RibbonFlex Pro™ LED Tape Lighting - Lee Valley Tools
RibbonFlex Pro™ LED Tape Lighting - Lee Valley Tools
RibbonFlex Pro™ LED Tape Lighting - Lee Valley Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>RibbonFlex</strong> Pro <strong>LED</strong> <strong>Tape</strong> <strong>Lighting</strong><br />
<strong>RibbonFlex</strong> Pro <strong>LED</strong> <strong>Tape</strong> <strong>Lighting</strong><br />
We’ve been looking at <strong>LED</strong> lighting<br />
systems for a few years and none have<br />
met our quality and ease-of-use criteria<br />
– until now. This well-made system has<br />
the best color consistency and uniformity<br />
of any <strong>LED</strong> lighting we have tested. It is<br />
also straightforward to connect and<br />
install, requiring no special skills or tools.<br />
Suitable for both accent and task lighting,<br />
it lets you add lighting exactly where you<br />
want it. The <strong>LED</strong> tape is thin and narrow,<br />
has a peel-and-stick backing for easy<br />
mounting, and can be cut to length using<br />
ordinary scissors. System connections<br />
are made without soldering, using quickconnectors.<br />
Since the system uses 12<br />
volts (after the power supply), it is safe to<br />
handle and more energy efficient than<br />
conventional lighting. A well-designed<br />
system, it’s as close to plug-and-play as<br />
you can achieve with custom lighting. All<br />
components are CSA, cETL or cUL listed.<br />
Easy to Install<br />
Cut to Size – Cut to length<br />
with scissors.<br />
Connect with Ease – Use<br />
quick-connectors to join strips<br />
and power wires.<br />
Peel and Stick – The 3M<br />
adhesive backing lets you stick<br />
the tape to virtually any clean,<br />
smooth surface.<br />
• Ultra thin and flexible – low profile enables mounting in compact spaces<br />
• Long-life Everlight <strong>LED</strong>s – operate using less energy than traditional<br />
lights, and generate little heat<br />
• Outstanding light output, high color accuracy and color consistency<br />
• No damaging ultraviolet/infrared (UV/IR) radiation<br />
• Wide 120° beam angle and smooth, even light distribution<br />
• 12V DC operation – low voltage, safe and shock-free<br />
• Wide range of components, switches, dimmers and controllers<br />
• An excellent retrofit lighting option for RVs and boats<br />
Easy to Configure – The simplest set-up using white <strong>LED</strong>s needs only:<br />
A light strip<br />
plus<br />
A 12V power supply<br />
Works where other lighting simply can’t
White <strong>LED</strong> Lights<br />
An excellent way to add accent lighting in a cove,<br />
recess or under a shelf, valance or kick plate; it<br />
can even be used as task lighting with higher<br />
density (more <strong>LED</strong>s per metre) tape lighting.<br />
STEP 1: Select a Light Density<br />
30 White <strong>LED</strong>s per metre (9 <strong>LED</strong>s per foot)<br />
60 White <strong>LED</strong>s per metre (18 <strong>LED</strong>s per foot)<br />
120 White <strong>LED</strong>s per metre (36 <strong>LED</strong>s per foot)<br />
Warm White <strong>LED</strong> <strong>Tape</strong> Light Kits<br />
While all our tape lighting strips and connectors are<br />
available separately to let you order exactly what you<br />
want, the best value is with these tape kits, since they<br />
are pre-assembled economically at the factory and<br />
come with connectors for joining additional lengths<br />
of tape. Each kit supplies 8И (2.5m) of tape light, presoldered<br />
with a 48Й wire lead for connection to a<br />
power supply, a splice connector for in-line strip-tostrip<br />
connections, a wire-lead connector to extend<br />
two sections around corners, plus two wire support<br />
clips and installation instructions. To join multiple<br />
kits, cut the pre-soldered 48Й wire lead from any tape<br />
being linked to the first and use the included splice<br />
connector to create a continuous run of lighting.<br />
The light strips are backed with a high-tack peeland-stick<br />
adhesive, and can be cut to length<br />
(every 4Й for the 30 <strong>LED</strong>/m, 2Й for 60 <strong>LED</strong>/m and<br />
1Й for the 120 <strong>LED</strong>/m). All produce a warm white<br />
STEP 2: Select a Low-Voltage Power Supply<br />
21/4Й<br />
6 watt<br />
15 watt<br />
30 watt<br />
4Й<br />
60 watt<br />
light (about 3000K color temperature) and require a<br />
12V power supply with enough wattage to suit the<br />
application. While not required, a dimmer is available<br />
separately. 1+ 3+<br />
00U41.01 8И (2.5m), 30 <strong>LED</strong>/m Kit $24.90 $22.40<br />
00U41.04 8И (2.5m), 60 <strong>LED</strong>/m Kit $38.50 $34.65<br />
00U41.07 8И (2.5m), 120 <strong>LED</strong>/m Kit $67.50 $60.75<br />
* Based on full-power brightness, the lengths<br />
shown are totals for <strong>LED</strong> tape lighting; do not<br />
include connecting wires in your calculations.<br />
Maximum White <strong>LED</strong> <strong>Tape</strong> Lengths*<br />
<strong>LED</strong><br />
Density<br />
(<strong>LED</strong>s/m)<br />
6 Watt<br />
00U41.81<br />
$14.95<br />
15 Watt<br />
00U41.82<br />
$21.50<br />
30 Watt<br />
00U41.83<br />
$26.50<br />
Straight run: powered at one end 30 7И (2.1m) 24И (7.3m) 48И (14.6m)<br />
Power<br />
Supply<br />
<strong>LED</strong>s shown actual size<br />
Center-feed/Loop-back: powered from center or<br />
from both ends<br />
Power<br />
Supply<br />
2Й<br />
1Й<br />
Warm White <strong>LED</strong> <strong>Tape</strong> Light by the Foot<br />
If you don’t want to use a kit, the tape is available by the<br />
foot, but you will need to buy wiring and connectors separately.<br />
By-the-foot lighting is an economical option when<br />
adding a short length of lighting to a kit. For example, if<br />
you need 10И of lighting, instead of buying two 8И kits, order<br />
one 8И kit plus another 2И of lighting and use a splice<br />
connector to join the light strips. 1+ 10+ 25+<br />
00U41.02 1И (30cm), 30 <strong>LED</strong>/m, ea. $3.45 $3.10 $2.80<br />
00U41.05 1И (30cm), 60 <strong>LED</strong>/m, ea. $5.35 $4.80 $4.35<br />
00U41.08 1И (30cm), 120 <strong>LED</strong>/m, ea. $9.35 $8.40 $7.60<br />
How To Get Started<br />
For the most basic set-ups, you just need an <strong>LED</strong><br />
lighting kit in the desired density and a power<br />
supply. You may wish to add a dimmer.<br />
Power<br />
Supply<br />
Well suited for decorative lighting such as above cabinets,<br />
in coves or on tray ceilings, where ambience is the primary<br />
purpose of the lighting.<br />
A good all-around solution for accent lighting and lower brightness<br />
task lighting such as under cabinets and in toe-kick areas.<br />
Its greater <strong>LED</strong> density provides brighter illumination and a more<br />
seamless glow.<br />
Provides a brightness level suitable for task lighting. Also useful<br />
for accent lighting to be installed very close to an adjacent surface,<br />
since the high <strong>LED</strong> density provides the most seamless illumination<br />
(no hot spots).<br />
Each kit contains:<br />
8И tape light with 48Й wire lead,<br />
splice, wire lead connector<br />
plus two wire supports.<br />
Each low-voltage power supply comes pre-wired with a 60Й (1.5m) AC cord with plug end for use in a standard 120V outlet.<br />
The 12V output is equipped with a color coded red/black wire connected to a removable terminal block for connection to<br />
your <strong>LED</strong> tape lights. Choosing a power supply is determined by the length of tape lighting being used,<br />
its <strong>LED</strong> density and how the lighting will be configured.<br />
A straight-run layout (using single or multiple strips in series) powers only one end of the <strong>LED</strong> strip.<br />
For longer runs of tape, center-feed or loop-back layouts reduce the effects of voltage drop, producing<br />
more consistent brightness and color over the length of the strip. A center-feed layout powers two equal<br />
legs of tape lighting from a central position; a loop-back layout powers both ends of the <strong>LED</strong> tape simultaneously<br />
(e.g., for room perimeter cove lighting). For array layouts, where several unequal lengths of<br />
tape are to be powered from the same supply, consult the power supply chart on our website.<br />
60 3.3И (1m) 10.5И (3.2m) 24И (7.3m)<br />
120 <strong>LED</strong>/m kit<br />
shown.<br />
60 Watt<br />
00U41.84<br />
$42.50<br />
120 1.6И (0.5m) 4.9И (1.5m) 13.1И (4m) 16.4И (5m)<br />
30 18И (5.5m) 46И (14m) 96И (29.2m)<br />
60 9И (2.75m) 20И (6m) 48И (14.6m)<br />
120 9.85И (3m) 26.2И (8m)
Manual<br />
dimmer<br />
Touchpad dimmer<br />
Need a Dimmer?<br />
<strong>LED</strong> Dimmer Switch<br />
To let you fully control the light intensity, you may<br />
wish to add a dimmer to your <strong>LED</strong> lighting. Wired<br />
between the power supply and white <strong>LED</strong> tape<br />
lighting, this dimmer has a rotary knob to manually<br />
adjust the light intensity from 0 to 100%. It can be<br />
surface mounted using screws or installed in a standard<br />
switch box (not supplied) recessed into a wall,<br />
useful where the power supply and wiring to the<br />
<strong>LED</strong> lighting are to be hidden within a wall.<br />
Project Examples<br />
To help you visualize what you might need for<br />
your specific project, we’ve developed a few<br />
custom lighting scenarios.<br />
Note: For any of these scenarios,<br />
consider adding a dimmer<br />
Scenario One<br />
Shelf <strong>Lighting</strong><br />
3’×5’ wide shelves<br />
Warm White:<br />
Using 30 <strong>LED</strong>/m white tape: $78.10<br />
• 2 К 00U41.01 kit, 30 <strong>LED</strong>/m – 8И (2.5m) white<br />
• 1 К 00U41.82 15W power supply<br />
• 1 К 00U41.36 flat ribbon wire, 26.2И (8m) 22 ga.<br />
Layout configuration: straight run<br />
Power<br />
Supply<br />
Color:<br />
Using 30 <strong>LED</strong>/m RGB tape: $154.90<br />
• 2 К 00U41.51 kit, 30 <strong>LED</strong>/m – 8И (2.5m) RGB<br />
• 1 К 00U41.96 custom color controller/light mixer<br />
• 1 К 00U41.83 30W power supply<br />
• 1 К 00U41.66 fl at ribbon wire, 26.2И (8m) 22 ga.<br />
Layout configuration: straight run<br />
When mounting under a cabinet or shelf with no lip to hide the<br />
light strip, create a visual barrier by using trim strip molding<br />
mounted in front of the light strip.<br />
3' 2'<br />
<strong>Tape</strong><br />
light strip<br />
5'<br />
5'<br />
The dimmer is also available in a version with a<br />
wireless touchpad wall switch for remote operation<br />
from up to 100И away. The touchpad, with<br />
increment, decrement and on/off buttons,<br />
recesses into a hole cut into a wall or cabinet and<br />
is secured using adhesive (not supplied). The<br />
touchpad operates using an included type 23A<br />
(12V) battery. Each wireless dimmer is available<br />
preprogrammed to operate on either a unique or<br />
like channel. Dimmers using unique channels<br />
allow you to independently dim lighting in separate<br />
areas of the same building. Dimmers using<br />
like channels let you simultaneously dim lighting<br />
in multiple areas using the same<br />
wireless keypads. As such, if you<br />
want to operate several dimmers<br />
in an area simultaneously, order<br />
dimmers that are channelled<br />
alike. For separate zone lighting<br />
control, order dimmers with<br />
unique channels.<br />
Touchpad can<br />
be recessed into<br />
a hole cut into a<br />
wall or cabinet.<br />
00U41.93 Manual $21.50<br />
00U41.91 w/Touchpad, Unique Channel $34.50<br />
00U41.92 w/Touchpad, Channelled Alike $34.50<br />
Did you know?<br />
<strong>LED</strong> lighting strips can be<br />
used in the interior of a boat<br />
or RV. Durable and energy<br />
efficient, the strip’s narrow<br />
profile lets it fit where other lighting won’t. Instead<br />
of using an AC to DC power adapter, you simply<br />
connect the wiring to a 12V battery source.<br />
Scenario Two<br />
Under-Cabinet <strong>Lighting</strong><br />
12’ Galley Kitchen<br />
Warm White:<br />
Using 120 <strong>LED</strong>/m white tape: $138.20<br />
• 1 К 00U41.07 kit, 120 <strong>LED</strong>/m – 8И (2.5m) white<br />
• 4 К 00U41.08 1И (30cm), 120 <strong>LED</strong>/m (sold by the foot)<br />
• 1 К 00U41.83 30W power supply<br />
• 1 К 00U41.36 fl at ribbon wire, 26.2И (8m) 22 ga.<br />
Layout configuration: simple straight run<br />
Power<br />
Supply<br />
Color:<br />
Using 60 <strong>LED</strong>/m RGB tape: $181.40<br />
• 1 К 00U41.54 kit, 60 <strong>LED</strong>/m – 8И (2.5m) RGB<br />
• 4 К 00U41.55 1И (30cm), 60 <strong>LED</strong>/m (sold by the foot)<br />
• 1 К 00U41.96 custom color controller/light mixer<br />
• 1 К 00U41.84 60W power supply<br />
• 1 К 00U41.66 fl at ribbon wire, 26.2И (8m) 22 ga.<br />
Layout configuration: simple straight run<br />
Connections Legend<br />
6'<br />
Splice<br />
Mounting too<br />
close to lip<br />
may create<br />
an undesired<br />
shadow.<br />
Wire lead<br />
to wire<br />
2'<br />
When planning an installation, keep in<br />
mind that in addition to the 8И kits, you<br />
can always buy extra lengths of lighting<br />
by the foot. For example, if you need<br />
10И of lighting, instead of buying two<br />
8Иkits with more lighting than you need,<br />
just order an 8И kit plus another 2И of<br />
lighting; a splice connector can be used<br />
to join the light lengths for a continuous<br />
run of lighting.<br />
4'<br />
Splice connector<br />
<strong>RibbonFlex</strong><br />
Pro has a<br />
wide 120°<br />
beam<br />
angle.
RGB <strong>LED</strong> Lights<br />
With red, green and blue <strong>LED</strong> chipsets, these light<br />
strips are used with a color controller to produce<br />
a near endless array of colors (plus variations of<br />
white), making them exceptionally versatile for<br />
creative lighting.<br />
STEP 1: Select a Light Density<br />
30 RGB (Color) <strong>LED</strong>s per metre (9 <strong>LED</strong>s per foot)<br />
<strong>LED</strong>s shown actual size<br />
How To Get Started<br />
For the most basic set-ups, you just need an RGB<br />
<strong>LED</strong> lighting kit in the desired density, a color<br />
controller and a power supply.<br />
A good choice for indirect accent lighting.<br />
60 RGB (Color) <strong>LED</strong>s per metre (18 <strong>LED</strong>s per foot)<br />
RGB (Color) <strong>LED</strong> <strong>Tape</strong> Light Kits<br />
While all our tape lighting strips and connectors are<br />
available separately to let you order exactly what<br />
you want, the best value is with these tape kits,<br />
since they are pre-assembled economically at the<br />
factory and come with connectors for joining additional<br />
lengths of tape. Each kit supplies 8И (2.5m) of<br />
tape light, pre-soldered with a 48Й wire lead for<br />
connection to a power supply, a splice connector<br />
for in-line strip-to-strip connections, a wire-lead<br />
connector to extend two sections around corners,<br />
plus two wire support clips and installation instructions.<br />
To join multiple kits, cut the pre-soldered 48Й<br />
wire lead from any tape being linked to the first and<br />
use the included splice connector to create a<br />
continuous run of lighting. Each light strip is<br />
backed with a high-tack peel-and-stick adhesive,<br />
and can be cut to length (every 4Й for the 30 <strong>LED</strong>/m<br />
and 2Й for 60 <strong>LED</strong>/m). All RGB tape lighting requires<br />
a color controller for blending the red, green and blue<br />
<strong>LED</strong>s into a custom color. A 12V power supply with<br />
enough wattage to suit the application is also<br />
required. 1+ 3+<br />
00U41.51 8И (2.5m), 30<strong>LED</strong>/m Kit $48.50 $43.65<br />
00U41.54 8И (2.5m), 60 <strong>LED</strong>/m Kit $69.50 $62.55<br />
RGB <strong>LED</strong> <strong>Tape</strong> Light by the Foot<br />
If you don’t want to use a kit, the tape is available by the<br />
foot, but you will need to buy wiring and connectors separately.<br />
By-the-foot lighting is an economical option when<br />
adding a short length of lighting to a kit. For example, if<br />
you need 10И of lighting, instead of buying two 8И kits, order<br />
one 8И kit plus another 2И of lighting and use a splice<br />
connector to join the light strips. 1+ 10+ 25+<br />
00U41.52 1И (30cm), 30 <strong>LED</strong>/m, ea. $6.70 $6.00 $5.45<br />
00U41.55 1И (30cm), 60 <strong>LED</strong>/m, ea. $9.50 $8.55 $7.70<br />
STEP 2: Select a Color Controller<br />
Touchpad can<br />
be recessed into a hole<br />
cut into a wall or cabinet.<br />
The custom color controller/light mixer<br />
allows for a near-endless range of<br />
static colors and brightness levels.<br />
Custom color<br />
controller/light mixer<br />
25-color wireless controller<br />
Below: just a small sampling of colors that can be produced with the color controllers.<br />
4Й<br />
2Й<br />
Provides brighter illumination and a more seamless output<br />
(given the greater density of <strong>LED</strong>s). Can also be used for<br />
lower-brightness task lighting when set to white.<br />
60 <strong>LED</strong>/m kit<br />
shown.<br />
Each kit contains:<br />
8И tape light with 48Й wire<br />
lead, splice, wire lead connector<br />
plus two wire supports.<br />
RGB Color Controllers<br />
All RGB <strong>LED</strong> tape lighting requires a color controller to blend the red, green and blue<br />
<strong>LED</strong>s into a custom color. Two models are available.<br />
The custom color controller/light mixer allows for a near-endless range of static<br />
colors and brightness levels. A separate dial controls the intensity of each color for<br />
precise control over the color mix. It can also be set to output white light. It is an<br />
excellent choice for anyone wanting to create a specific color.<br />
The 25-color wireless controller, with remote touchpad, controls the lighting from<br />
up to 100И away. It has an on/off switch and buttons to cycle through or dim the preprogrammed<br />
static colors, which also include variations of white. Additionally, it has<br />
nine pre-programmed settings, with speed control, that control dynamic color<br />
changing effects. The touchpad, which operates using an included type 23A (12V)<br />
battery, can be recessed into a hole cut into a wall or cabinet and secured using adhesive<br />
(not supplied). The wireless controller comes pre-paired with a remote touchpad<br />
to operate on either a unique or like channel. Controllers using unique channels allow<br />
you to independently operate lights in separate areas of the same building. Controllers<br />
using like channels let you simultaneously operate* lights in multiple areas using the<br />
same wireless keypads. As such, if you want to operate several controllers in an area<br />
simultaneously, order controllers that are channelled alike. For separate zone lighting<br />
control, order controllers with unique channels.<br />
00U41.96 Custom Color Controller/Light Mixer $18.50<br />
00U41.94 25-Color Wireless Controller, Unique Channel $42.50<br />
00U41.95 25-Color Wireless Controller, Channelled Alike $42.50<br />
*When multiple RGB controllers are operated using<br />
channelled alike wireless touchpads, note that only static<br />
colors can be controlled or synchronized. Dynamic<br />
color changing effects will not operate in synchronicity.
Project Example<br />
RGB lighting strips can be used anywhere standard white<br />
light can be used. Fully dimmable to let you control its<br />
intensity, it is an excellent choice for soft accent lighting.<br />
Colored back-lighting Flat-Panel TV<br />
Using 30 <strong>LED</strong>/m RGB for ambient illumination: $97.30<br />
40Й fl at-panel TV using 30 <strong>LED</strong>/m RGB for ambient illumination<br />
• 1 К 00U41.51 kit, 30 <strong>LED</strong>/m – 8И (2.5m) RGB<br />
• 1 К 00U41.96 custom color controller/light mixer<br />
• 1 К 00U41.83 30W power supply<br />
• 2 К 00U41.61 RGB wire lead connector<br />
Layout configuration:<br />
Straight run<br />
Power<br />
Supply<br />
STEP 3: Select a Low-Voltage Power Supply<br />
Each low-voltage power supply comes pre-wired with a 60Й (1.5m) AC cord with plug end for use in a standard<br />
120V outlet. The 12V output is equipped with a color coded red/black wire connected to a removable terminal<br />
block for connection to your <strong>LED</strong> tape lights. Choosing a power supply is determined by the length of tape<br />
lighting being used, its <strong>LED</strong> density and how the lighting will be configured. For RGB tape, a straight-run<br />
layout using single or multiple strips in series powered only at one end of the <strong>LED</strong> strip allows the<br />
longest lengths of tape to be used. Other configurations are possible. A center-feed layout powers<br />
two equal legs of tape lighting from a central position, a loop-back layout has both ends of<br />
the <strong>LED</strong> tape powered simultaneously, and an array layout powers several unequal<br />
lengths of tape from one end. For more information on these alternative layouts,<br />
consult the power supply chart on our website.<br />
* Based on full-power brightness, the lengths<br />
shown are totals for <strong>LED</strong> tape lighting; do not<br />
include connecting wires in your calculations.<br />
Maximum RGB <strong>LED</strong> <strong>Tape</strong> Lengths*<br />
<strong>LED</strong><br />
Density<br />
(<strong>LED</strong>s/m)<br />
15 Watt<br />
00U41.82<br />
$21.50<br />
30 Watt<br />
00U41.83<br />
$26.50<br />
60 Watt<br />
00U41.84<br />
$42.50<br />
Straight run: powered at one end 30 6.6И (2m) 16.4И (5m) 32.8И (10m)<br />
40Й<br />
Colored <strong>LED</strong>s add a unique<br />
ambiance to your room.<br />
16Й<br />
Color controller<br />
Back view<br />
31Й<br />
31Й<br />
16Й<br />
43/4Й<br />
Wire lead connector<br />
Side view<br />
<strong>LED</strong> strip<br />
mounted on<br />
corner bracket<br />
(double-sided adhesive<br />
tape used to secure<br />
bracket to TV back).<br />
15 watt<br />
30 watt<br />
Power<br />
Supply<br />
60 7И (2.1m) 16.4И (5m)<br />
60 watt<br />
Need More Connectors or Wire?<br />
<strong>LED</strong> Connectors and Wire<br />
If you are joining multiple strips of lighting, you may need more connectors and wire<br />
than are included in the kits. White and RGB connectors are not the same; white <strong>LED</strong><br />
tape light uses two-conductor wires and connectors, while RGB <strong>LED</strong> tape light<br />
requires special four-conductor wires and connectors.<br />
<strong>LED</strong> Connectors and Wire White RGB<br />
Splice Connector 00U41.32 $ .70 00U41.62 $ .80<br />
Wire Lead Connector 00U41.31 $ 1.20 00U41.61 $ 1.90<br />
Wire Support Clip 00U41.33 $ .20 00U41.33 $ .20<br />
22 ga. Flat Ribbon Wire, 8m (26.2И) 00U41.36 $ 6.80 00U41.66 $ 12.90<br />
22 ga. In-Wall Wire, 8m (26.2И) 00U41.37 $ 8.60 00U41.67 $ 15.50<br />
18 ga. Standard Wire, 8m (26.2И) 00U41.35 $ 8.60<br />
Connection Examples<br />
WHITE<br />
Splice connector: used to join two light strips<br />
for a continuous run of lighting.<br />
RGB<br />
Splice<br />
Wire lead<br />
Wire lead connector: for running<br />
tape light around a corner, or to connect<br />
adjacent strips. You can cut the<br />
wire in half, producing two wire leads<br />
with connectors that can be joined<br />
with a length of wire, useful when<br />
extending power wires or connecting<br />
tape light in another area.<br />
To make longer “jumper” cables. Cut a wire lead<br />
connector in half to create two wire leads that can be<br />
joined to longer wires to extend power wires or connect<br />
separate strips of lighting.<br />
Wire lead to wire<br />
Wire support clip<br />
In-wall<br />
In-wall<br />
Ribbon<br />
Wire support clips: a simple wire<br />
holder with an adhesive backing.<br />
Ribbon<br />
22 gauge wire: a 26.2И (8m) roll in two formats: flat ribbon wire,<br />
In-wall<br />
for most applications, and in-wall rated (with a PVC jacket), for<br />
use when the wire will be hidden inside a wall.<br />
18 gauge ribbon wire: (for use with white <strong>LED</strong>’s only): supplied as a 26.2И (8m) roll. A good<br />
choice to reduce voltage drop when using longer runs of wire. You can generally run about twice<br />
the length of 18 gauge over 22 gauge wire. For example, if your 60 <strong>LED</strong> per metre tape is 12'<br />
long, the maximum wire length from the ribbon tape to the power supply is 10' using 22 gauge<br />
and 20' using 18 gauge.