MS-1000 Hardware Manual
MS-1000 Hardware Manual
MS-1000 Hardware Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Appendix IV - Electro-Cap Users<br />
Using the Electro-Cap with Mindset <strong>MS</strong>-<strong>1000</strong><br />
NCS accepts no liability for hazards which might arise from improper use of your electrode<br />
system. Exercise extreme care in handling all connections to human subjects, including<br />
electrodes and grounding straps. Follow all guidelines provided by the manufacturer of your<br />
electrode system. If you are unsure about any connection to a human subject, stop and seek<br />
proper guidance. Do not attempt to defeat any safety measures which may be integral to your<br />
electrode system. Do not construe the instructions in this manual to suggest practices that may<br />
allow any part of the electrode assembly to come into contact with a source of dangerous<br />
electrical potential while a human subject is connected.<br />
Additional Information for Electro-Cap Procedures<br />
Complete all steps as specified in the Electro-Cap manual for to attaching the body harness, attaching<br />
the cap, and preparing the electrode sites. Refer to the following illustrations as an aid in connecting the<br />
Electro-Cap to the Mindset.<br />
Your Electro-Cap Electrode Board Adapter wires may need to be separated two inches further<br />
in order for all pins to reach the <strong>MS</strong>-<strong>1000</strong> input jacks without tension. Separate the wires<br />
carefully and evenly. The wires should never, under any circumstances, be separated back to<br />
the blue connector.<br />
22