Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
New version of Home Made Grinding <strong>Jig</strong><br />
This is a picture of the “New and Improved Version” (Sounds like a soap add<br />
on TV!). My friend Claude bought some used gouges and they were too short<br />
to sharpen with his jig so I modified the plans. It gives more room for a big<br />
handle close to the jig and almost 1” more to sharpen. That should keep him<br />
happy for a while! If he woodturn’s more than he sharpens… The travel and<br />
angle of the jig are exactly the same for both models.<br />
Both plans come in the “Bundle”, just decide to print or not, build or not,<br />
turn or not, chips or nuts…<br />
Have fun and work safely!<br />
<strong>Jean</strong> Michel.<br />
2002-03-24
6 1 8<br />
1<br />
4<br />
1<br />
8 R<br />
1 3 8<br />
1<br />
2<br />
6 1 8<br />
13<br />
32<br />
2<br />
13<br />
16<br />
1<br />
2 R<br />
3<br />
16 R<br />
3<br />
16 R 11 3 8<br />
Dado made to accomodate Bee-Line Mini channel B-72<br />
1 7 8<br />
8 1 2<br />
NOTE:<br />
B-72 Mini Channel is held with small #6-32 screws 3/16" long and T-Nuts.<br />
T-Nuts must be grinded shorter to fit and recessed in the wood. Mini Channel must<br />
be drilled and tapered to recess bolt heads.<br />
T Holder is held to bench with Hanger Bolts that are 1/4" screws that have a<br />
machined bolt threaded head 1/4"-20 with wing nuts or other means<br />
of attachement 1/4" in DIA. 6 1/8" apart and centering the jig to the grinder wheel.<br />
Hanger Bolt<br />
Toolrest T holder (Grinder)<br />
<strong>Jean</strong> Michel<br />
1" = 2.5"<br />
In Deltacad<br />
Toolrest holder for jigs & tools.<br />
Baltic Birch 11/16" (18mm)<br />
2001-11-20<br />
1 of 1
1<br />
2 R<br />
1<br />
4<br />
1 5 8<br />
1<br />
8 R<br />
7<br />
16<br />
1 1 8<br />
3<br />
8<br />
1<br />
2<br />
1 3 8<br />
3<br />
1<br />
16 R<br />
1<br />
8 R<br />
16 DIA Grind flush to bottom<br />
2 3 8<br />
1 7 8<br />
11<br />
16<br />
8 1 2<br />
2 1 4<br />
NOTE: The Base for the Veritas tool rest is held to bench with Hanger<br />
Bolts, they are 1/4" wood screws that have a machined bolt threaded head<br />
1/4"-20 with wing nuts or other mean of attachement 1/4" in DIA.<br />
This tool rest is used to true the stones on the grinders with it's Veritas<br />
Grinding <strong>Jig</strong> and Diamond point. Also used to grind wood chisels to<br />
grind wood chisels<br />
Base for Veritas Tool Rest<br />
<strong>Jean</strong> Michel<br />
1" = 2" 2002-01-13<br />
Hold down base for Veritas Tool Rest<br />
Baltic Birch 11/16" (18mm) 1 of 1
1 5 8<br />
1<br />
2 R<br />
1<br />
4<br />
1 5 8<br />
1<br />
8 R<br />
1<br />
2<br />
2<br />
15<br />
16 R<br />
13<br />
16<br />
2 9<br />
16<br />
1 5 8<br />
9<br />
16<br />
15<br />
16<br />
11<br />
16<br />
1 7 8<br />
8 1 2<br />
Pivot point for pivoted holder<br />
NOTE: The Pivot Holder is held to bench with Hanger Bolts, they are 1/4"<br />
screws that have a machined bolt threaded head 1/4"-20 with wing nuts<br />
or other mean of attachement 1/4" in DIA.<br />
<strong>Jean</strong> Michel<br />
1" = 2" 2001-11-20<br />
Hold down hinge for pivoted holder<br />
Baltic Birch 11/16" (18mm)<br />
1 of 1
1 3 8<br />
3<br />
16<br />
1<br />
4 R 2<br />
1<br />
11<br />
4 R<br />
16<br />
1<br />
5<br />
8 R<br />
1<br />
2 R<br />
13<br />
16<br />
27<br />
Pre drill 1/16" DIA. 1 1/2" deep<br />
4 DIA 7<br />
1<br />
1<br />
3<br />
1 15<br />
1<br />
2<br />
8<br />
16 DIA 16<br />
2 DIA<br />
2 5 9<br />
13<br />
8<br />
16<br />
32<br />
3<br />
16 DIA 1<br />
4 R<br />
11<br />
16<br />
Dado for Bee-Line B72 Mini channel.<br />
13<br />
32<br />
5<br />
16 R 1<br />
4 R<br />
5<br />
8<br />
1 1<br />
32<br />
3<br />
16<br />
2<br />
1<br />
4 R<br />
1 1<br />
16<br />
3<br />
4<br />
13<br />
16<br />
7<br />
16<br />
1<br />
2<br />
1<br />
4 R<br />
2 1 2<br />
11<br />
16<br />
1 1<br />
16<br />
5<br />
16<br />
Pre drill 13/64" for tapping 1/4" x 20TPI<br />
Maple or other hard wood 5/16" thick.<br />
Hinged adjustable lock for height of pivoting holder<br />
Held with 3/8" x 1 1/4" carriage bolts grinded with two flats<br />
to enter in B-72 Mini Channel screwed head down under grinder bench<br />
11<br />
16<br />
1<br />
11<br />
16<br />
3<br />
8 DIA<br />
18 + or -<br />
Hard wood dowel<br />
2<br />
5<br />
NOTE: B-72 Mini Channel is held with small #6-32 flat<br />
head machine screws 1/4" long and T-Nuts. T-Nuts<br />
must be grinded shorter to fit in the wood and the holes<br />
in the channel have to be countersunk for the screw heads.<br />
1<br />
4 R<br />
Pivoting jig holder (Grinder)<br />
<strong>Jean</strong> Michel<br />
1" = 2"<br />
Pivoting holder for grinding jigs.<br />
Baltic Birch 11/16" (18mm)<br />
2001-11-20<br />
1 of 1
3 7<br />
32<br />
11<br />
16<br />
1 1 4<br />
90°<br />
5<br />
3<br />
4 R 3<br />
4<br />
5 21<br />
32<br />
3<br />
8 DIA<br />
2 53<br />
64<br />
1 47<br />
64<br />
40°<br />
11<br />
16<br />
1 1 2<br />
2<br />
1 53<br />
64<br />
Note: Held down with 3/8" DIA. x 1 1/4" long carriage bolts<br />
with head grinded with two flats to fit in Bee Line B-72 Mini channel.<br />
11<br />
16<br />
Gouge handle and jig rest<br />
<strong>Jean</strong> Michel<br />
1" = 2"<br />
In Deltacad<br />
Baltic Birch 11/16" (18mm)<br />
2001-11-20<br />
<strong>Jig</strong> support and gouge handle holder.<br />
1 of 1
Dado made to accomodate Bee-Line Mini channel B-72<br />
1<br />
4 R<br />
19<br />
3<br />
4 R 1 7 8<br />
32<br />
13<br />
16<br />
8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8<br />
3<br />
4 R 1 3 4<br />
32<br />
31<br />
2 3 8<br />
4 1 4<br />
3 1 2<br />
3<br />
16 R<br />
3<br />
4<br />
17 1 2<br />
8 3 4<br />
13<br />
32<br />
7<br />
11<br />
16<br />
2<br />
3<br />
4<br />
11<br />
16<br />
4 1 4<br />
Skewchisel rest holder<br />
<strong>Jean</strong> Michel<br />
1" = 2.5"<br />
In Deltacad<br />
2001-11-20<br />
Note: Held down with 3/8" DIA. x 1 1/4" long carriage bolts<br />
with head grinded with two flats to fit in Bee Line B-72 Mini channel.<br />
Holds skew chisels handle rests.<br />
Baltic Birch 11/16" (18mm)<br />
1 of 1
3 7<br />
32<br />
1 3 4<br />
11<br />
16<br />
3 1 2<br />
3<br />
4<br />
90°<br />
15<br />
3<br />
64<br />
3<br />
4 R<br />
5 21<br />
32<br />
2 53<br />
64<br />
3<br />
4<br />
Indexing<br />
line<br />
8 DIA 1 of 1<br />
1 1 2<br />
11<br />
16<br />
11<br />
16<br />
Note: Held down with 3/8" DIA. x 1 1/4" long carriage bolts<br />
with head grinded with two flats to fit in B-72 Mini channel.<br />
Skew chisels handle rest<br />
<strong>Jean</strong> Michel<br />
Baltic Birch 11/16" (18mm)<br />
1" = 2" 2001-11-20<br />
Base (2 needed) for the adjustable jig<br />
for skew chisels.
3<br />
8<br />
1<br />
2 R<br />
1 1 8<br />
1<br />
2<br />
2<br />
90°<br />
3<br />
4<br />
7<br />
8<br />
1 7 8<br />
7<br />
8<br />
3<br />
4<br />
1 15<br />
64<br />
1 R<br />
3<br />
8 DIA<br />
3<br />
4<br />
2<br />
Note: Held down with 3/8" DIA. x 1 1/4" long carriage bolts<br />
with head grinded with two flats to fit in Bee Line B-72 Mini channel.<br />
11<br />
16<br />
2 5 8<br />
Hanger Bolt<br />
7<br />
Pre Drill<br />
1 5 8 Min.<br />
1<br />
4 DIA<br />
1 3 8<br />
11<br />
16<br />
5<br />
16<br />
32 DIA 1<br />
4<br />
DIA<br />
3 5 8<br />
15<br />
16 R<br />
2 1 4<br />
15<br />
16<br />
Low Toolrest (Grinder)<br />
5<br />
8<br />
1<br />
8<br />
3<br />
8<br />
11<br />
16<br />
1<br />
2 7 8<br />
<strong>Jean</strong> Michel<br />
1" = 2"<br />
In Deltacad<br />
2001-11-20<br />
Tool rest for scrapers on pivoted holder.<br />
<strong>Jig</strong> rest for both T holders.<br />
4<br />
4<br />
Baltic Birch 11/16" (18mm)<br />
1 of 1
1 1 8<br />
1<br />
8 R<br />
1<br />
2<br />
1 1 8<br />
1<br />
2 R<br />
3<br />
8<br />
3<br />
8 DIA<br />
3 5 8<br />
3<br />
4<br />
7<br />
8<br />
1 7 8<br />
4<br />
1 R<br />
2<br />
3<br />
4<br />
3<br />
8 DIA<br />
2 5 8<br />
4<br />
Hanger Bolt<br />
1 5 8 Min<br />
Pre Drill<br />
7<br />
32 DIA 1<br />
4<br />
DIA<br />
2 5 8<br />
11<br />
16<br />
1 3 8<br />
15<br />
16 R 15<br />
16<br />
5<br />
16<br />
4 1 4<br />
High Toolrest (Grinder)<br />
<strong>Jean</strong> Michel<br />
1" = 2.5"<br />
In Deltacad<br />
2001-11-20<br />
11<br />
16<br />
Note: Held down with 3/8" DIA. x 1 1/4" long carriage bolts<br />
with head grinded with two flats to fit in Bee Line B-72 Mini channel.<br />
Toolrest for scrapers on fixed T holder.<br />
Baltic Birch 11/16" (18mm)<br />
1 of 1
NOTE: The Flat Rest is hinged to it's mounts with Hanger Bolts, they are 1/4"<br />
wood screws that have a machined bolt threaded head 1/4"-20 with wing nuts.<br />
1<br />
2<br />
1 1 8<br />
1<br />
2 R<br />
1 1 8<br />
1<br />
2 R<br />
3<br />
8 DIA<br />
3<br />
8<br />
3<br />
4<br />
7<br />
8<br />
1 7 8<br />
2 1 4<br />
4<br />
1 R<br />
2<br />
3<br />
4<br />
3<br />
8 DIA<br />
2 5 8<br />
1<br />
4 R<br />
4<br />
Hanger Bolt<br />
3<br />
1 5 Pre Drill<br />
8 Min<br />
16 DIA 1 1 8<br />
2 5 8<br />
11<br />
16<br />
15<br />
16 R 15<br />
16<br />
1<br />
4 DIA<br />
5<br />
16<br />
5 3 8<br />
High Toolrest (8" Grinder)<br />
<strong>Jean</strong> Michel<br />
1" = 2.5"<br />
In Deltacad<br />
2002-03-15<br />
11<br />
16<br />
Note: Held down with 3/8" DIA. x 1 1/4" long carriage bolts<br />
with head grinded with two flats to fit in Bee Line B-72 Mini channel.<br />
High Flat Toolrest for 8" Grinder<br />
Baltic Birch 11/16" (18mm)<br />
1 of 1
2 21<br />
3<br />
Pre-drilled 13/64" to<br />
be tapped 1/4"-20.<br />
Made of 1/2" plywood<br />
1 5/8" x 1 3/8"<br />
R 3 8 " R 1 2 "<br />
4 " 1<br />
2 "<br />
32 " R 3 8 "<br />
3 1<br />
16 "<br />
1<br />
1 3 8 "<br />
2 "<br />
1<br />
4 "<br />
R 3 4 "<br />
7 1 4 "<br />
Ø 1 4 "<br />
R2 5 16 " 3 1<br />
R 5 32 "<br />
1 3 8 "<br />
1<br />
2 "<br />
R 1 4 "<br />
16 "<br />
R 1 8 "<br />
R1 11<br />
16 "<br />
R2"<br />
R 3 4 "<br />
NOTE: Try to make parts that are the same at the same time<br />
attached together to make both pieces identical to have a straight<br />
jig. (Like the two sides & two ends)<br />
Ø 1 4 " Ø1 1 8 "<br />
1 5 8 " 2 1 8 "<br />
Ø 1<br />
16 "<br />
15<br />
64 "<br />
15<br />
64 "<br />
11<br />
16 " 17<br />
32 "<br />
3<br />
4 " Ø 1 4 "<br />
1 1 2 "<br />
Note: This plywood piece is<br />
used to ensure that the flute is<br />
horizontal and it also protects<br />
it from the metal bolt.<br />
<strong>Jean</strong> Michel 1" = 1" 2001-11-25<br />
R 1 8 " Reg. Home Made Grinding <strong>Jig</strong><br />
<strong>Jig</strong> to grind bowl and spindle gouges.(dif. grinds)<br />
Baltic Birch Ply 1/2", 1/4", 3/4" nom. 1 of 1
Middle part is 1/2"<br />
3<br />
4 " R 3 8 "<br />
1 5<br />
plywood 1 5/8" x 7/8"<br />
8 "<br />
pre-drilled 13/64" to<br />
be tapped 1/4"-20.<br />
R 1 4 "<br />
Ø 1<br />
16 "<br />
15<br />
32 " Ø1 1 8 "<br />
Ø 1 2 1<br />
2 21<br />
32 " 4 " 8 "<br />
R 3 8 "<br />
15<br />
64 "<br />
7<br />
8 " 15<br />
15<br />
64 "<br />
64 "<br />
15<br />
15<br />
64 " 64 "<br />
1<br />
3<br />
4 " 1 1 8 " 4 "<br />
7 1 4 " 29<br />
64 " 5<br />
16 " R 7 16 "<br />
R 5 32 " Ø 1 4 " 7<br />
R2"<br />
Ø 1 8 " 4 "<br />
R1 11<br />
16 " 31<br />
R 5 32 "<br />
64 " 1 5 8 "<br />
Note: This plywood piece is<br />
used to ensure that the flute is<br />
horizontal and it also protects<br />
it from the metal bolt.<br />
NOTE: Try to make parts that are the same at the same time<br />
attached together to make both pieces identical to have a straight<br />
Short Home Made Grinding <strong>Jig</strong><br />
jig. (Like the two sides & two ends)<br />
<strong>Jean</strong> Michel 1" = 1" 2002-04-26<br />
This shorter <strong>Jig</strong> was made to be able to grind the bevel of shorter<br />
gouges. Gaining 3/4" and a little more space to let the handle come<br />
<strong>Jig</strong> to grind bowl and spindle gouges.(dif. grinds)<br />
R 1 8 " closer to the jig in the back.<br />
Baltic Birch Ply 1/2" and 1/4" nominal 1 of 1