the 200 v,f and p - Kakkis Agrifuture Products LTD
the 200 v,f and p - Kakkis Agrifuture Products LTD
the 200 v,f and p - Kakkis Agrifuture Products LTD
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The optimum PTO speed for every implement<br />
COMFORT CONTROLS FOR<br />
MORE EFFICIENCY<br />
The specialty tractors are fitted with max.<br />
3 PTO speeds, 540/750 <strong>and</strong> 1000 rpm at <strong>the</strong> rear<br />
<strong>and</strong> 1000 rpm at <strong>the</strong> front. All PTO speeds are<br />
taken off one stub, thus eliminating time-consuming<br />
changes of stub axle or drive shaft. Comfort<br />
controls for <strong>the</strong> front <strong>and</strong> rear PTO‘s provide maximum<br />
operating comfort.<br />
3 PTO speeds<br />
A 1000 rpm PTO is available for implements<br />
with a high power requirement<br />
<strong>and</strong> 540 rpm <strong>and</strong> 750 rpm (economy<br />
PTO) speeds for <strong>the</strong> widely-used<br />
540 rpm implements.<br />
Front <strong>and</strong> rear PTO comfort controls<br />
The PTO‘s in <strong>the</strong> Farmer <strong>200</strong> can be<br />
activated electro-hydraulically with<br />
<strong>the</strong> touch of a button. The buttons<br />
are conveniently located next to <strong>the</strong><br />
EPC controls, which allows <strong>the</strong> driver<br />
to activate <strong>the</strong> power lift <strong>and</strong> PTO‘s<br />
toge<strong>the</strong>r at <strong>the</strong> headl<strong>and</strong> without having<br />
to change grips.<br />
750 rpm economy PTO<br />
The 750 rpm speed is especially practical<br />
because it allows 540 rpm implements<br />
that don‘t require full engine<br />
power to be driven at 75% of <strong>the</strong> engine<br />
speed, which reduces fuel consumption<br />
(economy PTO). This technology allows<br />
<strong>the</strong> engine to run quietly <strong>and</strong> economically,<br />
especially when mulching or<br />
spraying, because <strong>the</strong> engine is working<br />
in <strong>the</strong> partial load range.<br />
19