Lights - Unit One

Options
Cables - light head
Description
As standard LATAB light heads are supplied with one meter cable.
Other types and lengths of cables can be ordered.
For other length add /XX to the article number.
For extra flexible cable (robot cable) add ”R”
Extension cables
Description
Two different kind of extension cables between the light head connector
and the controller are available.
One for steady state controllers (LKP1 XXXX) and
one for strobe controllers (LKS1 XXXX).
XXXX describe the length in mm.
DIN-clips
Description
As an option DIN-clips are available for all control units.
Two clips are mounted on the back cover of the controller.
Just place on the DIN-rail and push for fastening.
The clips are made of rugged glass filled, black nylon.
Brackets
Description
Many of LATAB light heads have a bracket as standard.
As an option it is possible to order different kind of brackets.
SXX4 72YY extension brackets
Description
For PXX4 72YY brackets for extended wide are available.
These brackets are straight. Ordinary brackets fit the holders.
Polarization filter
Description
Some ring lights have polarization filters as an option.
Other filters on demand.
Order information
Examples:
SAH3 1012/5 = supplied with 5 m cable
SAH3 1012/05 = supplied with 0,5 m cable
SAH3 1012/R3 = supplied with 3 m flexible
cable
Order information
Examples:
LKP1 3000 = 3 m extension cable for steady
state controllers.
LKS1 5000 = 5 m extension cable for strobe
controllers.
Order information
/D add to the article number
Example: PAD1 1131/8/D
Order information
See “Options Brackets”
Order information
/B290 add to the article number for other widths
of 130-290 mm.
Order information
See “Options Polarization filters”
Copyright © 2010 LAT elektronik AB • www.latab.se
Member of the Polytec organization
LAT elektronik AB
Krossgatan 18
SE-162 50 Vällingby
Sweden
Phone +46 8704 9225 • e-mail: info@latab.se
38