Begin typing here…
Begin typing here…
Begin typing here…
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
How to Upgrade to a<br />
Management Server<br />
9. Disconnect the production machine from the network and connect the<br />
duplicate machine.<br />
10. Test your upgraded machine according to the instructions listed under<br />
Appendix E.<br />
11. If the duplicate machine will function as the production machine,<br />
go to step 15.<br />
12. If duplicate machine works as expected, backup the production machine.<br />
13. Upgrade the production machine:<br />
� Uninstall Check Point software.<br />
� Go over steps 2-10.<br />
14. Disconnect the duplicate machine; reconnect the production machine.<br />
15. Test your production machine according to Appendix E.<br />
16. Done.<br />
3.2. When the production machine Management Server software version<br />
is NG<br />
1. Run the PreUpgrade_Verifier tool on the production machine to detect<br />
potential problems that need to be addressed prior to upgrade. This is a read<br />
only tool with no effect on the database.<br />
2. Install the Check Point NG software on the duplicate machine. Take extra<br />
care to install the exact same FP (feature pack), hotfixes and products that are<br />
installed on the production server. Put the appropriate licenses on the duplicate<br />
machine.<br />
3. If your duplicate machine has a different IP/hostname or has a different OS,<br />
See Appendix A for different IP, and Appendix B for a different OS.<br />
4. Stop the Check Point software on both machines by executing the cpstop<br />
command.<br />
Check Point Software Technologies Ltd 9
Change language