150 Constant High Speed Direct Drive Spindles, Motors and Hand ...
150 Constant High Speed Direct Drive Spindles, Motors and Hand ...
150 Constant High Speed Direct Drive Spindles, Motors and Hand ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
25,000 - 90,000 RPM, < 1.04kW<br />
<strong>150</strong> <strong>Constant</strong> <strong>High</strong> <strong>Speed</strong> <strong>Direct</strong> <strong>Drive</strong><br />
<strong>Spindles</strong>, <strong>Motors</strong> <strong>and</strong> H<strong>and</strong> Tools<br />
SEF MECCANOTECNICA<br />
SEDE<br />
Via degli Orefici - Blocco 26<br />
40050 FUNO (BO) ITALIA<br />
Tel. 051 66.48.811<br />
Fax 051 86.30.59<br />
FILIALE DI MILANO<br />
Piazzale Martesana, 6<br />
20128 Milano<br />
Tel. 02 25.75.288<br />
Fax 02 25.70.121<br />
sef@sefmecc.itwww.sefmeccanotecnica.it<br />
FILIALE DI TORINO<br />
Via Druento, 34<br />
10148 Torino<br />
Tel. 011 65.08.239<br />
Fax 011 65.57.30
<strong>Constant</strong> <strong>High</strong> <strong>Speed</strong> <strong>and</strong> Torque, 25,000 - 65,000RPM < 1.04kW<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
700MX - Sealed Series with Hose Exhaust<br />
<strong>Speed</strong> RPM 40,000 50,000 65,000<br />
Mounting Area<br />
202HD<br />
210HD<br />
725JSL<br />
Power Rating kW 0.22 0.22 0.30<br />
Idle Air Consumption - CFM 4 4 4<br />
Idle Air Consumption - L/S 1.88 1.88 1.88<br />
Mounting Area<br />
30mm x 110mm<br />
0.31kg<br />
<strong>High</strong> Flow Filter<br />
Regulator Extractor<br />
Working Air Consumption - CFM 6 - 9<br />
Working Air Consumption - L/S 2.83 - 4.24<br />
TIR Collet Held Shank<br />
< 0.005mm<br />
Order #30008<br />
Max Shank Capacity ER8 or ER11<br />
3mm or 6mm<br />
702MX<br />
430MX<br />
<br />
<br />
<br />
<br />
202HD<br />
701MX<br />
<strong>Speed</strong> RPM 30,000 40,000 50,000 65,000<br />
Mounting Area<br />
<strong>Speed</strong> RPM 40,000 50,000 65,000<br />
Mounting Area<br />
Power Rating kW 0.30 0.34 0.37 0.41<br />
25mm x 60mm<br />
Power Rating kW 0.22 0.22 0.30<br />
25mm x 38mm<br />
Idle Air Consumption - CFM 10 13 14 14<br />
Idle Air Consumption - L/S 4.70 6.10 5.50 5.50<br />
Working Air Consumption - CFM 11 - 20<br />
Working Air Consumption - L/S 5.19 - 9.40<br />
Mounting Area<br />
0.41kg<br />
Idle Air Consumption - CFM 5 6 6<br />
Idle Air Consumption - L/S 2.36 2.83 2.83<br />
Working Air Consumption - CFM 7 - 10<br />
Working Air Consumption - L/S 3.30 - 4.72<br />
Mounting Area<br />
0.71kg<br />
TIR Collet Held Shank<br />
< 0.03mm<br />
TIR Collet Held Shank<br />
< 0.005mm<br />
Max Shank Capacity<br />
3mm<br />
Max Shank Capacity ER8 or ER11<br />
3mm or 6mm<br />
<br />
<br />
<br />
<br />
<br />
<br />
210HD<br />
704MX<br />
<strong>Speed</strong> RPM 25,000 30,000 40,000<br />
Mounting Area<br />
<strong>Speed</strong> RPM 40,000 50,000 65,000<br />
Mounting Area<br />
Power Rating kW 0.57 0.62 0.66<br />
Idle Air Consumption - CFM 13 14 14<br />
Idle Air Consumption - L/S 6.10 6.60 6.60<br />
Working Air Consumption - CFM 14 - 35<br />
Working Air Consumption - L/S 6.61 - 16.52<br />
Mounting Area<br />
25mm x 35mm<br />
0.91kg<br />
Power Rating kW 0.22 0.22 0.30<br />
Idle Air Consumption - CFM 5 6 6<br />
Idle Air Consumption - L/S 2.36 2.83 2.83<br />
Working Air Consumption - CFM 7 - 10<br />
Working Air Consumption - L/S 3.30 - 4.72<br />
Mounting Area<br />
40mm x 81mm<br />
0.54kg<br />
TIR Collet Held Shank<br />
< 0.03mm<br />
TIR Collet Held Shank<br />
< 0.005mm<br />
Max Shank Capacity<br />
6mm<br />
Max Shank Capacity ER8 or ER11<br />
3mm or 6mm<br />
<br />
<br />
<br />
<br />
<br />
<br />
430HD<br />
705MX<br />
<strong>Speed</strong> RPM 25,000 30,000 40,000<br />
Mounting Area<br />
<strong>Speed</strong> RPM 30,000 40,000 50,000<br />
Mounting Area<br />
Power Rating kW 0.57 0.62 0.66<br />
41mm x 60mm<br />
Power Rating kW 0.60 0.68 0.76<br />
40mm x 82mm<br />
Idle Air Consumption - CFM 13 14 14<br />
1.31kg<br />
Idle Air Consumption - CFM 16 20 20<br />
0.91kg<br />
Idle Air Consumption - L/S 6.10 6.60 6.60<br />
Working Air Consumption - CFM 14 - 35<br />
Working Air Consumption - L/S 6.61 - 16.52<br />
Mounting Area<br />
Idle Air Consumption - L/S 2.36 2.83 2.83<br />
Working Air Consumption - CFM 17 - 45<br />
Working Air Consumption - L/S 8.02 - 21.2<br />
Mounting Area<br />
TIR Collet Held Shank<br />
< 0.03mm<br />
TIR Collet Held Shank<br />
< 0.005mm<br />
Max Shank Capacity<br />
6mm<br />
Max Shank Capacity ER11<br />
6mm<br />
<br />
<br />
<br />
<br />
<br />
<br />
Do not use couplings/hoses less than 6mm internal diameter. With 210, 704 <strong>and</strong> 705 units use a minimum 9.5mm internal diameter coupling/hose.<br />
Always use a 3 micron filter <strong>and</strong>/or extractor where required <strong>and</strong> check specified L/S air flow. Use 6.2 Bar clean, dry, oil-free air only. Use eye protection<br />
<strong>and</strong> follow safety instructions. Supply is subject to Air Turbine Technology Inc, (ATT) distributor policies <strong>and</strong> upon terms contained in the ATT distributor agreement.<br />
Subject to availability, change of specifications, price <strong>and</strong> terms without notice. All specifications approximate. © 2011 Air Turbine Technology, Inc. All rights reserved.
<strong>Constant</strong> <strong>High</strong> <strong>Speed</strong> <strong>and</strong> Torque, 25,000 - 90,000RPM < 1.04kW<br />
<br />
www.airturbinetools.com<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
JS<br />
602JS Straight Shank (shown)<br />
602CAT/BT/DIN<br />
602CAT/BT/DIN w/TMA<br />
Governed 40,000 - 90,000 rpm, 0.15kW the compact 602 cuts faster<br />
with great accuracy.. Precise milling, engraving, drilling with small<br />
tools. Metal, composite, graphite or wood are cut with a finer surface<br />
finish. ER8 Collet. Filter/Extractor included. “X” Version with double<br />
power available.<br />
625CAT TMA Autochanger Option<br />
<strong>Speed</strong> RPM 40,000 50,000 65,000 90,000*<br />
Power Rating kW 0.11 0.15 0.15 0.15<br />
Working Air Consumption - CFM 5 - 6<br />
Working Air Consumption - L/S 2.36 - 3.30<br />
Manual NPT<br />
Block<br />
TIR Collet Held Shank<br />
< 0.005mm<br />
Max Shank Capacity ER8<br />
3mm<br />
*90,000 rpm suitable for diamond micro-endmills only.<br />
TMA<br />
625CAT/BT/DIN w/TMA (shown)<br />
625JS Straight Shank<br />
625CAT/BT/DIN<br />
<strong>Constant</strong> <strong>High</strong> <strong>Speed</strong> performance - 30,000 to 50,000 rpm - the<br />
0.34kW 625 with ER11 collet. Mold making, deburring, superfinishing,<br />
marking, robotics <strong>and</strong> more with more IPM’s <strong>and</strong> a cleaner finished<br />
surface. Cut down time <strong>and</strong> repair costs with low friction, high torque<br />
direct drive governed Air Turbine <strong>Spindles</strong>.<br />
For Auto-Toolchanger choose TMA manifold & block option.<br />
<strong>Speed</strong> RPM 30,000 40,000 50,000<br />
Power Rating kW 0.30 0.34 0.34<br />
Working Air Consumption - CFM 11 - 20<br />
Toolchanger Mounting Assembly<br />
Models (TMA = Block & Assembly) Part #<br />
602/602X - Universal TMA 36227<br />
625/625X - Universal TMA 36228<br />
650/650X - Universal TMA 36229<br />
Working Air Consumption - L/S 5.19 - 9.44<br />
TIR Collet Held Shank<br />
Max Shank Capacity ER11<br />
650CAT/BT/DIN (shown)<br />
650JS Straight Shank<br />
650CAT/BT/DIN w/TMA<br />
< 0.005mm<br />
6mm<br />
602/602X - Haas TMA 36218<br />
625/625X - Haas TMA 36219<br />
650/650X - Haas TMA 36220<br />
25,000, 30,000 or 40,000 rpm, 0.66kW - patented governed high<br />
speed under load. This powerful workhorse accelerates cutting<br />
action <strong>and</strong> does not burn up like geared speeders. Milling, routing,<br />
drilling, slotting - 5 micron T.I.R accuracy with an ER11, upgrade<br />
option to 2 micron. The 650 with double front ceramic bearings is<br />
reliable in long duration production cycles. 50 spindle models<br />
available. CAT, BT, DIN, HSK, etc. toolholders available.<br />
Mazak, Hurco, Fadal <strong>and</strong> other blocks available<br />
Installation Kit Available: Includes Solonoid, 25ft<br />
Hose, <strong>and</strong> Couplings.<br />
<strong>Speed</strong> RPM 25,000 30,000 40,000<br />
Power Rating kW 0.57 0.62 0.66<br />
Working Air Consumption - CFM 14 - 35<br />
Working Air Consumption - L/S 6.61 - 16.52<br />
TIR Collet Held Shank<br />
< 0.005mm<br />
A certificate stating T.I.R. inside<br />
collet, at collet extension 3x<br />
collet I.D. <strong>and</strong> vertical alignment<br />
accompanies every spindle.<br />
Max Shank Capacity ER11<br />
6mm<br />
Do not use couplings/hoses less than 6mm internal diameter. With 625X, 650 <strong>and</strong> 650X units use a minimum 9.5mm internal diameter coupling/hose.<br />
Always use a 3 micron filter <strong>and</strong>/or extractor where required <strong>and</strong> check specified L/S air flow. Use 6.2 Bar clean, dry, oil-free air only. Use eye protection<br />
<strong>and</strong> follow safety instructions. Supply is subject to Air Turbine Technology Inc, (ATT) distributor policies <strong>and</strong> upon terms contained in the ATT distributor agreement.<br />
Subject to availability, change of specifications, price <strong>and</strong> terms without notice. All specifications approximate. © 2011 Air Turbine Technology, Inc. All rights reserved.
<strong>Constant</strong> <strong>High</strong> <strong>Speed</strong> <strong>and</strong> Torque, 25,000 - 90,000RPM < 1.04kW<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Light <strong>and</strong> Powerful Tools<br />
201SV w/brake<br />
Powerful <strong>and</strong> Durable<br />
202SV w/brake<br />
Intricate Work - No Stress<br />
0145SSV<br />
0.17kg<br />
0.23kg<br />
0.17kg<br />
The 201SV “pencil” style precision tools are an incredible<br />
combination of light weight <strong>and</strong> high power. Designed<br />
with a slim shaft for the closest possible access even in<br />
hard-to-reach areas while giving great precision <strong>and</strong><br />
comfort. Governed speeds available are 40,000, 50,000,<br />
65,000 or 90,000 RPM. Patented Automatic Brake.<br />
The popular 202SV series has a larger turbine <strong>and</strong><br />
bearing size with the same slim light pencil design as<br />
the 201. Power from the bigger diameter turbine is up to<br />
0.41kW for heavier material removal with heavier duty<br />
bearings. <strong>Speed</strong> does the cutting with vibration at just<br />
1.0mm/s2. End “white finger” with Air Turbine Tools®.<br />
This well balanced, low vibration 0145SSV tool is ideal.<br />
For polishing at 40,000 rpm or marking or deburring at<br />
65,000, this tool is comfortable <strong>and</strong> exact. The motor is<br />
in the head - another patented feature. There are no<br />
gears. Precise <strong>and</strong> with low vibration. No maintenance<br />
or lubrication - ever. Many optional collets, including<br />
3mm. 90° version available.<br />
<strong>Speed</strong> RPM 40,000 50,000 65,000 90,000<br />
Power Rating kW 0.11 0.15 0.15 0.15<br />
<strong>Speed</strong> RPM 30,000 40,000 50,000 65,000<br />
Power Rating kW 0.30 0.34 0.37 0.41<br />
<strong>Speed</strong> RPM 40,000 50,000 65,000<br />
Power Rating kW 0.11 0.15 0.15<br />
Working Air<br />
Consumption - CFM<br />
4 - 7<br />
Working Air<br />
Consumption - CFM<br />
11 - 20<br />
Working Air<br />
Consumption - CFM<br />
4 - 7<br />
Working Air<br />
Consumption - L/S<br />
2.22 - 3.30<br />
Working Air<br />
Consumption - L/S<br />
5.19 - 9.44<br />
Working Air<br />
Consumption - L/S<br />
2.22 - 3.30<br />
TIR Collet Held Shank<br />
< 0.03mm<br />
TIR Collet Held Shank<br />
< 0.03mm<br />
TIR Collet Held Shank<br />
< 0.03mm<br />
Max Shank Capacity<br />
3mm<br />
Max Shank Capacity<br />
3mm<br />
Max Shank Capacity<br />
3mm<br />
“<strong>Speed</strong> Does the Cutting”<br />
525SV w/brake<br />
Unstoppable Power<br />
230SV w/brake<br />
230DM w/brake<br />
Superfine Finishing<br />
2545SVF<br />
2545DM<br />
2545SVF<br />
0.41kg<br />
1.06kg<br />
1.06kg<br />
0.51kg<br />
525SV<br />
230SV<br />
230DM<br />
2545DM<br />
0.57kg<br />
Finishing or trimming metal? Deburring aluminum or<br />
steel? The light, powerful <strong>and</strong> comfortable 525 Series<br />
“pencil” style tools have speed ranges of 30,000 <strong>and</strong><br />
40,000 RPM, with 6mm collet. The slim barrel styling<br />
provides easy access for hard-to-reach areas. Patented<br />
brake stops tool in seconds. oil free.<br />
Almost silent, this light tool shows the power <strong>and</strong><br />
superiority of the governed turbine. The 230 Series tools<br />
incorporate heavy duty bearings. For use in heavy-duty<br />
applications where hard use is expected. No gears or<br />
vanes to vibrate or repair. Route or finish at 40,000 rpm<br />
with 0.88HP with vibration at just 1.1mm/s2. Use 9mm<br />
hoses <strong>and</strong> couplings.<br />
The 2545 Series tools have a head angled at 45°<br />
for comfort <strong>and</strong> easy access. The 2545 Series tools<br />
can perform tasks such as grinding, deburring <strong>and</strong><br />
polishing. Only a light h<strong>and</strong> needed to guide the tool.<br />
These tools have no gears. Result - a lighter tool with<br />
greater reliability! Front or rear exhaust, slide valve or<br />
trigger control. 90° version available.<br />
<strong>Speed</strong> RPM 30,000 40,000<br />
Power Rating kW 0.30 0.34<br />
<strong>Speed</strong> RPM 25,000 30,000 40,000<br />
Power Rating kW 0.57 0.62 0.66<br />
<strong>Speed</strong> RPM 30,000 40,000<br />
Power Rating kW 0.30 0.34<br />
Working Air<br />
Consumption - CFM<br />
11 - 20<br />
Working Air<br />
Consumption - CFM<br />
14 - 35<br />
Working Air<br />
Consumption - CFM<br />
11 - 20<br />
Working Air<br />
Consumption - L/S<br />
5.19 - 9.27<br />
Working Air<br />
Consumption - L/S<br />
6.61 - 16.52<br />
Working Air<br />
Consumption - L/S<br />
5.19 - 9.44<br />
TIR Collet Held Shank<br />
< 0.03mm<br />
TIR Collet Held Shank<br />
< 0.03mm<br />
TIR Collet Held Shank<br />
< 0.03mm<br />
Max Shank Capacity<br />
6mm<br />
Max Shank Capacity<br />
6mm<br />
Max Shank Capacity<br />
6mm<br />
Do not use couplings/hoses less than 6mm internal diameter. With 230 <strong>and</strong> 525X units use a minimum 9.5mm internal diameter coupling/hose.<br />
Always use a 3 micron filter <strong>and</strong>/or extractor where required <strong>and</strong> check specified L/S air flow. Use 6.2 Bar clean, dry, oil-free air only. Use eye protection<br />
<strong>and</strong> follow safety instructions. Supply is subject to Air Turbine Technology Inc, (ATT) distributor policies <strong>and</strong> upon terms contained in the ATT distributor agreement.<br />
Subject to availability, change of specifications, price <strong>and</strong> terms without notice. All specifications approximate. © 2011 Air Turbine Technology, Inc. All rights reserved.
Change language