28.11.2014 Views

Flying Cloud - Airstream

Flying Cloud - Airstream

Flying Cloud - Airstream

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Electrical<br />

CONVERTER COOLING SYSTEM<br />

G<br />

The 7300 electronic fan cooling system is the key to long life and trouble-free<br />

operation. The fan is never on more than required to cool electronic components<br />

in the converter. You may never hear the fan operate.<br />

Converter<br />

The converter transforms 120-volt alternating current (AC) into 12-volt direct<br />

current (DC). This provides power to charge the trailer battery and to operate<br />

the 12 volt interior lighting, fans, and appliances.<br />

The converter is energized only when the trailer is hooked up to 120-volt city<br />

power.<br />

Converter Testing<br />

D. The voltage must be within 13.8 and 14.0 volts. (The meter of the<br />

tester should be calibrated periodically.)<br />

E. If converter is not within these voltages, have it serviced by a<br />

qualified technician or replace it.<br />

One of these wires is not spliced onto a wire of the same color. It is the back up<br />

wire that is yellow in the cable and black in the harness.<br />

INVERTER (option)<br />

The Inverter powers one additional labeled 110 volt receptacle and when<br />

combined with the factory installed television in the Audio/Video Upgrade<br />

package this option also includes an additional invertor powered outlet for the<br />

television.<br />

A. Confirm 120 volt power is going into converter.<br />

B. Disconnect the 12+ wire from the master switch.<br />

C. Using a voltmeter check voltage output between heavy positive<br />

and negative wires coming out of converter.<br />

The inverter converts 12 volt electricity from your batteries into 110 volt power.<br />

The switch for the inverter is located under the monitor panel. Overloading the<br />

inverter will cause a automatic shut off to activate. Removing the load will allow<br />

the inverter to reset.<br />

G - 6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!