Lights - Unit One

Strobe controllers.
The strobe control unit is microprocessor based
and specially designed to control all types of
LATAB-light heads.
The controller is designed for “P&P” (plug and
play). Just connect the LATAB light head and the
controller automatically identifies the light type
and give the lamp head maximum light intensity.
Strobe pulse is adjustable in 16 steps.
It is possible to adjust light intensity.
Increasing of light intensity to 200% at
50 and 100 µsec strobe by inside jumper.
General specifications.
Supply voltage 24V DC +- 10%, max 2.5A
Power output Max 8A /24A
Light intensity
Strobe pulse
Trigg input
Trigg frequency
Operation temp
0-100% internal potentiometer
50 to 1500 µsec in 16 steps
5 to 24 V, optically isolated
Normaly max 200 Hz
0-65°C
Housed in black aluminium box.
CE-approved/RoHS compliant.
Supplied with 5 meter power/trigger cable.
Art. no
Control system
Intensity
Output
Amps
No of
channels
Fig no
Remarks
PAD1 1131/8 Internal potentiometer 8 1 1
PAD1 1131/24 Internal potentiometer 24 1 2
PAD1 1141/8 0-10V 8 1 1
PAD1 1231/8 Internal potentiometer 8/ch 2 3
PAD1 1431/8 Internal potentiometer 8/ch 4 4
PAD1 1132/8 RS232 8 1 1 Trig delay 0 to 48 msec
PAD1 1132/24 RS232 24 1 2 Trig delay 0 to 48 msec
PAD1 1432/8 RS232 8/ch 4 4 Trig delay 0 to 48 msec
PAD1 4132/8 Ethernet 8 1 5 Trig delay 0 to 48 msec
PAD1 4132/24 Ethernet 24 1 6 Trig delay 0 to 48 msec
PAD1 4232/8 Ethernet 8/ch 2 7 Trig delay 0 to 48 msec
PAD1 4432/8 Ethernet 8/ch 4 8 Trig delay 0 to 48 msec
Copyright © 2010 LAT elektronik AB • www.latab.se
Member of the Polytec organization
LAT elektronik AB
Krossgatan 18
SE-162 50 Vällingby
Sweden
Phone +46 8704 9225 • e-mail: info@latab.se
28