V 50HzH-1366.5F136

www.humboldtmfg.com • 1.800.544.7220Marshall CompactorsReplacement Parts for Heavy-Duty, Automatic Single CompactorsDescriptionModel4" hammer with tapered foot (rotating mold) H-1360A6" hammer with tapered foot (rotating mold) H-1360B4" hammer with flat foot (stationary mold) H-1360AF6" hammer with flat foot (stationary mold) H-1360BFLift Chain for H-1364, H-1366 SeriesH-1360.21Replacement pedestal for H-1364 and H-1366 CompactorsH-1347MReplacement Counter and proximity switch for CompactorsH-1334BAReplacement Counter and proximity switch for Compactors, 230V H-1334BA.4FH-1360AH-1360A.30H-1360A.38AsphaltH-1360A.37H-1360A.31H-1360A.37LH-1360B.30H-1360A.37RH-1360A.36H-1360A.32H-1360A.33.1H-1360A.33H-1360A.34H-1360BH-1360A.32.1H-1360A.32.2H-1360A.35orH-1360AF.35H-1360A.35.1H-1360A.32.3H-1360B.35orH-1360BF.35Hammer Assemblies and Replacement PartsDescriptionModelDescriptionModelCompaction hammer, 10 lb (for 4" mold)Compaction hammer, 22.5 lb (for 6" mold)Hammer slide shaftSpring retainer, anvilSpring washer, anvilHammer foot, 4" taperedHammer foot, 4" flatHammer foot, 6" taperedHammer foot, 6" flatHammer release pin, left handHammer release pin, right handH-1360A.30H-1360B.30H-1360A.32H-1360A.32.1H-1360A.33H-1360A.35H-1360AF.35H-1360B.35H-1360BF.35H-1360A.37LH-1360A.37RAnvil release arm weldmentH-1360A.38Hammer release armH-1360A.38.1Anvil, topH-1360A.38.2SpringH-1338.34SpringH-1360A.311/4" dia. x 1" large roll pin H-1360A.32.23/16" dia. x 1-1/2" roll pin H-1360A.32.3Internal retaining ringH-1360A.33.15/16" dia x 1/2" large dowel pin H-1360A.35.11/4-20 x 1/2" large truss head screw H-1360A.361/4" dia. x 1-3/8" Large dowel pin H-1360A.37137

Marshall Compactors1.800.544.7220 • www.humboldtmfg.comAsphaltH-1336DH-1346DH-1356DStandard-Duty 4" Automatic, SingleCompactor with Stationary MoldEase sample preparation with an automaticmechanical compactor. Apparatus compactssamples at a preset number of hammer blowsand shuts off on completion. Unit includesmechanical compactor, automatic counter,oak compaction pedestal and H-1341 moldassembly. Additional mold and hammerassemblies are recommended. Complies withASTM D6926, D5581, AASHTO T245 andPTM705. Shipping wt. 198 lbs (89.8kg)Standard-Duty 4" Automatic, DoubleCompactor with Rotating MoldAutomatically compacts dual samples at apreset number of hammer blows and shutsoff automatically on completion. Unit includesmechanical compactor, automatic counter,oak pedestal and mold assembly. Overalldimensions: 10 x 21 x 66"H. Complies withASTM D6926, D5581, AASHTO T245 andPTM705. Shipping wt. 265 lbs (120.2kg)Standard-Duty 4" Automatic, TripleCompactor with Rotating MoldTriple simultaneous specimen compactionsare produced automatically at a presetnumber of hammer blows. Machine shutsoff on completion. Units include mechanicalcompactor, automatic counter, oak pedestaland mold assembly. Overall dimensions:16 x 22 x 66"H. Complies with ASTM D6926,D5581, AASHTO T245 and PTM705.Shipping wt. 400 lbs (181.4kg)DescriptionCompactor, 115V 60HzCompactor, 230V 60HzCompactor, 230V 50HzModelH-1336DH-1336D.2FH-1336D.5FDescriptionCompactor, 115V 60HzCompactor, 230V 60HzCompactor, 230V 50HzModelH-1346DH-1346D.2FH-1346D.5FDescriptionCompactor, 115V 60HzCompactor, 230V 60HzCompactor, 230V 50HzModelH-1356DH-1356D.2FH-1356D.5FReplacement Parts for Standard-Duty, Automatic CompactorsH-1338AH-1338BH-1338CDescriptionModel4" hammer with flat foot (stationary mold) for H-1336D H-1338A4" hammer with tapered foot (rotating mold) for H-1346D, H-1356D H-1338B4" hammer with “Canadian” tapered foot (rotating mold)for H-1346D, H-1356DH-1338CLift Chain for H-1336D, H-1346D and H-1356DH-1336.21Replacement Counter and proximity switch for CompactorsH-1334BReplacement Counter and proximity switch for Compactors, 230V H-1334B.4FH-1334BH-1334B.4F138

www.humboldtmfg.com • 1.800.544.7220Marshall CompactorsH-1338.40H-1338.29Hammer Assemblies and Replacement PartsDescriptionModelH-1338.40.1H-1338.28H-1338.30H-1338.28.1H-1338.40ACompletelift catchassemblyClevis pin with screwLocator guideHex head boltWasherNutSpacerHammer handleH-1338.29H-1338.25H-1338.25.1H-1338.25.2H-1338.25.3H-1338.25.4H-1338.26H-1338.36H-1338.31H-1338.37Spring pinHammer rodKeyHammer weight (complete)PlugSpringH-1338.26.1H-1338.27H-1338.27.1H-1338.32H-1338.33H-1338.34AsphaltHammer foot, flatH-1338.35Hammer foot, taperedH-1338.38H-1338.25H-1338.25.2H-1338.25.1Hammer foot, Canadian specScrew for footH-1338.39H-1338.35.1H-1338.25.3H-1338.25.4Lift Catch Assembly and Replacement PartsDescriptionModelH-1338.26.1Complete lift catch assemblyH-1338.40ARelease blockH-1338.28H-1338.26H-1338.32PinClevis pinH-1338.28.1H-1338.29Lift catchH-1338.30H-1338.27H-1338.33SpringScrewH-1338.31H-1338.36H-1338.34WasherRelease housingH-1338.37H-1338.40H-1338.27.1H-1338.27Screw for release housingH-1338.40.1H-1338.35.1H-1338.35 orH-1338.38 orH-1338.39Replacement Pedestal for H-1336 Marshall Compactor— H-1347MReplacement Pedestal for H-1346 Marshall Compactor— H-1347.2MReplacement Pedestal for H-1356 Marshall Compactor— H-1347.3MH-1347M139

Marshall Molds & Accessories1.800.544.7220 • www.humboldtmfg.com6" Marshall Compaction Mold— H-13676" stability compaction mold for preparing test specimens with the H-1366 andH-1366R Compactors. Can be used with rotating or stationary mold models.Complies with ASTM D5581. Shipping wt. 10 lbs. (4.5 kg)AsphaltH-1367H-1341H-13374" Marshall Compaction Mold (Rotating Mold)— H-13374" stability compaction mold for preparing test specimens with all rotating moldcompactors (H-1346, H-1356 and H-1364R). Base plate of mold is designed tolink with rotating base feature of compactors causing the mold to rotate duringcompaction. Forming mold is 4" (102mm) ID by 3" (76mm) high.Complies with ASTM D6926. Shipping wt. 10 lbs. (4.5kg)4" Marshall Compaction Mold (Stationary Mold)— H-13414" Stability compaction mold for preparing test specimens with H-1364, H1336Dmechanical compactors and H-1340/H-1345 Hand Compactors. Consists of baseplate, forming mold and collar. Molds are machined from seamless tubing andplated. Base plate and collar are interchangeable with either end of the formingmold. Forming mold is 4" (102mm) ID by 3" (76mm) high. Use with H-1336mechanical compactor and H-1340 hand compactor only.Complies with ASTM D6926. Shipping wt. 10 lbs. (4.5 kg)H-1341PH-1361PH-13374" Paper Disks (1000 pkg)— H-1341P6" Paper Disks (500 pkg)— H-1361PCircular, smooth-edged 4" or 6" diameter disc fit in bottom of H-1337 (4"),H-1341 (4") or H-1367 (6") compaction molds before introducing mixture priorto compaction test. Facilitates removal of sample specimen from mold.Shipping wt. 10lbs.Marshall Sample Storage Can— H-1331Lidded, 2 lb can for storing Marshall samples.H-1348H-1363H-13314" Mold Extractors— H-13486" Mold Extractors— H-1363Used with compression tester for removing 4" or 6" compaction moldspecimens. Shipping wt. 8 lbs. ( 3.6kg).H-1353AHand-Operated Sample Ejector— H-1353ADesigned for lab and field use to extract asphalt samples from either 4" or 6"compaction molds. The ejection force is generated by means of a 3-ton(27.7kN) capacity hand-operated hydraulic jack. The cast-aluminum ejector headassembly can be positioned at different heights through the use of quick releasepins. This enables the operator to easily match the ejection travel to the heightof the mold being used. Overall dimensions 13"W x 6"D x 27"H(330 x 152 x 686mm).Motorized Sample Ejector— H-1355Motorized Sample Ejector, 220V 60Hz— H-1355.4FSimilar in design and construction to the H-1353A series sample ejector, thismodel features the use of a 5-ton capacity motorized hydraulic pump andram assembly. The unit incorporates extended upright rods in order toaccommodate both standard 4" or 6" asphalt compaction molds, as well asthe taller gyratory compaction molds. Overall dimensions excluding pump13"W x 6"D x 29"H (330 x 152 x 737mm).H-1355140

www.humboldtmfg.com • 1.800.544.7220Marshall Hand CompactorHand Compactor Set for 4" Molds— H-1345Compactor set that facilitates hand compaction of 4" Marshall specimens.Set features oak pedestal with hammer support rod, which holds hammerin perpendicular to base position during compaction. Also featuresa mold holder, which keeps the mold securely positioned duringcompaction. Set includes: H-1340 Compaction Hammer; H-1347 Pedestalwith steel plate; H-1341 Compaction Mold; H-1343 Compaction MoldHolder; H-1345.6 Hammer Support Rod, and H-1345.5 Adjustable Guide.Complies with ASTM D6926. Shipping wt. 165 lbs. (74.8 kg)4" Hand Compaction Hammer— H-1340Compacts asphalt mixture in the compaction mold. Flat circular face is3-7/8" (98mm) dia.; hammer is 10 lb. (4.54kg.) sliding weight and has afree fall of 18" (457mm). Two compaction hammers are recommended.Shipping wt. 20 lbs. (9.0kg)Asphalt4" Hand Compaction Hammer, Finger Guard— H-1340GCompacts asphalt mixture in the compaction mold. Hammer has fingerguard at base of sliding weight. Flat circular face is 3-7/8" (98mm)dia.; hammer is 10 lb. (4.54kg.) sliding weight and has a free fall of 18"(457mm). Two compaction hammers are recommended.Shipping wt. 20 lbs. (9.0kg)Mold Holder for Hand Compaction— H-1343Holder mounts on compaction pedestal and centers thecompaction mold over the center of the post. Mold holder keepsmold, collar and base plate securely positioned during compaction.Shipping wt. 7 lbs. (3.2 kg)H-1340H-1340GPedestal for 4" Hand Compactor— H-1347Necessary to stabilize mold during compaction. Consists of8" x 8" x 18" (203 x 203 x 457mm) wooden post capped with12" x 12" x 1" (305 x 305 x 25mm) steel plate. Pedestal mountsto a concrete slab with four angle brackets at bottom of pedestal.Shipping wt. 90 lbs. (40.8kg)Adjustable Hammer Guide— H-1345.5Guide for hand compaction hammer.H-1345H-1345.5Hammer Support Rod— H-1345.6Support rod for hand compaction hammer.Marshall Mix Design and Testing Booklet— H-1328AWhile the new Superpave mix design system continues to evolve,many users worldwide continue to rely on the Marshall Method forhot asphalt mix design. This booklet covers the Marshall mix designcriteria; equipment necessary to perform the tests; sample preparationand testing procedures; data analysis, as well as moisture susceptibilitytesting methods.H-1347H-1345.6H-1328AH-1343141

Marshall Compression Machines1.800.544.7220 • www.humboldtmfg.comAsphaltMarshall Compression Machine— H-1339BMarshall Compression Machine, 220V 60Hz— H-1339B.2FMarshall Compression Machine, 220V 50Hz— H-1339B.5FCompression machine designed specifically for testing the resistanceto plastic flow of bituminous paving mixtures—the Marshall Test.Machine has a one-speed motor with reversing switch that producesa uniform vertical movement of 2" (51mm) per minute. Unit includesa H-4454.100 calibrated load ring and dial indicator for determiningtest load. Load capacity is 10,000 lbs. (45kN). Maximum piston travel is3-1/2" (88mm). Overall dimensions are: 18" x 18" x 38-1/2"H(457 x 457 x 978mm). Shipping wt. 185 lbs. (78.9 kg)Chart Recorder Accessory Kit— H-1329CKChart Recorder Accessory Kit, 220V 50Hz— H-1329CK.5FThis kit is comprised of a H-1329LR chart recorder, an LVDT and aH-2300.100 load cell for converting a H-1339B Marshall compressionmachine into an automatic Marshall compression tester and recorder.Includes LVDT sensor, electronic load cell and plotter assembly.Shipping wt. 18 lbs (8.2kg)Digital Accessory Kit, 110-250V 50-60Hz— H-1324A.3FTwin-channel digital display for use with the H-1339. Includes S-type10,000 lbf (45kN) load cell, 0.4" (10mm) linear strain transducer, andtransducer bracket. Display: 12" x 10" x 4" (304 x 254 x 102mm).H-1339BBasic Marshall Test Set— H-1335Basic Marshall Test Set, 230V, 60Hz— H-1335.2FBasic Marshall Test Set, 230V, 50Hz— H-1335.5FBasic Test Set for evaluating stability and plastic flow (Marshall Tests) ofbituminous paving mixtures. Includes all the basic testing equipmentfor performing these tests. Ideal setup for field lab applications, as wellas dedicated Marshall test labs. Included in the set are: (1) H-1339B—Marshall Compression Machine; (1) H-1340—4" Hand CompactionHammer; (2) H-1341—4" Marshall Compaction Molds; (1) H-1342—4" Marshall Breaking Head; (1) H-1343— Mold Holder for HandCompactor; (1) H-1344—Dial Flowmeter with Guide Sleeve (SpecifyH-1344M if you desire a metric Flowmeter); (1) H-1347—Pedestalfor 4" Hand Compactor; (1) H-1348—4" Mold Extractor, and(1) H-1390— Water Bath.H-1335Basic Marshall Test Set142

www.humboldtmfg.com • 1.800.544.7220Marshall Compression MachinesMarshall and TSR Compression Machine— H-1322Compression Machine, 220V 50Hz— H-1322.5FThe Humboldt H-1322, Marshall and TSR Compression Machine,is a state-of-the-art apparatus specifically designed for Marshalland TSR testing. These tests can be used to evaluate the relativequality of materials, as well as generate input for pavement designor pavement evaluation and analysis. The microprocessor-basedsystem incorporates a 16-bit Analog to Digital (A to D) converterwith chart recorder output and RS232 computer connectioncapabilities. The system automatically tests and records Marshallstability and plastic flow of Bituminous mixture on one chart withan accuracy to less than 1 percent over the total range, eliminatingoperator error in dial readings and manual recording of data.Meets ASTM D6927, D4123-82; AASHTO T245, T283, BS 598-107.Overall dimensions are: 36" x 18" x 38-1/2"H (914 x 457 x 978mm).Shipping wt. 250 lbs. (113.6 kg)AsphaltFeatures include:• The Marshall and TSR Compression Machine has a totalframe capacity of 10,000 lb (45kN).• Stress is measured with a supplied S-Type load cell.• The apparatus features an AC single-speed motor with anoperating rate of 2 in/min or (50.8mm/sec.), and a built-in ytchart recorder, for monitoring load vs. rate of compression.• The 16-bit Analog to Digital converter can be connecteddirectly to a computer or serial printer for live data monitoring.• The apparatus automatically detects the peak value, automaticallystops testing procedure upon completion and automaticallyactivates the chart recorder for a hard copy of the test data.• Maximum piston travel is 3-1/2" (88mm) with limit switch toprevent gearbox jams and damages.H-1322H-1322 Dual Range Chart Paper— H-1322CPChart paper with dual-range scale that allows switching between5000 and 10,000 lbf by using switch on H-1322 chart recorder.Package of 100 sheets.Marshall Setup using the HM-2800 Load FrameThe HM-2800 is a multi-use, multi-speed machine that providesa dedicated setting for Marshall testing in addition to its abilityto provide variable speeds of operation between 0.008 and 2.000inches/minute for doing the multitude of tests required by today’s labs.Pictured above is the HM-2800 Load Frame with a typical Marshallsetup. See the chart below for items to order for the setup shown.Typical Marshall Setup using HM-2800Part # Qty DescriptionHM-2800 1 Multi-Speed Load FrameH-4454.100 1 Load Ring, 10,000 (45kN)H-1344 1 Flow Meter Dial Gauge 1.000" x .0001"H-1342 1 Breaking HeadHM-2800Multi-Speed Load Frame— HM-2800Multi-Speed Load Frame, 220 50/60Hz— HM-2800.4FSee page 62 for more information on the HM-2800 Load Frame.143

Marshall Compression Machines1.800.544.7220 • www.humboldtmfg.comHM-3000 Marshall Testing SolutionThe HM-3000 provides the ultimate lab solution of a multi-purpose load framethat can handle Marshall and Hveem tests with built-in test parameters, aswell as soil tests such as CBR, UU, CU, CD and UC. The HM-3000 can work asa stand-alone unit, which can perform Marshall tests at the push of a button;or with the aid of Humboldt's HMTS software and a computer, be automatedto run tests and gather data in real-time data acquisition in the form of chartsand graphs. The HM-3000 is ideal for road construction projects in eithermobile or fixed labs, educational institutions and consulting firms.AsphaltMarshall Setup using the HM-3000.3F Load FramePictured is the HM-3000.3F Load frame with a typical Marshall setup. Seethe chart below for items to order for the setup shown. See page 60 formore information on the HM-3000.3F Load Frame.Typical Marshall Setup using HM-3000.3FPart # Qty DescriptionHM-3000.3F 1 Digital MasterLoader 110/220VHM-2300.100 1 S-Type Load Cell, 10,000 (50kN)HM-2310.10 1 Strain Transducer 1" (25mm)HM-4178BRT 1 Displacement Transducer BracketHM-3005SW 1 Marshall Reporting SoftwareHMTS Reporting Software, Marshall Module— HM-3005SWHumboldt Material Testing Software (HMTS) is a stand-alone application used inconjunction with Humboldt’s load frames, MiniLoggers, etc. to provide real-timedata acquisition. The Marshall Module provides a simple, test-specific interfaceto control Marshall test operations and automatically record data while alsodisplaying it in real-time tables and graphs. Technicians can be freed-up forother duties with the assurance that all test data is being collected and saved.• Test Information is stored, and all calculations are performed automatically• Live tests and live graphing capabilities (real-time)• Complete test report including all calculations and graphs required for testing• Review and export tests using Microsoft Excel• Smart Test Function: automatically picks up where it left off if the test was notfinished due to unexpected events within your computer.144

www.humboldtmfg.com • 1.800.544.7220Marshall Compression Accessories4" Marshall Breaking Head— H-13426" Marshall Breaking Head— H-1362Marshall Breaking Heads consist of an upper and lower cylindrical segment having aninside radius of curvature of 3" for a 6" samples and 2" for a 4" sample. The lowersegment is mounted on a base with two perpendicular guide rods extending verticallyfrom the base. One guide rod is larger than the other, with a correspondingly largerguide sleeve in the upper segment to ensure correct assembly. Guide sleeves in theupper segment bring the two sections together without appreciablebinding or loose motion on the guide rods. Meet ASTM D6927.H-1342 shipping wt. 20 lbs. (9.1kg), H-1362 shipping wt. 30 lbs. (13.65kg)H-1342H-13624" Lottman Breaking Head— H-13496" Lottman Breaking Head— H-1369Breaking heads for testing tensile strength. H-1349 has 1/2" wide upper and lowersegments for use on 4" samples. H-1369 has 3/4" wide upper and lower segments foruse on 6" samples. Meet ASTM D6931, AASHTO T283. Shipping wt. 10 lbs.AsphaltDial Flowmeter— H-1344Dial Flowmeter, metric— H-1344MConsists of a special dial indicator with a maximum position brake assembly and aguide sleeve that fits over either guide rod of a H-1342 or H-1362 stability test mold.H-1344 has a range of 1.00" with 0.01" divisions and the H-1344M has a range of25mm with 0.25mm divisions.Dial Gauge Replacement— H-1344.2Dial Gauge Replacement— H-1344.2MReplacement Dial Gauges for H-1344 and H-1344M Dial Flowmeters.Marshall Test Load Ring, 11,000 LBF (4,550kgF, 50kN)— H-4454.100Marshall Test Load Ring, 5,500 LBF (2,500kgF, 25kN)— H-4454.050Calibrated load rings with dial Gauges for use in Marshall testing are individuallyserial numbered for positive identification and comes with a calibration chart showingthe relationship between deflection and pounds force for the individual ring. Units arecalibrated in lbs. force every 20 lbs. from 0 to 1,000 lbs. and every 50 lbs. from 1,000to 11,000 lbs. with adequate deflection to interpolate to 10 lbs., in kg force and kN.Comes with 3/4" -16 female, threaded mount. Meet ASTM E74.Shipping wt. 8 lbs. (3.7kg).H-1349H-1369Digital Load Ring, 11,000 LBF (4,550kgF, 44.5kN)— H-4454.100DDigital Load Ring, 5,500 LBF (2,500kgF, 25kN)— H-4454.050DIdentical to Load Rings above except they use digital indicators in place of thedial indicators.Load RingsLoad Rings for use in various other applications. Meet ASTM E74. Rings are individuallyserial numbered for positive identification and come with a calibration chart showingthe relationship between deflection and pounds force for the individual ring.Range and Measurement UnitsModellbf kN kgf Analog Digital110 0.5 50 H-4454.001 H-4454.001D220 1.0 100 H-4454.002 H-4454.002D550 2.5 250 H-4454.005 H-4454.005D1,100 5.0 500 H-4454.010 H-4454.010D2,200 10.0 1,000 H-4454.020 H-4454.020D5,500 25.0 2,500 H-4454.050 H-4454.050D11,000 50.0 5,000 H-4454.100 H-4454.100D22,000 100.0 10,000 H-4454.200 H-4454.200DH-1344.2H-4454.100DH-1344NOTE: ASTM recommends that load rings be recalibrated eachyear after they have been put into service.H-4454.100145

Water Baths1.800.544.7220 • www.humboldtmfg.comAsphaltH-1394H-1390Water Baths with Microprocessor-based Temperature ControlMicroprocessor-based temperature controller, controls temperature throughout range fromambient to 180°F (82°C), with accuracy of ±0.1% of input span. All models are fully-insulatedand models H-1390 and H-1394 include a magnetic circulator which assures constant watertemperature throughout bath. Model H-1392 does not have a magnetic circulator.• Auto-tuning is fast & effortless• Dual, digital display simultaneously shows setpoint and process temperature• Ramp-to-set point handles critical temperatureprocesses smoothly• Set point range limiting protects processand equipment• Percent power limit protects componentsfrom stress• Rapid cycling provides fast system response• Operator lockout guards against unwantedchanges• All exposed parts are stainless steel. Frontpanel is water and corrosion resistant.Deluxe Water Bath, 110V 60Hz— H-1390Deluxe Water Bath, 220V 50/60Hz— H-1390.4FMicroprocessor-based temperature control for precise temperaturecontrol throughout the range. Includes magnetic circulator,ensuring constant water temperature, and, a stainless steel shelf,which stands 2" (51mm) above the bottom of the unit for freecirculation of water above and below test samples. Volume is 7.76gallons (29.40L) and dimensions are: . ID: 19.5"W x 11.5"D x 8" H(495.3 x 292.1 x 203.2mm). Meets ASTM D1559.Shipping wt. 47 lbs. (21.4kg)Economy Water Bath, 110V 60Hz— H-1380Economy Water Bath, 220V 50/60Hz— H-1380.4FLow-cost alternative water bath for heating specimens holds eightstandard 4" stability molds. Supporting shelf above the bottomallows water circulation around specimens. Automatic thermostaticcontrol with a range of 150° to 500°F (65° to 160°C). ID 11-1/2 x19-1/2 x 5-1/2" (293 x 497 x 140mm) deep. H-1380.4F usesincluded step-down transformer for electric conversion.Large Deluxe Water Bath, 110V 60Hz— H-1394Large Deluxe Water Bath, 220V 50/60Hz— H-1394.4FSame as H-1390, except volume is: 14 gallons (53L) and dimensionsare 20" x 20" x 10" deep (508 x 508 x 254mm).Shipping wt. 74 lbs. (33.5kg)Water Bath, 110V 60Hz— H-1392Water Bath, 220V 50/60Hz— H-1392.4FSame as H-1390, except it does not have a magnetic circulator.Shipping wt. 74 lbs. (33.5kg)H-1380146

www.humboldtmfg.com • 1.800.544.7220Asphalt Mixers/Accessories12-Qt. Laboratory Bench Mixer— H-3842ABench Mixer, 230V 50/60Hz— H-3842A.4FThe Hobart Model HL-120 bowl has a 12-qt. (0.401 cu. ft.) mixingcapacity and a 15-minute motor-driven timer. Planetary actionof the beater assures thorough blending and mixing. Selectiveagitator transmission has 3 speed settings: 106, 196 and 358 RPM.Includes stainless-steel bowl, flat-type aluminum grid beater andaluminum dough hook. Base dimension: 14-3/4" x 20" x 29-9/16"(375 x 508 x 750cm). Shipping wt. 185 lbs. (83.9 kg)H-3842A—12-Qt. Mixer Replacement PartsDescriptionAluminum Beater12-Qt. Stainless Steel BowlAluminum Dough HookStainless Steel Wire Loop WhipModelH-3842A.1H-3842A.2H-3842ADHH-3842AWW20-Qt. Laboratory Bench Mixer— H-3843ABench Mixer, 230V 50/60Hz— H-3843A.4FWith a 20-qt. capacity (0.6684 cu. ft.) bowl, the Hobart HL-200mixer has a positive gear drive and planetary mixing action todeliver positive results. Selective agitator transmission has 3 speedsettings: 107, 198 and 361 RPM. Exclusive stirring switch provideslow (53RPM) speed to facilitate adding liquids to semi-solids.Includes stainless-steel bowl and flat-type aluminum grid beater.Base dimension: 21" x 21-1/2" x 41-1/4" (533 x 546 x 1048cm).Shipping wt. 226 lbs. (102kg)H-3843AH-3842HWH-3843HWH-3842AExtreme-duty Whisks and parts for previousmodels, H-3842 (Hobart A-120) and H-3843(Hobart A-200) are available, please call.AsphaltH-3843A—20-Qt. Mixer Replacement PartsDescriptionAluminum Beater20-Qt. Stainless Steel BowlAluminum Dough HookStainless Steel Wire Loop WhipModelH-3843A.1H-3843.2H-3843DHH-3843WWHumboldt Extreme-Duty 12 Qt. Whisk— H-3842HWHumboldt Extreme-Duty 20 Qt. Whisk— H-3843HWCustom, hand-made extreme duty whisks are formed from 1/4"dia. stainless steel rod. Designed to stand up to the abuse ofmixing heavy aggregate asphalt mixes in the Mixers listed above.Asphalt/Concrete Mixer, 5 gal., Stationary— H-1690Ideal for sample batch mixing in either laboratory or field.Separate utility bucket cradles securely inside enameled-steelmixer frame. Maximum capacity 70 lbs (50lb recommended).Built for continuous duty performance. Choice of 4 Mixing angles.Mix bucket speed is 60 rpm with 1/4 HP motor. Includes bucket,chain guard and R-paddle. Shipping wt. 45 lb (20kg).H-1691H-1690 Asphalt/Concrete Mixer AccessoriesDescriptionMixing Paddle for 5 gal. H-1690 MixerDeluxe Mixing Paddle for 5 gal. H-1690 MixerBucket & Cover for 5 gal. H-1690 MixerH-1690ModelH-1690.2H-1690.3H-1690.1Asphalt/Concrete Mixer, 5 gal., Portable— H-16915 gallon, portable mixer with 8-inch semi-pneumatic wheelsfor mobility. Mix bucket speed is 60 rpm with 1/4 HP motor.Includes mix bucket only, order desired paddles separately.Shipping wt. 81 lb (37kg).Asphalt/Concrete Mixer, 10 gal., Portable— H-169210 gal. version of H-1691. Includes mix bucket only, orderdesired paddles separately.H-1691, H-1692 Asphalt/Concrete Mixer AccessoriesDescriptionModelAsphalt Paddle for 5 gal. Portable Mixer H-1691.6Asphalt Paddle for 10 gal. Portable Mixer H-1692.6Concrete Paddle for 5 gal. Portable Mixer H-1691.8Concrete Paddle for 10 gal. Portable Mixer H-1692.9Mix Bucket for 5 gal. Portable MixerH-1691.4Mix Bucket for 10 gal. Portable MixerH-1692.5147

Specific Gravity—Rice Test1.800.544.7220 • www.humboldtmfg.comRice Test SetupAsphaltTypical Rice Test StetupVacuum Pycnometer (Rice Test) Set— H-1750Used in Rice testing to determine the maximum specific gravity ofbituminous paving mixtures with maximum aggregate size up to19.1mm (3/4in.). 2000g capacity, 7-1/2" ID x 6" depth. Set includesaluminum volumetric canister; volumetric lid; flat, Plexiglas vacuumlid with O-ring; volumeter; vacuum gauge with release valve andfittings (dial reading 0 to 30"), and a metal water vacuum aspiratorwith 3/8" IPT and 6' hose. Unit achieves vacuum using an aspirator oroptional vacuum pump. Use with H-1756 vibrating table, andH-1754D manometer, sold separately. See page 150 for vacuumpumps. Replacement parts are available, please inquire.Meets ASTM D2041; AASHTO T209, T283.H-1820H-1820H-1750Aluminum Lid— H-1750.2Replacement lid for models H-1750 and H-1751.O-Ring— H-1750.3Replacement o-ring for models H-1750 and H-1751.Stainless Steel, Vacuum Pycnometer Set— H-1750SSSame as H-1750 except stainless steel vessel.Small Vacuum Pycnometer Set— H-1751Same as H-1750 except 1500g capacity, 7-1/2" ID x 4" depth.Large-Capacity Vacuum Pycnometer Set— H-1820Large-capacity unit, 10L (2.64 gal.), 6000g (13.2 lbs.) sample weight,with maximum aggregate size of 50mm (2in.). Set features domedtransparent cover for easy observation of sample testing, perforatedplastic shelf, which some States require; water inlet valve and 1/4"ID hose, quick-disconnect, vacuum gauge, vacuum hose andaspirator with 3/8" NPT fitting. Flange OD is 10-3/4" (273mm);maximum clearance above plate is 7-3/4" (197mm). Use withH-1826A vibrating table, and H-1754D manometer, sold separately.See page 150 for vacuum pumps. Replacement parts areavailable, please inquire. Dimensions: 9-7/16" ID x 12-1/8"(240 ID x 311mm). Meets AASHTO T209, T283.H-1754DDigital Manometer— H-1754DDigital Manometer, Certified— H-1754DCAA precise measurement device designed to replace mercury-filledmanometers used in Rice test applications. This portable, hand-helddevice can be easily moved around the laboratory. Holes areprovided for bench or wall mounting and a 3/8" barb fitting isused for quick connections. The instrument features a digital displayrange of 0 to 1000mm Hg (absolute) at a resolution of 0.1mm Hg.The device has a rated accuracy of +/-0.5% full scale and is poweredby one 9V battery.Slow Release Valve for Vacuum Pycnometers— H-1749For use with H-1750, H-1751 and H-1820 for greater accuracy andshorter dry back time. Brass valve maintains 30mm vacuum pressureon sample. Meets ASTM D2041, AASHTO T283.H-1749148

www.humboldtmfg.com • 1.800.544.7220Specific Gravity—Rice TestOrbital De-Airing Table for H-1750 Pycnometer— H-1782The Humboldt Orbital De-Airing Table is designed for use inmaximum specific gravity and density determinations of bituminouspaving mixtures. Through the use of an orbital shaking action,material densification that entraps air is virtually eliminated,resulting in more accurate and uniform test results. The front panelincorporates a variable speed controller with a range of 10 to 250 rpmand an LED programmable timer with an accuracy of better than ±0.1%.The orbital diameter of the 11" x 12" (279 x 305mm) table is set at1-1/2" (38.1mm). Taking up little counter space, the base is 10" x 10"(154 x 154mm) and has an overall height of 16" (406mm). Quickrelease clamps are used to permit quick mounting and removal of thepycnometer. The optional H-1753 Flask Attachment allows the userto conduct tests using a laboratory flask. Shipping wt. 28lbs (13kg)Note: For 220V operation, order Model H-1042 Transformer.H-1782AsphaltVibrating Table for H-1750 Pycnometer— H-1756AVibrating Table for Pycnometer, 220V 50Hz— H-1756A.5FHeavy-duty vibrating tables keep sample material loose for morereliable test results. Strong, rugged-duty vibrators and sturdy baseshaving integral, heavy-duty on/off switches. Exclusive quick-releasecam/lock fasteners allow quick placement and removal of canister.Vibrating Table for H-1820— H-1826AVibrating Table for H-1820, 220V 50Hz— H-1826.5FHeavy-duty vibrating tables keep sample material loose for morereliable test results. Strong, rugged-duty vibrators and sturdy baseshaving integral, heavy-duty on/off switches. Exclusive quick-releasecam/lock fasteners allow quick placement and removal of canister.The open-end model has a sliding scale and is graduated aboveand below zero to 130 x 1mm. Shipping wt. 12lbs (5.4kg)Flask Attachment— H-1753For use with H-1756A and H-1782, flask not included.Universal Timer— H-4296Universal Timer, 220V 60Hz— H-4296.4FPortable timer automatically shuts off electrical apparatus at settime up to 60 minutes. Features two receptacles and 3-wire cordand plug.Indicating Drierite Air Drying Unit— H-1759Easily installs in-line between vacuum pump and rice test equipment.This refillable unit measures 2-5/8" by 11-3/8" (667 x 289mm) withhose barbs at both ends, which can accept 1/4" to 3/8" flexibletubing. Supplied complete with 650g of indicating desiccant.Drierite Desiccant— H-1757For use while performing Rice test. Protects vacuum pump byremoving final trace of moisture. Must be used with H-1758 IndicatingDrierite. Meets ASTM D2041.Indicating Drierite Desiccant— H-1758For use with H-1757 Drierite desiccant in performing Rice test.Blue desiccant turns red to show absorption and may be reused.H-1756AH-1753 shown inuse with H-1782H-1826AH-4296H-1757Vacuum Pumps Available on Page 150H-1759H-1758149

Vacuum Pumps1.800.544.7220 • www.humboldtmfg.comAsphaltH-1763AH-1764High Vacuum Pump— H-1763AHigh Vacuum Pump, 230V 50/60Hz— H-1763A.4FDirect-drive two-stage rotary sliding vane high vacuum pump featuresgas ballast and trap to reduce risk of oil being sucked into the system.Produces free air displacement 85L per minute (3 cu. ft. per minute) andmaximum vacuum 29-30". Operating temperature is 30 to 170°F(-1.11 to 76.6°C). Has 1/4" OD intake ports for 1/4" ID tubing.Dimensions: 11-1/4" x 15-1/2" x 6-1/2" (28.6 x 39.4 x 16.5cm).Shipping wt. 26 lbs (13kg)Two-Stage Vacuum Pump— H-1764Two-Stage Vacuum Pump, 230 60Hz— H-1764.2FTwo-Stage Vacuum Pump, 230 50Hz— H-1764.5FDesigned for continuous use, this two-stage, belt-driven pumpoperates on the oil-sealed rotary vane principle and is ideal fordistillation, filtration, degassing and as a roughing pump forhigh-vacuum systems. Pumps are mounted on rectangular steel baseplate and include V-belt and belt guard that totally encloses belt andpulleys. Pump pulls 29-30" maximum vacuum. Includes initial supplyof oil plus an extra quart of HyVac ® oil. Shipping wt. 80 lbs (36kg)H-1762H-1770Two-Stage Vacuum Pump w/Gas Ballast— H-1765Vacuum Pump w/Gas Ballast, 230 50Hz— H-1765.5FSame as H-1764 but with gas ballast that consists of an adjustable valveto permit controllable proportion of air to be bled into exhaust stagefor rapid purging of entrained water vapor in pump oil. For maximumvacuum, this can be operated totally closed. Pump pulls 29-30"maximum vacuum. Shipping wt. 110 lbs (50kg)Vacuum Pump— H-1770High-vacuum, small capacity, general-purpose vacuum pump with beltguard has two-stage construction for efficiency with low maintenance.Features metal vanes and vented exhaust for introduction of air toremove condensable vapors. Pump is filled with oil; an extra quart isincluded. Exhaust filter is available separately. Guaranteed ultimatevacuum is 25-29" (635-736mm) mercury, and free-air displacement is25L/min. (0.9cfm).Two-Stage Oil-less Vacuum Pump— H-1762Two-Stage Oil-less Vacuum Pump, 230 50Hz— H-1762.5FSplit-capacitor four-pole, two-stage oil-less diaphragm vacuum pumppulls 29" Hg maximum-obtainable vacuum.Shipping wt. 25 lbs (11.36kg)Vacuum Pump OilHigh purity oil with low vapor pressure that does not materially increaseat temperatures up to 50°C (122°F) and viscosity sufficiently low for useat 125°C (59°F). Oil remains fairly constant up to 50°C (122°F).Vacuum Pump Oil, 1 Quart— H-1766.2Vacuum Pump Oil, 1 Gallon— H-1766.3Vacuum Pump Oil, 5 Gallon— H-1766.4Vacuum Pump Oil, 12 Quart Case— H-1766.5Vacuum Pump Oil, 6 Gallon Case— H-1766.6H-1766.2H-1766.3H-1768.3Flushing Oil for Vacuum Pumps— H-1768.3Purges contaminants and condensables, such as water & solvents fromall mechanical vacuum pumps. Use between oil changes minimizescontamination of new oil by residue from old oil; extends pump life.Shipping wt. 9 lbs (4.1kg).150

www.humboldtmfg.com • 1.800.544.7220Binder Content/Ignition FurnaceQuarterMaster Hot Asphalt Mix Sample Splitter— H-4122The QuarterMaster is ideal for dividing the larger asphalt mix samplesrequired in Superpave specifications. The hopper accepts samples up to 120 lb(54kg) of any mix with aggregate between 9.5 to 37.5mm and quarters it intofour equal parts. In operation, a simple throw of a lever divides the sample.Using the device ensures greater control, consistency and uniformity in thepreparation of test samples. The unit is supplied complete with four samplebuckets. Dimensions are 14"W x 17"D x 48"H (356 x 432 x 1219mm). To assistoperation, order a H-1702 materials handling scoop. Shipping wt. 84 lb (38kg)QuarterMaster Quick Funnel Insert— H-4122QFQuarterMaster Replacement Bucket— H-3372Asphalt Permeameter, 4"— HM-9110Asphalt Permeameter, 6"— HM-9111These asphalt permeameters are compact, self-contained, easy-to-use units, whichcan be used in the lab or in the field. They are used to test the permeability of acompacted asphalt paving mixture by using the falling head method to determinehydraulic conductivity of saturated 4" or 6" samples. To use, place the specimen insidethe metal cylinder, where it is held in place by a latex. The unit is then pressurized bythe built in hand pump. The expanding membrane pushes against the outer edge ofthe sample, filling in voids and preventing flow down the side of the core. The sampleis then saturated from the bottom, and 500cc of water is allowed to flow through thesample while being timed. Both permeameters include a 500cc manometer with 15 ftof 1/4" OD water line, built-in hand pump and a pressure gauge.H-4122H-4122QFAsphalt4" Membranes— HM-9110.2 4" O-rings— HM-9110.16" Membranes— HM-9111.2 6" O-rings— HM-9111.1Asphalt Content/Binder Ignition Furnace— F85930The Asphalt Content/Binder Furnace with internal automatic balance is an environmentally-friendlyand cost-effective method for the accurate determination of asphaltcontent. Developed by NCAT, the National Center for Asphalt Technology. Furnace‘slarge capacity handles samples up to 4,000 grams. Ignition method reduces testingtime compared to solvent testing methods and automatic operation frees techniciansfor other tasks. Temperature range is: 392 to 1202°F (200 to 650°C). Accurate internalbalance monitors weights automatically throughout ignition to within ±0.1 gram. Easyoperation— simply enter sample weight, calibration factor, load the sample, and pushstart, when unit beeps at test end, push stop, and sign receipt. Door safety features,such as a software-activated door lock, an automatic interlock that cuts power whendoor is open, full 180 degree door opening and door hinge lock eliminate harmfulsolvents and make operation easy.Chamber dimensions: 14"W x 10.5"H x 14"D (355 x 266 x 355mm).Overall dimensions: 21.75"W x 36.75"H x 25.75"D (552 x 933 x 654mm).240V 60Hz, 20 amp, 4,800 watt operation. Shipping wt. 290 lb (131.6kg)Asphalt Content/Binder Ignition Furnace— F85938Same as above except 208V 60Hz, 23 amp, 4,800 watt operation.Accessory Package for Ignition Furnaces— AY1087X1Accessory package includes: 4 baskets, 2 trays, 2 covers, handle,cooling cage, insulated plate, gloves, face shield, 4 rolls of printertape, balance calibration plate and anderol oil.HM-9110HM-9111F85930 & F85938 Replacement PartsDescriptionModelExhaust Tubing (per foot) H-1515Exhaust Tubing, Stainless Steel (per foot)Printer PaperH-1515SSPRX2Rhoma-Sol Specialty Emulsifier— H-1304Spray-on solution used to remove bituminous deposits and stains from testequipment, contains no hazardous petroleum solvents and is 100% biodegradable.F85930F85938H-1304151

SHRP Gyratory Compactor1.800.544.7220 • www.humboldtmfg.comAsphaltSHRP Gyratory Compactor— H-1610SHRP Gyratory Compactor, 220V 60Hz— H-1610.2FSHRP Gyratory Compactor, 220V 50Hz— H-1610.5FThe SHRP Gyratory Compactor is designed for use in Superpave asphaltmix design. The system has undergone complete testing and is approvedby the South Central Superpave Center. Test results were comparable aperfect 12 out of 12 times. Weighing only 550 lbs (249kg), the system isideally suited for both laboratory and field jobsite applications. The unitis supplied complete with one 150mm mold and PC with calibrationequipment and software. Meets ASTM D6925 and all AASHTO and FHWAspecifications.Features include:• Supplied complete with PC, calibration equipment and software.• Completely enclosed compaction chamber• Continuous height measurement of specimen during testing towithin +/-0.1mm• Built-in power assisted specimen extractor• Real-time display of test data• User-friendly software programs for editing test data acquisitionand analysis• See-through door with safety switch and illuminated test chamber• Interchangeable 100mm and 150mm moldsH-1610Specifications:• Consolidation pressure 200 to 1,000 kPa• Consolidation ram travel adjustable, factory set at 10mm/second• Angle of gyration adjustable from 0.5° to 2.0° +/-0.02°(factory set at 1.25°)• Rate of gyration 30.0 rpm +/-0.5 rpm, constant• Automated shutoff for preset specimen height, Nmax or numberof gyrations• Mold height 250mm• Mold wall thickness 9.5mm minimum• RS232 communications port• Dimensions 21.15"W x 28"D x 63"H (537 x 711 x 1600mm)excluding PC• Weight 550 lb (249kg)SHRP Gyratory AccessoriesDescriptionModelPiston Face Conversion Kit for 100mm Samples H-1612Mold Assembly, 100mm H-1614Mold Bottom, 100mmH-1614BFilter Paper, 100mm, Pkg. of 1000H-1341PMold Assembly, 150mm H-1616Mold Bottom, 150mmH-1616BFilter Paper, 150mm, Pkg. of 1000H-1361PCalibration Kit, includes: indicator, mounting brackets and gauge blocks H-1620Material Handling Chute H-1702152

www.humboldtmfg.com • 1.800.544.7220SHRP EquipmentPressure Aging Vessel— H-1640Pressure Aging Vessel, 230V 50/60Hz— H-1640.4FThe Pressure Aging Vessel (PAV) is used to simulate in serviceoxidative aging of asphalt binder according to proceduresdeveloped by the Strategic Highway Research Program(SHRP). The H-1640 is fully compliant with the most recentASTM and AASHTO standards for these tests. (Refer to ASTMdesignation D6521-05 and AASHTO method R28-06). Thecomplete PAV system consists of an ASME-code stainless steelpressure vessel in a stainless steel cabinet with encased bandheaters, a precision sample holder for simultaneous testing often specimens, a set of ten TFOT specimen trays, a pressurecontroller, temperature controller, pressure and temperaturemeasurement devices, temperature recorder, and a specimenloading and unloading tool.AsphaltThe H-1640 PAV takes the hassle out of running anddocumenting asphalt binder aging operations. Three easy,non-complicated steps produce accurate and reliable results.Just press the “heat” button, inset specimens when promptedand press the “Age” button and let the PAV do the rest.Custom status screens guide the user step-by-step throughthe entire process. Each display screen (preheat start-up,preheat ready, aging heat up, aging pressurized, and agingcomplete) is simple and direct, with detailed process andstatus information. The final output screen, when the testis complete, shows the current vessel pressure, as well asminimum and maximum temperatures achieved during thetest procedure. Process data (temperature and pressure) iscontinually stored at regular intervals in the programmablelogic controller (PLC) that controls and monitors the process.The H-1640 PAV features a compact, benchtop design withintegral pressure vessel. Its rotating vessel lid with roundedsupport block provides easy opening and closing.A built-in timer accumulates and records out-of-range time(out-of-range time for the PAV is typically less than 10minutes during a 20-hour test) Minimum and maximumtemperature data is recorded and displayed at the end ofeach test.Optional remote control operation and data access is alsoavailable, please contact Humboldt. This new control setuphas many exciting prospects, including improved productivityand tighter process control, with the ability to control testingand to access data from a single remote location. With theappropriate hardware, a single user is able to initiate or cancela test, monitor test progress, and view test results on anynumber of PAVs located anywhere in the world.SpecificationsOperating PressureTemperature RangeTemperature Control ResolutionTest Temperature UniformityTime to SetpointReturn to SetpointPressure VesselMaximum PressurePressure Safety Release2.10 ±0.05 MPa (304 psi)90°C to 110°C (194°F to 230°F)±0.1°C±0.5°C3 hours from ambient120 min. after preheating andloading of specimensASME code section VIII, division1; 1992 A 93325 psi (2.24 MPa) at 120°C(250°F)325 psi (2.24 MPa)H-1640PAV Verification Kit— H-1641.2Provides NIST-traceable temperature and pressure verification andincludes a calibration block. Temperature range is -201 to 1210°C with a± 0.03°C accuracy. Pressure range is 0 to 500 psi with an accuracy of ±0.25% full scale (ANSI/ASME B40.1 Grade 4A)PAV O-Ring— H-1641.3Single-stage air pressure regulator (for external use on air tank)• 0-4,000 psi high pressure gauge.• 0-600 psi low pressure gauge includes relief valve.UPS Battery Backup System— H-1641.1Prevents power failures, sags, surges, under and over voltages.Includes extended battery module EDM, and provides 4 hoursof backup at full load. Provides three-stage charging, doublingbattery life and optimizing recharge times. Provides 60-dayadvanced notification of end of useful battery life. PowerRequirements: 230 VAC, 1 Ph. 60 Hz.CGA Adapter— H-1641.4For use with bottles with 346 CGA connectionHigh Pressure Hose— H-1641.56 ft. stainless steel braided sheath pressure hose.Includes fittings and quick connect coupling.Specimen Pans Set— H-1641.6Set of 10 AASHTO T179 pans reduces down time between aging samples.155

SHRP Equipment1.800.544.7220 • www.humboldtmfg.comAsphalt156Pressure Aging Vessel— H-1630Pressure Aging Vessel, 220-250V 50/60 Hz— H-1630.4FThe H-1630 pressure aging vessel (PAV), provides a test methodfor simulating in-service oxidative aging of asphalt binders inaccordance to procedures developed by the StrategicHighway Research Program (SHRP) The H-1630 meets ASTMD6521 and AASHTO R28 requirements and consists of a stainlesssteel pressure vessel with encased band heaters and integralpressure and temperature controls, providing a completelyautomated system with push-button operation. The system'scontroller, which can be remotely mounted, automaticallypressurizes the PAV vessel and prompts when the unit is primedand ready for use. It also stores temperature and pressure data forlater evaluation. The PAV's compact benchtop design allows it tofit into even the smallest of labs; and, it comes complete with allitems necessary for operation, including an air pressure regulator.The H-1630 PAV system is furnished with: a calibrated pressurerelief valve, a spare o-ring gasket, a 2-piece removable insulationcover, (10) stainless TFOT pans, a rack for the TFOT sample pans,a handle for the TFOT pan rack, a IEC 340-type, 120 volt powercord, an air supply hose with pressure regulator, in-line filter andquick-disconnect fitting, the system controller (with 1 power and2 data cables, an air exhaust muffler, and an air exhaust pipe-awayadapter. The H-1630 also comes with a back-up power supply,calibration instruments, and other instruments necessary formaintenance.TFOT Stainless Steel Pans, 10 Pack— H-1630.2The vacuum oven temperature and pressure must be certifiedCalibration Kit— H-1630.3Kit contains all items required to perform these certifications.Instruments are furnished with current certification at PAV agingpoints, and N.I.S.T.-traceable data sheets with certificationperformed by an ISO-9002 certified laboratory.Vacuum Degassing Oven— H-1632Pressure Aging Vessel, 230V 50/60 Hz— H-1632.5FThe Vacuum Degassing Oven (VDO) is used to degas pressure-agedbinder samples to meet AASHTO R28-06 and ASTM D6521-05standards. The H-1632 vacuum degassing oven (VDO) is a compact,tabletop design that provides push-button automation of thedegassing process. The simple control panel has only three buttonsto control the process: Preheat, Start Process and Stop; and, anend-of-cycle alarm lets you know when testing is complete.The VDO is made from durable stainless steel and features afully-integrated, vacuum source, which is air-powered. It uses aventuri driven by a laboratory compressed air supply capable ofproviding compressed air at 6.5 bar pressure or more. A flow rateof approximately 55 liters/minute is required for 30 minutes. The airmust be filtered and dried— the venturi produces a chilling effect,and moisture can freeze, expand, and damage the venturi unit. TheH-1632A is almost totally silent when producing vacuum and hasno moving parts to wear out or break, other than an air flow controlsolenoid valve.The H-1632A Vacuum Degassing Oven is furnished with: (4) 250 ml(8oz) sample tins, (2) O-ring gaskets, AC power cord – IEC 340 Type,Stainless steel lid with 5-1/2” diameter heat-resistant glass viewingport and metering valve for vacuum adjustment, Quick-disconnectcoupling for user’s air supply and an air line filter-dryer for installationin supply line.Calibration Kit— H-1634The vacuum oven temperature and pressure must be certifiedevery 6 months. Instruments are furnished with current certification atPAV aging points, and N.I.S.T.-traceable data sheets with certificationperformed by an ISO-9002-certified laboratory.

www.humboldtmfg.com • 1.800.544.7220Saybolt ViscometerComponentsDescriptionModelOrificesStainless steel universal orifice only H-2173Stainless steel Furol orifice only H-2174Tubes with OrificesBrass Sayboldt viscometer tube w/ stainless steeluniversal orificeBrass with stainless steel Furol orificeSayboldt viscosity tubeStainless steel with stainless steel Furol orificeSayboldt viscosity tube, includes wrenchBrass with stainless steel universal and Furol orificeSayboldt viscosity tube, includes wrenchH-2180H-2182H-2183H-2184Stainless steel with stainless steel universal andFurol orifice Sayboldt viscosity tuber, includes wrenchH-2185TubesStainless steel Sayboldt viscometer tube H-2171Brass Sayboldt viscometer tube H-2172AsphaltAccessoriesDescriptionModelTube cleaner H-2175Seyboldt viscosity flask, graduated 60mlvolumetric receiving flaskH-2176Seyboldt withdrawal pipette and aspirator H-2177White mineral oil, suitable for use up to 230°F (110°C) H-2189Strainer H-2178High-temp. Dow-Corning 200 Fluid,100 centistroke oil, 5 gallon (wt.40lb (18kg)H-2199Displacement ring H-2194Thermometer support H-2195Orifice wrench H-2196Tube wrench H-2197Sayboldt viscosity thermometer (66 to 80°F)H-2600.17FSayboldt viscosity thermometer (94 to 108°F)H-2600.18FSayboldt viscosity thermometer (120 to 134°F)H-2600.19FSayboldt viscosity thermometer (134 to 148°F)H-2600.20FSayboldt viscosity thermometer (174 to 188°F)H-2600.21FSayboldt viscosity thermometer (204 to 218°F)H-2600.22FSayboldt viscosity thermometer (19 to 27°C)H-2600.17CSayboldt viscosity thermometer (34 to 42°C)H-2600.18CSayboldt viscosity thermometer (49 to 57°C)H-2600.19CSayboldt viscosity thermometer (57 to 65°C)H-2600.20CSayboldt viscosity thermometer (79 to 87°C)H-2600.21CSayboldt viscosity thermometer (95 to 103°C)H-2600.22CH-2165Saybolt Viscometer Bath— H-2165Saybolt Viscometer Bath, 220V 50/60Hz— H-2165.4FDesigned for Saybolt Universal and Furol viscosity testing,this constant temperature bath meets all ASTM and AASHTOrequirements for precise temperature control. The microprocessorPID circuitry assures accurate temperature controlwithin ASTM tolerances throughout the range of ambient to464°F (240°C).Simple push-button controls and dual digital displays are usedfor easy setting and monitoring of the baths temperature. Witha capacity of four viscometers and 60ml receiving flasks, thebath features sliding draft shields, chemical-resistant alignmentplates for handling of flasks and a glare-free fluorescentbacklight for easy viewing of test sample. The insulated bathinterior is constructed entirely of heavy-gage stainless steel andthe built-in overflow pipe and drain valve simplifies filling thebath oil to the required level.A chemical resistant top plate provides insulation and is easilyremoved to allow for cleaning of the bath interior. The bath issupplied complete with four thermometer supports, four portcovers, four chained corks, two port closures, tube nut wrench,orifice wrench, withdrawal tube and oil strainer. Viscometertubes, orifices, receiving flasks, oil and thermometers are notincluded and must be ordered separately. Meets ASTM D88,D244, E102, AASHTO T72. Shipping wt. 58 lbs. (26.3kg)157

Viscosity1.800.544.7220 • www.humboldtmfg.comAsphaltH-1745H-1720H-1730Constant Temperature Bath— H-1720Constant Temperature Bath, 220V 50/60-Hz— H-1720.4F(Cannon Model CT-500)• Temperature range: ±20°C to 100°C (±0.01°C)• Quick-set dial for commonly used temperatures• Variable setting to any temperature within the operating rangeState-of-the-art, yet relatively inexpensive. Precision viscositydetermination with glass capillary viscometers. Quick-set dial selectstemperatures of 20, 25, 30, 40, 50, 60, 70, 80, 90, and 100°C. Twostainless steel encased thermisters and solid-state circuitry ensureaccurate temperature control, plus over-temperature and liquidlevel protection. All wetted parts are stainless steel or glass. Frameis heavy aluminum, epoxy coated. Bath chamber is 17L Pyrex glassvessel. 16"W x 14-1/4"D x 24"H (407 x 362 x 610mm). Capacity 4.5gal. (17L).Vacuum Manifold— H-1745Canon Model 3VM for use with H-1720UBF Bath Oil— H-1732For use with H-1720 with temperatures below 121°C, 6 gallon.Storage Unit— H-1722For use with H-1720 or H-1730 Constant Temperature WaterBaths above. Sturdy two-drawer unit elevates either modelConstant Temperature Bath for ease of viewing, plus amplestorage of viscometers and accessories.18"W x 18"D x 6.5"H (457 x 457 x 165mm).Constant Temperature Bath— H-1730Constant Temperature Bath, 220V 50/60Hz— H-1730.4F(Cannon Model CT-1000)• Temperature range: ±20°C to 150°C (±0.01°C)(Above 100°C temperature is controlled to 0.03°C)• Quick-set dial for commonly used temperatures. Variablesetting to any temperature within the operating range• Radiant internal lighting provides improved viewing clarity• Enclosed bath housing for rapid heat-up/greater safetyState-of-the-art, with higher temperature limit, plus addedfeatures over the CT-500, yet still relatively inexpensive. Precisionviscosity determination with glass capillary viscometers. Quick-setdial selects temperatures of 20, 25, 30, 40, 50, 60, 70, 80, 90,100, 135, and 150°C. Two stainless steel encased thermistersand solid-state circuitry ensure accurate temperature control, plusover-temperature and liquid level protection. All wetted parts arestainless steel or glass. Frame is heavy aluminum, epoxy coated.Bath chamber is 17L Pyrex glass vessel.17-1/4"W x 18-1/4"D x 23"H (438 x 464 x 584mm).Capacity 4.5 gal. (17L). Meets ASTM D445.Vacuum Manifold— H-1735Canon Model 4VM for use with H-1730High-Temperature Bath Silicone— H-1733For use with H-1730 with temperatures above 135°C, 1/2 gallon.158

www.humboldtmfg.com • 1.800.544.7220ViscosityH-1741HDigital Vacuum Pressure Regulators,(Solid-State, Use no Mercury)Horizontal— H-1741HHorizontal, 220V 50/60 Hz— H-1741H.4FVertical— H-1741VVertical, 220V 50/60 Hz— H-1741V.4F(Cannon DVR-1000 Series)For precise measurement and control of vacuum at 300mm Hgbelow atmospheric pressure. Use with Cannon-Manning,Asphalt Institute, or Modified Koppers vacuum viscometersfor measurement of asphalt cement and in other laboratoryapplications where accurate measurement and control ofvacuum is required.In normal mode, the amount of vacuum in mm Hg is displayedon the LCD screen. Or, user may select from nine other unitsof measurement via a membrane touchpad. Internal set pointsare preset to regulate vacuum at 300 +/0.5mm Hg belowatmospheric pressure. Set points may be altered to fit user‘sspecific needs within the operating range of 1 to 410mm Hgbelow atmospheric pressure.Reading accuracy: ±0.05% of reading ± the least significant digit(includes combined effects of linearity, repeatability, hysteresis,and temperature). NIST certification is supplied. Vacuum regulationaccuracy: ±0.5mm HG. Operating temperature: 0 to 40°C (32 to104°F). Upper/lower safety limit: 746mm HG below atmosphericpressure. Choice of horizontal: 18.5"w x 18"d x 6.75"h (470 x 457 x171mm) or vertical: 6.75"w x 18"d x 18.5"h (171 x 457 x 470mm).NOTE: Prices and delivery on Cannon-Manning,Cannon-Fenske, Lantz-Zeitfuchs, Modified Koppersand other viscometers are available upon request.H-1741VZeitfuchs® Cross-Arm Viscometer and HolderThese models are used to determine kinematic viscosity of liquidasphalts, road oils and distillation residues of liquid asphalts at140°F (60°C) and of asphalt cements at 275°F (135°C), requiringa charge of only 1 to 3ml can easily be filled and cleaned whileimmersed in a temperature bath and need not be removed.Requires a liquid depth of 9" (229mm). Includes round metal holderfor 2" (51mm) dia. hole and certificate of calibration. Meets ASTMD2170; AASHTO T201.Seitfuchs ® Cross-Arm Viscometer and HolderApproximateConstant Range of Centistokes ModelCs/Sec.0.003 0.6 to 3 H-1746.10.01 2 to 10 H-1746.20.03 6 to 30 H-1746.30.1 20 to 100 H-1746.40.3 60 to 300 H-1746.51.0 200 to 1,000 H-1746.63.0 600 to 3,000 H-1746.710 2,000 to 10,000 H-1746.830 6,000 to 30,000 H-1746.9100 20,000 to 100,000 H-1746.10Asphalt Institute Vacuum ViscometerDesigned for highly viscous materials, such as asphalt cement,viscometer contains a graduated capillary instead of timing bulbs.Requires 7" (178mm) bath depth and 3ml sample size. IncludesAsphalt Institute Vacuum ViscometerViscometerSize/No.H-1746.7Viscosity Range(Poise)H-1747.1Model25 42 to 800 H-1747.150 180 to 3,200 H-1747.2100 600 to 12,800 H-1747.3200 2,400 to 52,000 H-1747.4400R 9,600 to 140,000 H-1747.5800R 38,000 to 5,800,000 H-1747.6Asphalt159

Viscosity1.800.544.7220 • www.humboldtmfg.comFord Viscosity Cup—Used in determining viscosity of paint, lacquers and related coatings. Cup body ismachined from aluminum; orifice is brass. Orifice not included with H-1530 cup,order from chart below. Cup-orifice combination (Ford 2, 3 or 4) should be selectedto provide an efflux time within the 20 to 100-second range. Measurements withthe Ford viscosity cup should be made at temperature of 25°C ±0.1° (77°F ±0.2°)with H-2610.17C (or H-2600.17F) thermometer. Order thermometers and standseparately. Meets ASTM D333, D365, D1200.DescriptionModelAsphaltH-1530.2Ford Viscosity Cup w/ No. 1 OrificeFord Viscosity Cup w/ No. 2 OrificeFord Viscosity Cup w/ No. 3 OrificeFord Viscosity Cup w/ No. 4 OrificeFord Viscosity Cup w/ No. 5 OrificeH-1530.1H-1530.2H-1530.3H-1530.4H-1530.5H-1535Viscosity Cup Stand— H-1535Features leveling base and adjustable support bracket for H-1530 Fordviscosity cup.Asphalt Viscosimeter Float Test Set— H-1400Used to test flow behavior or consistency of certain bituminous materials and tarproducts via a float test. Includes calibrated aluminum float and three brass collars.Individual components can be ordered. Order thermometer separately.Meets ASTM D139, AASHTO T50.DescriptionModelFloat only H-1410Collars only (set of three) H-1420H-1400Cloud and Pour Point Apparatus Set— H-2560Used to test flow characteristics of petroleum oils using cloud and pour points.Includes glass bath jar, polished brass cylinder mounted on metal tripod base,glass test cylinder, cork bottom disc and top rings, thermometer (H-2600.5F -36°to 120°F) fitted into cork for sealing test cylinder. Meets ASTM D97, D117, D2500.Shipping wt. 6 lbs. (2.7kg)DescriptionModelMetal tripod baseH-2560.1Glass test jarH-2560.3Glass battery bath jarH-2560.5Brass cylinderH-2560.2Cork disks H-2595Cork rings H-2598Thermometer, -36 to 120°FH-2600.5FThermometer, -38 to 50°CH-2600.5CThermometer, -112 to 70°FH-2600.6FThermometer, -80 to 20°CH-2600.6CH-2560Spot Test Set of Asphaltic Materials— H-1510Spot test set only for asphaltic products derived from petroleum not to be usedfor natural asphalts containing nonbituminous matter insoluble in xylene.Includes 250ml flask, box of filter paper, cork stopper and 10ml pipette.Meets AASHTO T102. Shipping wt. 5 lbs. (2.2kg)160

www.humboldtmfg.com • 1.800.544.7220Softening PointSingle, Softening Point Apparatus Set— H-1595Ring and ball method softening point apparatus used for single determinations, asphalts,pitches, tars and most resins. Includes burner, beaker, support stand, 1 ring, wire gauzewith ceramic center, thermometer clamp, 1 shouldered ring and stem with hardenedsteel ball and H-2600.113F thermometer. Meets ASTM D36, E28; AASHTO T53.Single, Softening Point Apparatus Set— H-1596Hotplate version of the H-1595.Double, Softening Point Apparatus— H-1569Includes 800ml beaker with brass, double set-up fixture with cover and thermometerport with stopper, 2 shouldered rings, 2 ball centering guides and 2 standard balls.Order thermometer separately.Quad, Softening Point Apparatus— H-1570Includes 800ml beaker with brass, quad set-up fixture with cover and thermometerport with stopper, 4 shouldered rings, 4 ball centering guides and 4 standard balls.Order thermometer separately.H-1569AsphaltIndividual Softening Point ComponentsDescription Model Use WithBrass, shouldered ring, Top: 23mm OD,19.8mm ID; Bottom: 19mm OD, 15.9mmID; Top to Shoulder: 4.4mm High; Shoulderto Bottom: 2mm High, 10 per packageH-1575 H-1569Hardened steel ball, 3/8" 99.5mm) dia.;weight between 3.45 and 3.55g,10 per packageBall centering guides for shoulderedrings, ball is centered on specimenby 3 locator pinsH-1580H-1569H-1595H-1645H-1588 H-1575H-1595Ring and stem assembly with 16" (406mm)long brass wire stemwith shouldered brass ringRing and stem assembly with 2-1/2"(64mm) long brass wire stemwith shouldered brass ringH-1602 H-1595H-1658 H-1645H-1596H-1658Steel clamp hook support suspendedthermometers, locks into any position withcheck nut, Maximum distance from centerof muff to hook: 4-1/4" (108mm),minimum distance is: 3-7/8" (89mm)H-8900All H-2600SeriesThermometersThermometer clamp with adjustable360° muff, phosphor-bronze jaws,3-1/2" (89mm) longH-8950 H-1570H-8980Thermometer clamp similar to H-8950,but holds H-1602 ring and stemand thermometer togetherH-8980 H-1595H-8900Thermometers for Softening Point ApparatusDescriptionModel30 to 180°F (ASTM 15F) Thermometer H-2600.15F-2 to 80°C (ASTM 15C) Thermometer H-2610.15C85 to 392°F (ASTM 16F) Thermometer H-2600.16F30 to 200°C (ASTM 16C) Thermometer H-2610.16C30 to 350°F (ASTM 113F) Thermometer H-2600.113F-1 to 175°C (ASTM 113C) Thermometer H-2610.113CH-1588H-1575161

Ductility Machines1.800.544.7220 • www.humboldtmfg.comDuctility Testing MachinesThese machines determine ductility of formed asphalt/cement or semi-solid bitumen by measuring the distance of elongationbefore reaching the breaking point of a briquet sample, which is pulled apart at a specific speed and temperature.Meet ASTM D113, D5892, D6084, AASHTO T51AsphaltH-1068XH-1068Humboldt Ductility Machine— H-1068XHumboldt Ductility Machine, 220V 50Hz— H-1068X.5FThe H-1068X is a three-speed machine designed for Standard andForce Ductility tests. The unit tests three briquets simultaneouslyand its DC, direct-drive motor maintains constant speed, entirelyvibration-free. Speeds of 1/4, 1 or 5cm per minute are selectedvia lever shift on mechanical gear box.A single brass lead screw mounted above water level preventsagitation of water and premature rupture of specimens. A travelingpointer adjusts to zero starting position and indicates exact positionof carriage on a linear centimeter scale attached to trough‘s frontedge. Maximum carriage travel (elongation) is 150cm with anautomatic stop.The Unit has a stainless steel interior with an overflow connection,and a baked enamel stainless steel-wrapped exterior. Gears are bronzeor brass; all other parts are solid brass to prevent rusting. Finnedstainless steel tubes beneath a false bottom provide efficient thermaltransfer. Includes a 6' (183cm) cord, feed-through switch and 3-prongplug. Includes 3 standard H-1080 briquet molds with H-1090 plates.Trough overall dimension: 11-3/4 x 74 x 6-3/8"H.H-1068PC Plastic Cover is recommended to maintain constanttank temperatures. Shipping wt. 350 lbs. (159 kg)Temperature Controlled Ductility Machine— H-1068Temp Control Ductility Machine, 220V 50Hz— H-1068.5FThe H-1068 Ductility machine takes our H-1068X machine and addsa circulating temperature control unit. Solid-state thermostaticallycontrolled bath and circulator maintain water temperature within a± 0.18°F (± 0.1°C). All features identical to the H-1068X. Includesthree H-1080 molds. H-1068PC Plastic Cover is recommended tomaintain constant tank temperatures. Shipping wt. 430 lbs. (195 kg)Circulating Temperature Controller— H-1068CCirculating Temp. Controller, 220V 50Hz— H-1068C.5FThe H-1068C Circulating Temperature Controller is designed foruse with the H-1068X Ductility Machine. It provides a solid-state,thermostatically controlled bath and circulator to maintain watertemperature within a ± 0.9°F (± 0.5°C).Clear Cover for Ductility Machine— H-1068PCTemperature control cover made from clear Plexiglas. Can beused with all ductility machines. Shipping wt. 40 lbs (18kg),(cannot ship via UPS)H-1068CH-1068PC(shown with H-1068X)162

www.humboldtmfg.com • 1.800.544.7220Ductility Machines/AccessoriesBasic Ductility Machine— H-1050Basic Ductility Machine, 220V 50Hz— H-1050.5FThe H-1050 is a three-speed machine designed for Standardand Force Ductility tests. The unit is a lower cost machine,identical to the H-1068X except that it does not include thebaked enamel stainless steel-wrapped exterior or the thermalfinned stainless steel tubes in the bottom for enhanced thermaltransfer. Shipping wt. 200 lbs. (90.7 kg)H-1050Electronic-controlled Ductility Machine— H-1075Electronic Ductility Machine, 220V 50Hz— H-1075.5FSame machine as the Basic H-1050, but includes a solid-statespeed controller, which continually adjusts feedback to maintaineven and proper speed. Direct drive 1/40 HP DC motor pullscarriage at 1/4, 1 or 5cm/min.AsphaltSingle-speed Ductility Machine— H-1070Single-speed Machine, 220V 50Hz— H-1070.5FSame machine as the Basic H-1050, but operates only at onespeed: 5cm/min. Machine uses a direct drive 1/75 HP AC motor.Refrigerated Machine, 220V 60Hz— H-1060.2FRefrigerated Machine, 220V 50Hz— H-1060.5FThis Refrigerated Ductility Machine features the H-1050machine mounted into a polypropylene bath designed foruse with sodium chloride solutions. The heavy-gauge, enamelfinishsteel cabinet is fully-insulated and the sealed spacebetween the inner and outer walls protects the low-thermalconductivity properties of the foam and fiberglass combination(tested and proven to have the best K factor). High-capacitypump assures positive circulation in bath to give closetemperature control. Three-direction flow regulation is handledwith flow cut-off valves that engage when equilibrium is reached.Sensitive magnetic setting transistorized electronic relay controlpanel for heat and refrigeration maintains temperature range of32°F (0°C) to 86°F (30°C) by 0.1°F (0.1°C. Cabinet is 90 x 41 x23". Includes 3 H-1080 molds.H-1060.2FDuctility Briquet Mold— H-1030Mold for making test briquets for use with any ductilitytesting machine. H-1030 Briquet Mold has straight sides foruse in forced tests. Requires H-1090 or H-1090.3 base plates.Four accurately machined interlocking brass segments areinterchangeable with same parts from different molds; noparts identification marks are needed for matching. End pieces,designed to hold specimens being elongated, are provided withmounting holes. Meets ASTM D5892, D6084, AASHTO T51.Ductility Briquet Mold— H-1032Mold for making test briquets to meet AASHTO T301Ductility Briquet Mold— H-1080Same as above, but mold has angled sides for use in standardtest. Meets ASTM D113Base Plate— H-1090Brass base plate for single mold. Flat surface provides uniformcontact with bottom surfaces mold. 5-1/2" x 2" x 1/8"Base Plate, Triple Mold— H-1090.3Brass base plate for triple mold. Flat surface provides uniformcontact with bottom surfaces mold. 5-1/2" x 8" x 1/8"H-1090 H-1090.3H-1030H-1080163

Force Determination1.800.544.7220 • www.humboldtmfg.comAsphaltForce Determination Adapter— H-1021Force Determination Adapter, 220V, 50/60Hz— H-1021.4FProvides precise tensile strength measurement of any material, preparation,procedure or type of test to an accuracy of 0.01 lbs. Attaches over existingpin in ductilometer without tools or machine modification, eliminating needfor dedicated equipment for standard and force ductility testing. Stainlesssteel unit has spring-loaded movable platform to which sample is attachedand stationary L-shaped base that incorporates LVDT sensor. LVDT canaccommodate two adapters simultaneously. Electric components are locatedout of the water bath. Digital display is calibrated in pounds. Includes powersupply to serve LVDT, digital display, calibration stand to ensure consistentresults, one 4-lb. and five 5-lb. slotted weights and standard 0-2 VDC analogoutput; 60ma DC power supply provides constant voltage excitation withadjustable voltage. Analog output provides easy interface with chartrecorder, computer or other readout devices via RS232 port. H-1030 moldis recommended for use with this equipment. Adapter overall dimension:6" x 5-3/8" x 1-3/4". Shipping wt. 20 lbs. (9kg)H-1021Chart Recorder— H-1026Chart Recorder, 220V, 50/60Hz— H-1026.4FFor accurate, permanent graphic record of the input signal on single-channel,multi-range potentiometric null balance servo recorder. Versatile precisioninstrument records a wide range of laboratory test results. Writing width is7-3/4" (200mm). Dim. 15" x 4-1/4" x 10". Shipping wt. 11 lbs. (4.9kg)Acrylic Tank— H-2267See-through acrylic tank is ideal for applications where visibility is desired.Temperature range up to 70°C maximum. Capacity 5-1/2 gal. (21 liters). ID,7-1/2"H x 13-1/8"W x 18"D (190 x 333 x 457mm).H-2266Heater/Circulator— H-2266Heater/Circulator, 230V 50/60Hz— H-2266.4FImmersion circulator suitable for use with any tank or jar style bath tocreate a highly accurate constant temperature circulating system at aboveambient temperatures. Minimum immersion depth 3" (8cm), maximumimmersion depth 7" (17cm). Clamp-on style fits up to 1-3/16" (3cm) wallthickness, or rod type lab stand. All stainless steel construction. Two-speedpump minimizes turbulence in small tanks, maintains greater uniformityin large tanks. Adjustable flow director accepts 1/2" (13mm) ID tubing forexternal circulation. Suitable for use with wide variety of fluids. LED set andread. Adjustable PID parameters and very precise temperature control underchanging heat loads, plus great temperature stability over a broad range.6"H x 5"D x 13"D (15.2 x 12.7 x 33cm). Shipping wt. 10 lbs. (4.5kg)Lever-Operated Grease Worker— H-2535Tests consistency of lubricating greases by penetration of the standard coneafter 60 double strokes in standard grease worker. Perforated brass platehas 51 holes, 1/4" (6.35mm) dia. Includes grease chamber, cover with stopcockand lever-operated plunger handle. Order H-2631D dial thermometerseparately. Meets ASTM D217, D937. Shipping wt. 35 lbs. (15.9kg)Micro Grease Worker— H-2515Grease worker prepares small grease samples for testing with quarter scale(1/4) H-2519 penetrometer cone. Perforated grease plate has 8-1/8" (3.2mm)dia. holes. Chamber is 3/4" dia. x 11/16" L (19 x 17mm). Order water bathsseparately. Meets ASTM D1403. Shipping wt. 10 lbs. (4.5kg)H-2515Grease Cutter— H-2540Grease cutter for block grease is mounted on cast-iron support base withplywood top. Features hardened, sharp rigidly mounted beveled blade.Meets ASTM D217. Shipping wt. 10 lbs. (4.5kg)164

www.humboldtmfg.com • 1.800.544.7220Sample Containers/SamplersAluminium Moisture BoxesFlat-bottom, straight-side seamless aluminium box has tight fitting cover, whichfits bottom of box as well. Protects sample from exposure during storage andweighing operations.Aluminium Moisture BoxesOD ID Height Inside Ht.Volumecu. in.Tin Sample CupsFlat-bottom, seamless tin sample cups have telescoping covers. Hold samplesfor determining penetrations. SelectVolumefl. oz.Model2" (51mm) 1.975 (50mm) .875" (22mm) 0.865" (22mm) 2.650 (44cc) 1.47 (44ml) H-49262.5" (64mm) 2.470 (63mm) 1.75" (44mm) 1.746" (44mm) 8.366 (137cc) 4.64 (137ml) H-49273" (76mm) 3.000 (76mm) 1" (25mm) 0.985" (25mm) 6.963 (114cc) 3.86 (114ml) H-49283.5" (89mm) 3.490 (89mm) 2" (51mm) 1.990" (51mm) 19.037 (312cc) 10.55 (312ml) H-4929H-4929AsphaltTin Sample CupsCapacity Dimensions Set Quantity Model2.5 oz (71g) 1.87" (47.7mm) ID, 1.41" (36mm) deep 48 H-1350.3A4.7 oz (133g) 2.42" (61.5mm) ID, 1.67" (42.6mm) deep 36 H-1350.4A5.6 oz (159g) 2.59" (66mm) ID, 1.72" (43.4mm) deep 36 H-1350.6A8.2 oz (232g) 3.05" (77.5mm) ID, 1.97" (50mm) deep 18 H-1350.8A16 oz (454g) 4" (102mm) ID, 2.375" (60.3mm) deep 1 H-1350.1642.3 oz (1200g) 6.12" (155mm) ID, 3" (76.2mm) deep 1 H-1350.4270.5 oz (2000g) 6.12" (155mm) ID, 5" (127mm) deep 1 H-1350.70H-1350.70Transfer Dish— H-1352Plastic transfer dish has flat bottom, straight sides and metal centering lugs withmagnet in the bottom. Size is: 3-3/4" dia. x 3-1/4" deep. Meets ASTM D5.8oz. Bacon Bomb Sampler, Brass— H-2405B8oz. Bacon Bomb Sampler, Stainless Steel— H-2405SObtains samples from storage tanks, tank cars and drums using thief method.Plunger opens to admit the sample when bomb is lowered to the bottom orwhen plunger is released at any desired level. Plunger seals tight when bomb iswithdrawn; features o-ring-type valve seal. Available in plated brass or stainlesssteel. Capacity: 8 oz; 2" dia. x 10" L. Meets ASTM D117, D270, D923, D943.Shipping wt. 5 lbs. (2.3kg)16oz. Bacon Bomb Sampler, Brass— H-2407B16oz. Bacon Bomb Sampler, Stainless Steel— H-2407SLarger capacity with same features as H-2405. 2-3/4" dia. x 12"L.Shipping wt. 9 lbs. (4.1kg)32oz. Bacon Bomb Sampler, Brass— H-2406B32oz. Bacon Bomb Sampler, Stainless Steel— H-2406SLarger capacity with same features as H-2405. 2-3/4" dia. x 15-1/4"L.Shipping wt. 15 lbs. (6.8kg)H-1352ASTM Oil Sampler, 3/4" Neck Opening— H-2400ASTM Oil Sampler, 1-1/2" Neck Opening— H-2401Weighted beaker ASTM oil sampler collects crude petroleum, petroleum products,butane, propane and other petroleum products that are gases at atmospherictemperature and pressure. Copper construction with lead-weighted bottom andbail handle. Chained cork stopper seals tight. Brass disc and loop on top alloweasy removal. Corrosion-resistant paint finish. 3/4" neck opening; body is3-3/8" dia. x 14"L. Meets ASTM D270. Shipping wt. 6 lbs. (2.7kg)H-2405H-2400165

Penetrometers1.800.544.7220 • www.humboldtmfg.comUniversal Penetrometer— H-1200Direct-reading instrument for precision penetration measurements of bituminous materials,cement, petrolatum and waxes, as well as food, cosmetics and pharmaceutical products.Unit has 5" diameter indicator dial, graduated in 400 divisions of 0.1mm, correspondingto 40mm penetration. Zero preset to eliminate errors. Includes 47.5g plunger with 3.2mmhole, and two loading weights (50g and 100g). Overall dim. 10-1/2" x 13" x 22" (266.7 x330.2 x 558.8mm). Meets ASTM D5, D217, D1168, D1191, D1321, D1403, D1831, D1855;AASHTO T49, T187 and others.AsphaltH-1200Special Application PenetrometersDescription Model Shpg. wt.Grease Penetrometer: Model H-1200penetrometer with H-2520 grease coneBattery Paste Penetrometer: Model H-1200penetrometer with H-1255 battery paste coneH-2510H-120230lbs.(13.6kg)30lbs.(13.6kg)Special Application Penetrometers are available in electric versions,like below. Call 1-800-544-7220 for information.H-1240DH-1240Electric Penetrometer— H-1240Electric Penetrometer, 230V 60Hz— H-1240.2FElectric Penetrometer, 230V 50Hz— H-1240.5FTakes our H-1200 Universal Penetrometer and adds anautomatic digital timer to it. The timer's release mechanism isswitchable between seconds minutes, or hours. Timer may beset in 1/10th second intervals. Plunger releases with push of abutton, and automatically stops after the preset time duration.H-1240.5F adds a voltage adapter and internal switch on thetiming mechanism to change cycle to 50Hz.Shipping wt. 32 lbs. (14.5kg)Digital Penetrometer— H-1240DDigital Penetrometer, 230V 60Hz— H-1240D.2FDigital Penetrometer, 230V 50Hz— H-1240D.5FThe H-1240D Penetrometer adds a digital gauge to theH-1240 electric penetrometer to provide precise at-a-glancereadings, as well as the ability to automatically start a test witha button push and have the test end after a preset duration.Shipping wt. 32 lbs. (14.5kg)Portable Penetrometer— H-1250Lighter and smaller than H-1200 for field work, unit’smicrometer adjusts for accurate settings as well as coarseadjustment for approximate settings. Only one additional50g loading weight is included. Overall dim. 7" x 7" x 16"(178 x 178 x 406mm). Shipping wt. 8 lbs. (3.6kg)Special Application PenetrometerH-1250Description Model Shpg. wt.Portable Grease Penetrometer: Model H-1250penetrometer with H-2520 grease coneH-12528lbs.(3.6kg)166

www.humboldtmfg.com • 1.800.544.7220Penetrometer Needles & ConesPenetration Needles and ConesApplication Specification Model DescriptionStandard hardened stainless steelH-1280needle, 40-45mm exposed needleBituminous materialsASTM D5; AASHTOT49, IP49; ASA Std.,A37.1; Fed Spec. SS.R.406C, Meth. 214.01H-1300H-1302H-1290length. Wt. 2.5g.Same as H-1280. Certified to ASTMaccuracy by independent laboratory.Wt. 2.5g.Same as H-1290. Certified to ASTMaccuracy by independent laboratory.Wt. 2.5g.Long hardened stainless steel needle,50-55mm exposed needle length.H-1280H-1290H-1300H-1302H-1310H-1317AsphaltWt. 2.5g.Hardened stainless steel wax penetra-Waxes with 250 orless penetrationASTM D1321H-1310tion needles with tapered point, blunttip of truncated cone. Ferrule isapprox. 3.2mm dia. Wt. 2.5g.H-1317Same as H-1310. Certified to ASTMaccuracy by independent laboratory.Battery pasteN/A H-1255Hardened stainless steel tip withspecial plunger. Total wt. 60g ± .050g.Joint sealant for asphalt& concrete pavementsGrease-testingpenetrometersASTM D5329 H-1320H-2520ASTM D217, D937ASA Std. Z11.3 H-2522Resilience ball penetration tool.Total wt. 27.5g.Hollow 90° brass cone, highly polishedstainless steel tip. Removable nut andstem. Wt. 102.5g.Same as H-2520, completely madeof stainless steel. Wt. 102.5g.H-1255H-1320For all 90° conesH-2525Stainless steel replacement tip,nut and stem.Grease-testingpenetrometers ASTM D2884 H-2524Magnesium cone and plunger, samedim. as H-2520. Total wt. cone andplunger 30.0g.Food products andpaste paintsU.S. Dept. ofAgricultureH-2529Aluminum. Same dimension asH-2520. Total wt. 35g.(shortenings, margarine,10° aluminum cone, 3.2mm ferrule,H-2519butter, etc.) Measuringfirmness of solid andAOCS Cc 16-60 H-12700.8mm stainless steel blunt tip.Overall length 106mm. Wt. 45g.H-1270plasticized fats(i.e., recovery of usedgrease) Small obtainablesamplesASTM D1403 H-25191/4 scale. (Not considered a substitutefor full-size cone specified in ASTMD217.) Wt. 9.38g.H-2520H-2522H-2529167

Distillation1.800.544.7220 • www.humboldtmfg.comAsphaltH-1910.6H-18355H-2600.8FH-1940H-1910.3H-25885H-1945H-6220H-21700H-1910.3SH-8002H-1910.1H-1910.1SH-2340RSH-8390H-1910.7SH-2340H-2290BH-1910.4H-2340RSH-2290AH-8342H-8522H-2330H-6220H-2600.7FH-2345TTSH-2345TSH-8300H-1876H-2345H-21222H-21212H-21212 H-21212H-4915.100H-1910 H-2285H-21232Distillation of Cut-Back Asphaltic(Bituminous) Products— H-1910Distillation apparatus accurately determines residue content andseparates volatile and non-volatile cut-back asphaltic products.Fahrenheit thermometers furnished standard. Meets ASTM D402;AASHTO T78. Shipping wt. 18 lbs. (8.2kg)Emulsified Asphalts Distillation Apparatus— H-2285Distillation apparatus accurately determines representative portionof residue in emulsified asphalts. Fahrenheit thermometers furnishedstandard. Meets ASTM D244; AASHTO T59.Shipping wt. 30 lbs. (13.6kg)Individual Items Included in H-1910DescriptionModelFlaskH-1910.3CondenserH-1910.1AdapterH-1910.4Distillation Shield H-1940Flame Shield H-1945ThermometerH-2600.8FGraduated CylinderH-4915.100Burner H-6220Clamp H-8002Support Ring H-18355Support Stand H-21212Support Stand H-21222Support Shelf H-21700Wire Gauze H-25885Individual Items Included in H-2285DescriptionModelRing Burner H-1876AdapterH-1910ABent Glass TubeH-2290AFunneled TubeH-2290BTube Shield H-2330Condenser H-2340Aluminum Still H-2345ThermometerH-2600.7FGraduated CylinderH-4915.100Burner H-6220Clamp H-8300Clamp Holders (2 in set) H-8342Clamp H-8390Clamp H-8522Ring H-18355Support Stands (2 in set) H-21212Support Stand H-21232Support Shelf H-21700168

www.humboldtmfg.com • 1.800.544.7220DistillationH-2990AH-2600.7FH-8572H-8390H-2340RSH-8340H-2330H-2430.3H-8300H-1910.7SH-2340H-1910.4H-2340RSH-6220H-8300H-8522H-2345TTSH-1876H-1871H-21700H-8572H-2430.3H-8300H-2430.4H-2435AsphaltH-2435H-2430.1H-4915.100H-21212H-2290H-21212H-21232Emulsified Asphalts Water ContentDistillation Apparatus— H-2290Same as H-2285 with smaller still, H-1871, substituted for H-2345 still.Meets ASTM D244; AASHTO T59. Shipping wt. 30 lbs. (13.6 kg)H-1871H-1876H-2440, H-2442H-8300H-21232H-21232H-2430Dean-Stark Electric Apparatus— H-2430Dean-Stark Electric Apparatus, 220V 50Hz— H-2430.5FElectrically heated apparatus determines water content in petroleumproducts and other bituminous materials. Meets ASTM D95, D244,E123; AASHTO T55, T59. Shipping wt. 30 lbs. (13.6kg)Individual Items Included in H-2430DescriptionModel0 to 750W Electric Rheostat Heater H-2430.1CondenserH-2430.3FlaskH-2430.420ml Distilling Receiver Trap with Stopcock H-2435.20Clamp H-8300Burette Clamp H-8572Rectangular Support Stand with Rod H-21232Dean-Stark Gas-Heated Apparatus— H-2440Gas heated apparatus determines water content in petroleumproducts and other bituminous materials. Uses the same componentparts as the H-2430, except instead of an electric heater and flask,it includes a Tar Still and Ring Burner (listed below).Meets ASTM D95, D244, E123; AASHTO T55, T59.Shipping wt. 30 lbs. (13.6kg)Items Included in H-2440DescriptionModelTar Still H-1871Ring Burner H-1876Distillation Apparatus for Volatile Distillates— H-2442.25Same components as the H-2440, but the distilling receiver is atrap for volatile fractions of bitumen. Included Trap is graduated0 to 5ml in 0.1ml divisions. Meets ASTM D1461; AASHTO T110.Shipping wt. 25 lbs. (11.3kg)Distillation Apparatus for Moisture Distillates— H-2442.10Same components as the H-2440, but the distilling receiver is atrap for moisture distillates of bitumen. Included Trap is graduated0 to 5ml in 0.1ml divisions. Meets ASTM D1461; AASHTO T110.Shipping wt. 25 lbs. (11.3kg)Note: See following page for distillation accessories and replacement parts.169

Distillation Accessories1.800.544.7220 • www.humboldtmfg.comAluminum Tar Still— H-1871Used with H-2290 for determining water in crude petroleum, tars andderivatives of those materials. Cover has 1 tubulure. Dimensions: 3-1/2"(89mm) ID x 6" (152mm) Inside depth. 1 qt. (0.9 liter) capacity. Castaluminum. Meets ASTM D95, D370, D1461, AASHTO T55, T59, T83, T110.AsphaltH-2345H-1871Aluminum Alloy Still— H-2345Used with H-2285 for identifying cationic emulsions and as a container todetermine water content and residue by distillation and evaporation.Cover has 3 tubulures (2 drilled 10/18 and 1 drilled 24/40), 3-3/4"(95mm) ID x 9-1/2" (241mm) inside depth. Meets ASTM D95, D244,AASHTO T55, T59, T110.Aluminum Alloy Still— H-2346Same as H-2345, except cover has 4 tubulures (3 drilled 10/18 and1 drilled 24/40)Stoppers for use with above Stills:Glass Tube Stopper— H-2345TSThermometer Stopper— H-2345TTSH-1876H-1945Ring Burner— H-1876Can be used with all gases. 4-3/4" (121mm) ID x 5-1/2" (140mm) OD.Overall shank length is 11" (279mm) with 3/8" (10mm) serrated hoseconnection. Guide pins keep burner equidistant around still. Fletcherattachment regulates gas and air. Meets ASTM D244, AASHTO T59.Distillation Shield— H-1940Use with H-1880. Flanged, open-end, stainless steel cylinder with 1/8" ceramiclining and two-part cover. For use with 500ml flask. Flame distillation only.Meets ASTM D402, AASHTO T78.Flame Shield— H-1945Use with H-1880. Stainless steel, spot-welded cone 2" (51mm) dia. at bottomwith spring clip to fit 7/16" to 5/8" (11 to 16mm) burner tubes. Meets ASTMD402, AASHTO T78.H-2348Burner Chimney— H-1946Fits standard 4" (102mm) rings.H-2340H-1946Connecting Tube Shield— H-2330For use with H-2285 and H-2290. Stainless steel. Meets ASTM D244,AASHTO T59.Condenser Jacket— H-2340For use with H-2285 and H-2290. Brass, 15" long inlet/outlet tubulures onopposite sides of jacket. Meets ASTM D244, AASHTO T59.H-2330Still Cleaner— H-2348Use with H-1871 and H- 2345. Tool to remove residue from interior of still,13" x 4" (328 x 101mm) dia.H-1940170

www.humboldtmfg.com • 1.800.544.7220Distillation Traps/Particle Charge MeterH-2435.25H-2435.20H-2435.10H-2435.5Asphalt25ml Cap Trap For Volatile Distillates— H-2435.2525ml cap trap graduated 0.1ml from 0 to 25ml. Meets ASTM D95, D1461.20ml Distillation Trap— H-2435.2020ml distillation trap graduated in 0.2ml. Optional for ASTM D9510ml Cap Trap For Moisture Distillates— H-2435.1010ml cap trap graduated 0.1ml from 0 to 1ml, 0.2ml from 1ml to 10ml.Meets ASTM D95, D1461.5ml Cap Distillation Trap— H-2435.55ml cap distillation trap, graduated 0.1ml. Meets ASTM D95, D1461.Particle Charge Meter— H-2450Particle charge meter identifies cationic emulsified asphalt, using 0-10DC millimetercontrolled by variable resistor. Fail-safe design prevents exceeding meter capacity.Includes positive- and negative-identified test clips and 3-wire plug. Order stainlesssteel plates separately. Meets ASTM D244; AASHTO T59.Note: Order H-1042 Transformer for 220V operation.H-2450Particle Charge Meter Plates— H-2452Set of two 1" x 4" (25.4 x 101.6mm) stainless steel plates for use with H-2450.Bitumen Soluble in Organic Solvents Set— H-1550Used to determine solubility of asphalt cement materials. Meets ASTM D4, D2042AASHTO T44. Shipping wt. 9 lbs.Replacement Parts, Model H-1550Gooch crucibleCrucible holderBuchner funnelGlass fiber filtersDescriptionModelH-1550.1H-1550.2H-1550.3H-1550.8Chapman filter pump H-120203/8” Threaded coupling H-12155Flask filter ringStopper #7H-4913.500H-1550.5H-1550171

Flash Point1.800.544.7220 • www.humboldtmfg.comAsphaltCleveland Open Cup Flash Tester, Electric— H-2085Cleveland Flash Tester, 220V 50/60Hz— H-2085.4FThermometer position is adjustable. Meets ASTM D92, D117;AASHTO T48. Shipping wt. 20 lbs. (9.1kg)Replacement Parts, Model H-2085, H-2085.4FDescriptionModelElectric Heater with RheostatH-2085.1Flash-Point PlatformH-2085PTest Burner H-2112Flash Cup H-2060ThermometerH-2600.11FCleveland Flash and Fire Point Tester,Natural Gas— H-2095One source supplies gas for both heating and test flame.Replacement parts available separately. Meets ASTM D92, D117;AASHTO T48. Shipping wt. 20 lbs. (9.1kg)Replacement Parts, Model H-2095DescriptionModelCast Iron tripod base with Steel Support Rod H-21335High Temp Burner w/ Adj. Valve OrificeH-5605XFlash-Point PlatformH-2095PTest Burner H-2112Flash Cup H-2060ThermometerH-2600.11FH-2600.11FH-2600.11FH-2060H-2060H-2112H-2085PH-2112H-5605XH-2095PH-2085.1H-21335172

www.humboldtmfg.com • 1.800.544.7220Flash Point/Carbon ResidueCleveland Flash and Fire Point Tester— H-2100Uses natural gas. Thermometer and cup platform positions areadjustable up and down on support rod. Meets ASTM D92, D117;AASHTO T48. Shipping wt. 17 lbs. (7.7kg)H-2600.11FH-8900Replacement Parts, Model H-2095DescriptionModelCast Iron, tripod base with Steel Support Rod H-21335Support rod H-21370Burner H-5550Test burner H-2112Flash-Point PlatformH-2095PThermometer clamp H-2113Cup platform H-2111Flash cup H-2060ThermometerH-2600.11FH-2112H-5550H-21370H-2060H-2111H-21335AsphaltH-2100Tag Open-Cup Flash Tester, Electric— H-1990Tag Open-Cup Flash Tester, 230 50/60Hz— H-1990.4FFor determination of flash points of liquids having a flash point up to 230°F(110°C) and cutback asphalts with flash points of less than 200°F (93°C).Includes Pyrex cup, base and liquid bath with overflow, pivoting ignition taperwith pilot light and reference bead and thermometer holder. Order H-2610.9Cthermometer, leveling device and draft shield separately. Meets ASTM D1310,D3143; AASHTO T79. Shipping wt. 9-1/2 lbs. (4.3kg)Tag Open-Cup Flash Tester, Gas— H-1995Same unit as above, but uses gas to operate.H-1990Replacement Parts, Model H-1990 and H-1995DescriptionReplacement Pyrex cupLeveling deviceDraft shieldThermometer, range: 20 to 230°FThermometer, range: -5 to 110°CModelH-1990.1H-1990.2H-1990.3H-2600.9FH-2610.9CH-2060Flash Cup— H-2060Used with Flash Point Testers, H-2085, H-2095 and H-2100.Conradson Carbon Residue Apparatus— H-2495Tests petroleum products to determine the amount of carbon residue leftafter evaporation and pyrolysis of an oil and to indicate relative coke-formingpropensities. Includes burner, tripod, refractory block, nickel chrome triangle,nickel crucible and cover, Skidmore crucible, porcelain crucible and monelhood and bridge. Component parts available separately. Meets ASTM D189,D2416. Shipping wt. 7 lbs. (3.2kg)Replacement Parts, Model H-2495DescriptionModelPorcelain crucible H-2494Skidmore crucible and cover H-2497Carbon residue apparatus hood H-2496Nickle crucible with cover H-2498Refractory block insulator ring H-2505H-2495173

Centrifuge Extractors1.800.544.7220 • www.humboldtmfg.comCentrifuge ExtractorsFor quantitative determination of bitumen content in paving mixtures, centrifuge extractor operation requires relatively short time.Sample is weighed, heated slightly until it starts crumbling, cooled, placed in rotor bowl and solvent is added. Centrifugal actionforces liquid through a filter paper ring at bowl’s periphery, and process is repeated until expelled solvent is clear color.Aggregates are weighed and graded. Weight before and after extraction determines constituent proportions.All motorized units have accurate, dependable electronic solid state speed control; rotation speed adjusts up and down.Electric brake stops rotation in less than 10 seconds. Explosion-proof motorized units offer same features along with greater safety.Hand-driven unit is ideal for field application or labs with light duty. Units are corrosion-resistant lightweight cast aluminum.Includes 10 filter rings. Extra bowls recommended to speed multiple batching; order separately. Meets ASTM D2172 (Method A).AsphaltCentrifuge Extractors, Analog Control, Cast Aluminum ConstructionDimensions are: 18" x 18" x 18" (457 x 457 x 457mm)CapacityOpen Motor115V 60HzExplosion-Proof Motor115V 60Hz220V50/60Hz1500g H-1456 H-1466 H-1466.4F3000g H-1471 H-1473 H-1473.4FShippingWt.75 lb(33kg)80 lb(36kg)Filter RingReplacementsH-1487.6274 micron retention10" OD x 5" IDPackage of 100H-1489.6274 micron retention12-1/4" OD x 5" IDPackage of 100H-1456Centrifuge Extractors, Digital Control, Cast Aluminum ConstructionController can be wall mounted to minimize vibrations. Push button and walk away while machine runsunattended. Memory holds “last test” cycle settings. Shuts off automatically at end of test cycle.Dimensions are: 18" x 18" x18" (457 x 457 x 457mm)CapacityOpen Motor115V 60HzExplosion-Proof Motor115V 60Hz220V50/60Hz1500g H-1460 H-1461 H-1461.4F3000g H-1464 H-1465 H-1465.4FShippingWt.76 lb(35kg)80 lb(36kg)Filter RingReplacementsH-1487.6274 micron retention10" OD x 5" IDPackage of 100H-1489.6274 micron retention12-1/4" OD x 5" IDPackage of 100H-1461Replacement Parts, Models H-1456 to H-1473DescriptionModelAluminum Bowl, Model H-1456, H-1466 H-1456BAluminum Bowl, Model H-1471, H-1473 H-1471BBowl Cover, Model H-1456, H-1466 H-1456 BCBowl Cover, Model H-1471, H-1473 H-1471BCCover NutH-1456NClamp for all modelsH-1471CRubber Viton O-ring for all models H-1471RVBrake band for all modelsH-1456BBBrake Band Assembly for all models H-1471BBA174

www.humboldtmfg.com • 1.800.544.7220Centrifuge ExtractorsCentrifuge Extractors, Analog Control, Value LineDimensions are: 12" x 22" x 20" (304 x 559 x 508mm)CapacityOpen Motor115V 60Hz220V50/60HzExplosion-Proof Motor115V 60Hz220V50/60HzShippingWt.Filter RingReplacements1500g H-1452 H-1452.4F H-1451 H-1451.4F85 lb(39kg)H-1481.6276 micron retention9-3/4" OD x 1-3/4" IDPackage of 1003000g H-1474 H-1474.4F140 lb(64kg)Centrifuge Extractors, Hand DrivenHand-drive model with machine-cut gears and anti-friction bearingsoperating in an oil bath. Dimensions are: 13" x 13" x 17" (330 x 330 x 432mm)H-1485.6276 micron retention11-5/8" OD x 5" IDPackage of 100H-1451H-1452H-1474AsphaltCapacityModelShippingWt.Filter RingReplacements1500g H-147850 lb(23kg)H-1481.6276 micron retention capability9-3/4" OD x 1-3/4" IDPackage of 100Replacement Parts, Model H-1478DescriptionAluminum BowlBowl CoverCover NutModelH-1478BH-1456BCH-1456NH-1478Filter PapersFor use with Centrifuge Extractors and Reflux Extraction SetsSizeFilter SpeedFlow Rate(ml/min.)ThicknessRetention(µm)Per Pkg.Model9-3/4" x 2-1/2" medium 85 0.71 4 100 H-1480.6279-3/4" x 1-3/4" medium 85 0.71 4 100 H-1481.62710" x 5" medium 85 0.71 4 100 H-1487.62712-1/4" x 5" medium 85 0.71 4 100 H-1489.62711-5/8" x 1-3/4" medium 85 0.71 4 100 H-1485.62733cm dia. Very Fast 360 0.51 48 50 H-1497.61733cm dia. Very Fast 435 1.02 31 100 H-1497.63333cm dia. Fast 235 0.25 24 100 H-1497.61533cm dia. Medium 60 0.17 6 100 H-1497.61333cm dia. Medium 85 0.71 4 100 H-1497.62740cm dia. Medium 85 0.71 4 100 H-1498.62740cm dia. Medium Fast 60 0.17 6 100 H-1498.61340cm dia. Medium Fast 235 0.25 24 100 H-1498.61540cm dia. Very Fast 300 0.51 48 50 H-1498.617175

Centrifuge Extraction1.800.544.7220 • www.humboldtmfg.comH-1448H-1448GSAsphaltH-1449H-1857Vacuum Extractor— H-1448Used for quantitative determination of bitumen in hot-mixed pavingmixtures and pavement samples. Unit is a stainless steel 3000gcapacity combination vacuum/storage tank with a 12" (305mm) dia.filtering surface. Unit includes connecting hose, (100) H-1497.613filter papers, test procedure, see-through extraction gauge, sighttube and vacuum gauge. For replacement filter paper, use H-1497series. Meets ASTM D2172 (Meth. E); AASHTO T164 (Method E).Shipping wt. 84 lbs. (38kg)For vacuum pump, order H-1763A pump separately.4000cc Erlenmeyer Flask— H-4913.4MMeets ASTM D2172; AASHTO T164 (Method E)8" Sieve Adapter for Vacuum Extractor— H-1447Vacuum Extractor— H-1449H-1448 Vacuum Extractor without storage tank, gaugeand sight tube. Shipping wt. 60 lbs. (27kg)H-1448 and H-1449 Extractor Replacement PartsDescriptionModelFluorosilicone o-ringH-1448.1Gauge, H-1448H-1448GGlass Tubing, includes 2 o-ringsH-1448GTFree-flow vacuum plateH-1448GSStainless Steel Plate, as providedH-1448PStainless Steel Plate, Heavy-Duty H-1448HPRubber TubingH-1448RTClear, Heavy-wall, Vacuum Tubing H-14464,000cc Erlenmeyer Flask, meets ASTMD2172 and AASHTO T164 (Method E0H-4913.4M8" Sieve adapter H-1447Free-Flow Vacuum Plate— H-1448GSPrevents vacuum flow problems when performing vacuum extractortests. This heavy-duty stainless steel plate won’t draw down whenvacuum is applied. Prevents blockage of flow holes. Solventalways passes through freely for consistently accurate test results.Eliminates problems and speeds testing. Can be used with bothmodels H-1448 and H-1449 Vacuum Extractors.Filterless Centrifuge Extractor— H-1857Filterless Centrifuge Extractor, 230V 50Hz— H-1857.5FThe Continuous-flow Filterless Centrifuge Extractor is ideallysuited for use in the extraction of mineral fines from bitumen-ladensolvents obtained from standard asphalt extraction tests. Inoperation, the solvent suspension is fed through the top funnelinto a special aluminum beaker. Using the high, 11,000 rpmcentrifugal force, the liquid moves up the beaker wall and outthe overflow tube while the solids remain for easy removal at testcompletion. The system allows the continuous feeding of thesuspension until the solids-retaining capacity of the beaker isreached. The unit is supplied complete with a No. 18 (1.0mm) andNo. 200 (75µm) sieve for placement at the top of the inlet funnel.Using this arrangement, an asphalt mix extraction test can becarried out by pre-dissolving the mix with solvent and then pouringthe sample into the sieve. Meets ASTM D1856; AASHTO T164,T170. Dimensions: 20" x 15" x 33" (508 x 380 x 840mm).Shipping wt. 150 lbs. (68kg)176

www.humboldtmfg.com • 1.800.544.7220Reflux Extraction/Asphalt DispenserReflux Extractor Set, 1000g— H-1495Reflux Extractor Set, 220V 50/60Hz— H-1495.4FUsed to determine the percentage of bitumen in a paving mixture using hotsolvent extraction. Each cone has 500g capacity. Set includes: 2 Wire ScreenCones, Copper Condenser with 1/2" inlet/outlet water tubes, Glass Jar 6" ODx 18" H (152mm x 457mm) with ground open edges for a tight fit, a H-4950,6" square Hot Plate and a 100-pack of 33cm Filter Paper. Components areavailable individually below.Meets ASTM D2172; AASHTO T164 (Method B). Shipping wt. 26 lbs. (12kg)H-1495 Extractor ComponentsDescriptionModelWire Screen Cone Sample Holder (set of 2) H-1495.1Copper Condenser w/ inlet/outlet water tubes H-1495.2AGlass Jar with ground open edgesH-1495.3Electric Hot Plate H-4950Filter Paper, 33cm, 100-packH-1497.613H-1495.1H-1499.1AsphaltReflux Extractor Set, 2000g— H-1499Reflux Extractor Set, 220V 50/60Hz— H-1499.4FSimilar to H-1495 except cones have 1000g capacity. Set includes: 2 WireScreen Cones, Copper Condenser with 1/2" inlet/outlet water tubes, Glass Jar8-3/4" OD x 18" H (222mm x 457mm) with ground open edges for a tight fit,a H-4951, 9" square Hot Plate and a 100-pack of 40cm Filter Paper.Components are available individually below.Meets ASTM D2171; AASHTO T164 (Method B). Shipping wt. 26 lbs. (12kg)H-1495.2AH-1499.2AH-1495H-1499H-1499 Extractor ComponentsDescriptionModelWire Screen Cone Sample HolderH-1499.1Copper Condenser w/ inlet/outlet water tubes H-1499.2AGlass Jar with ground open edgesH-1499.3Electric Hot Plate H-4951Filter Paper, 33cm, 100-packH-1498.613H-4950H-1494Pressure Limit Device— H-1494For use with Reflux Extractor Kits to protect copper condenser from excessivepressure. For use with 3/8" tubes.Asphalt Dispenser, 6 Qt.— H-1440Asphalt Dispenser, 6 Qt., 220V 50/60Hz— H-1440.4FRound melting pot has stainless steel crucible (18 gauge) & shell (20 gauge)to facilitate easy clean up. Choice of 6 quart, or 12 quart model. Includesheavy duty, adjustable bench mounting stand which fits either size. Dual-pointtemperature control allows independent temperature for pot (0-350°) and forvalve (1-10°). Digital display may be read in either Centigrade or Fahrenheit.Other features include: multiple-circuit blanket heater for very uniform heat;no-drip 1" ball valve dispenser, 7-1/4" (184mm) above work surface; 50 wattvalve heater; 3" (76mm) fiberglass insulation; separate aluminum cover; 6'power cord. 6-qt Capacity— 800 watts; OD = 10-1/4" dia. x 14" height (260x 356mm). ID = 6-3/4" dia. x 7-1/4" depth (171 x 184mm). 12-qt Capacity—1,200 watts; OD = 15" dia. x 17" height (381 x 432mm). ID = 10" dia. x 9-1/2"depth (254 x 241mm). (Valve & controls excluded from dimensions.)Shipping wt. 30 lbs. (13.6kg)H-1440Asphalt Dispenser, 12 Qt.— H-1442Asphalt Dispenser, 12 Qt., 220V 50/60Hz— H-1442.4FLike H-1440, but has 12 quart capacity. Shipping wt. 43 lbs. (19.5kg)177