Configuring Site-to-Site VPN between Safe@office with DAIP and ...

More documents

Recommendations

Info

f. Add both an internal and external Safe@ interface. Do the following for each interface: 1) Click Add…. Configuring FW-1 NG FP2/FP3 The Interface Properties dialog box appears with the General tab displayed. 2) In the Name field, type the interface’s name. 3) If you are configuring the internal interface, type the interface’s IP address, and subnet mask in the appropriate fields. Note: The network address may differ depending on the Safe@ appliance’s network range. In this example, 192.168.10.0/24 is used. 4) If you are configuring the external interface, select Dynamic IP. Configuring Site-to-Site VPNs between Safe@Office with DAIP and VPN-1 NG 7
Configuring FW-1 NG FP2/FP3 The IP Address and Net Mask fields appear dimmed. 5) Click on the Topology tab. The Topology tab is displayed. 8 Configuring Site-to-Site VPNs between Safe@Office with DAIP and VPN-1 NG
Page 1 and 2: Configuring Site-to-Site VPN betwee
Page 3 and 4: Configuring FW-1 NG FP2/FP3 About T
Page 5 and 6: Configuring FW-1 NG FP2/FP3 Note: T
Page 7: Configuring FW-1 NG FP2/FP3 If you
Page 11 and 12: Configuring FW-1 NG FP2/FP3 9) Clic
Page 13 and 14: Configuring FW-1 NG FP2/FP3 i. Clic
Page 15 and 16: Configuring FW-1 NG FP2/FP3 b. Do o
Page 17 and 18: Configuring FW-1 NG FP2/FP3 e. Clic
Page 19 and 20: Configuring FW-1 NG FP2/FP3 i. Clic
Page 21 and 22: Configuring FW-1 NG FP2/FP3 …and
Page 23 and 24: Exporting the Safe@ Gateway Object
Page 25: Configuring the Safe@Office Applian

Configuring Site-to-Site VPN between Safe@office with DAIP and ...

Create successful ePaper yourself

Delete template?

Save as template?