Quality In Construction Equipment - Kelly Tractor
Quality In Construction Equipment - Kelly Tractor
Quality In Construction Equipment - Kelly Tractor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.kellytractor.com<br />
H25<br />
H35<br />
H45<br />
H55<br />
H65<br />
COMPATIBILITY CHART<br />
Model SSM1-E SM2-E SM4-E SM0-S SM1-S SM2-S SM3-S SM4-S SM5-S SM7-S SM9-S<br />
M1000<br />
M2000<br />
M3000<br />
M1000<br />
M2000<br />
M3000<br />
M2000<br />
M3000<br />
M1000<br />
M1000<br />
M2000<br />
M3000<br />
DF 16 REBAR TIER<br />
Acceptable Combination Not Recommended Do Not Use<br />
Binding tie wires has always been time consuming and exhausting - so far. Now it<br />
is possible to tie up to 1,000 knots per hour with Wacker Neuson’s new automatic<br />
rebar tying unit, and that continuously over longer periods of time. Not only does<br />
the wire binder steps up the working speed when compared to conventional<br />
methods for tying rebar with a pair of pliers, it also improves productivity thanks to<br />
the unit’s outstanding ergonomics. The operator can work in an upright and easy<br />
posture, the strain above all in wrist and fingers is reduced considerably. For using<br />
the DF 16 wire ties are needed.<br />
Rebar Tier / Rebar Cutter<br />
l Model Model L X L W X W HX L HX W L X X HW X Weight H Weight Weight Weight Tray Tray TrayTie Tray Tie wire wire<br />
Tying Tying Speed Speed<br />
Extended (in) Extended (in) Extended (in) lbs (in)(kg)<br />
lbs (kg) lbs (kg) lbs (kg)<br />
Material<br />
Knots Knots per per hr hr<br />
Rebar DF Tier 16 Tier DF Rebar 16 Rebar Tier 34.8 34.8 Tier x 4.7 x x 4.7 34.8 6.5x 6.5 x 34.8 4.7 x 6.5 4.7 4.9 x 6.5 (2.2) 4.9 (2.2) 4.9 (2.2) 4.9 77 ties (2.2) 77 ties per per strip 77 ties copper strip 77 copper per ties coated strip per coated strip wire wire 1,000 1,000<br />
REBAR CUTTER - Easy and efficient rebar cutting.<br />
Wacker Neuson’s rebar cutter series offers efficient and easy cutting and<br />
bending of reinforced steel bars. The cost per cut is lower when using<br />
electric-hydraulic equipment than it is when using alternative cutting<br />
techniques, plus the operator is not exposed to noise or flying sparks.<br />
These rebar cutters offer clean and quick cuts for applications with different<br />
rebar diameters bringing<br />
versatility and high<br />
productivity to any<br />
job site.<br />
Rebar <strong>Equipment</strong><br />
Model <strong>Equipment</strong> Size Operating Weight Hydraulic Cutting Force<br />
(L x W x H) (lbs) (tons)<br />
RCE-16 16.5 x 8.5 x 4.3 15.7 11<br />
RCE-20 16.5 x 9.1 x 4.3 22.0 14<br />
RCE-25 18.7 x 9.3 x 5.5 30.4 31<br />
RCP-12 20.1 x 9.8 x 7.1 14.8 7<br />
RCP-16 20.5 x 4.7 x 5.1 20.1 10<br />
RCP-20 15.2 x 9.4 x 7.1 30.2 30<br />
RCP-25 15.9 x 9.8 x 6.7 30.6 40<br />
RCP-32 22.0 x 132. x 7.1 59.5 50<br />
Sales: 305-592-0556 • Fax 305-463-6063 • Parts: 305-592-7763 Fax: 305-463-6066<br />
RCP 20<br />
6