EU Declaration of Conformity - Solar-Fabrik AG

EU Declaration of Conformity
The company
KOSTAL Solar Electric GmbH
Hanferstraße 6
79108 Freiburg i. Br., Deutschland
hereby declares that the inverters
Type HW ≥ SW ≥
PIKO 3.0 DCS 5x0313 04.00
PIKO 3.6 DCS 5x0313 04.00
PIKO 4.2 DCS 5x0313 04.00
PIKO 5.5 DCS 5x0313 04.00
PIKO 7.0 DCS 5x0000 04.00
PIKO 7.0 AD 5x0000 04.00
PIKO 8.3 DCS 5x0316 04.00
PIKO 8.3 AD 5x0000 04.00
PIKO 10.1 DCS 5x0316 04.00
PIKO 10.1 AD, basic 5x0000 04.00
to which this declaration refers, conform to the following guidelines and standards.
EMC Directive 2004/108/EEC
DIN EN 61000-3-2:2006 + A1:2009 + A2:2009 (Harmonic currents)
DIN EN 61000-3-3:2008 (Flicker)
DIN EN 61000-6-2:2005 + AC:2005 (Interference resistance for industrial environments)
DIN EN 61000-6-3:2007 + A1:2011 (Interference emission for domestic environments)
2006/95/EEC Low Voltage Directive
DIN EN 50178:1998 (Electronic devices in high voltage systems)
This declaration applies to all identical copies of this product. This declaration loses its validity if
the device is modified or incorrectly connected.
KOSTAL Solar Electric GmbH – 2012-04-25
Werner Palm
(Managing Director)
Dr. Armin von Preetzmann
(Development Manager)
This declaration certifies the compliance with the mentioned regulations but does not ensure the properties. The safety
instructions in the product documentation provided must be observed!

Bureau Veritas
Consumer Products Services
Germany GmbH
Businesspark A96
86842 Türkheim
Deutschland
+ 49 (0) 40 740 41-0
cps-tuerkheim@de.bureauveritas.com
Certificate of compliance
Applicant:
Product:
Model:
KOSTAL Solar Electric GmbH
Hanferstrasse 6
79108 Freiburg
Germany
Disconnection device for PV generators
Elektronischer DC-Freischalter DCS
Use in accordance with regulations:
Disconnection between a solar inverter and a photovoltaic generator
Applied rules and standards :
In dependence on
IEC 60947-3:1999 + Corrigendum:1999 + A1:2001 + Corrigendum 1:2001 + A2:2005
DIN EN 60947-3; VDE 0660-107:2006-03
“Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and
fuse-combination units”
and
IEC 60364-7-712:2002-05
DIN VDE 0100-712:2006-06
“Electrical Installations of Buildings - Part 7-712: Requirements for Special Installations or Locations -
Solar Photovoltaic (PV) Power Supply Systems”
The safety concept of an aforementioned representative product corresponds at the time of issue of this
certificate of valid safety specifications for the specified use in accordance with regulations.
Report number: 09TH0063-IEC60947
Certificate nummer: U12-0407
Date of issue: 2012-05-08 Valid until: 2015-05-07
Achim Hänchen

Total Harmonic Distortion for PIKO inverters
Order PIKO 3.0 PIKO 3.6 PIKO 4.2 PIKO 5.5 PIKO 7.0 PIKO 8.3 PIKO 10.1
n I [A] I [A] I [A] I [A] I [A] I [A] I [A]
1 12,4484 14,5607 5,599 7,246 10,130 10,793 12,696
2 0,0599 0,0669 0,067 0,054 0,177 0,068 0,079
3 0,6559 0,7498 0,111 0,139 0,204 0,142 0,185
4 0,0191 0,0162 0,011 0,003 0,035 0,021 0,024
5 0,2064 0,2089 0,027 0,083 0,054 0,058 0,122
6 0,0028 0,0018 0,002 0,004 0,020 0,02 0,029
7 0,0823 0,07 0,087 0,087 0,125 0,089 0,116
8 0,0024 0,0015 0,009 0,007 0,004 0,023 0,032
9 0,0314 0,0297 0,073 0,044 0,057 0,155 0,143
10 0,0024 0,0012 0 0,004 0,006 0,012 0,034
11 0,0141 0,0236 0,075 0,032 0,108 0,076 0,082
12 0,0024 0,0072 0,001 0,006 0,015 0,054 0,075
13 0,0363 0,0425 0,056 0,037 0,049 0,047 0,107
14 0,0038 0,0023 0,007 0,002 0,025 0,033 0,027
15 0,056 0,0555 0,045 0,057 0,022 0,103 0,206
16 0,0021 0,0054 0,008 0,007 0,015 0,014 0,004
17 0,0669 0,0664 0,071 0,057 0,076 0,067 0,151
18 0,0028 0,0057 0,007 0,002 0,009 0,034 0,01
19 0,0895 0,0892 0,03 0,025 0,085 0,066 0,101
20 0,0024 0,0048 0,003 0,006 0,004 0,023 0,013
21 0,0617 0,0596 0,06 0,023 0,037 0,066 0,055
22 0,0034 0,0065 0,002 0,005 0,005 0,016 0,015
23 0,0447 0,0461 0,092 0,054 0,084 0,123 0,143
24 0,0028 0,0034 0,008 0,005 0,006 0,017 0,008
25 0,0259 0,0295 0,049 0,043 0,072 0,083 0,061
26 0,0034 0,0023 0,002 0,003 0,004 0,005 0,005
27 0,0249 0,0283 0,02 0,025 0,031 0,024 0,036
28 0,0024 0,0049 0,001 0,002 0,007 0,007 0,003
29 0,0376 0,0496 0,048 0,045 0,040 0,069 0,089
30 0,0041 0,0088 0,001 0,002 0,002 0,004 0,006
31 0,0388 0,0646 0,025 0,021 0,031 0,04 0,044
32 0,0044 0,006 0,003 0,003 0,005 0,01 0,013
33 0,0349 0,0534 0,006 0,006 0,008 0,011 0,012
34 0,0031 0,0066 0,006 0,002 0,004 0,01 0,008
35 0,0153 0,036 0,047 0,013 0,015 0,048 0,049
36 0,0024 0,0052 0,006 0,003 0,002 0,008 0,004
37 0,0029 0,0166 0,024 0,01 0,012 0,025 0,032
38 0,0021 0,0044 0,002 0,001 0,002 0,013 0,022
39 0,0041 0,004 0,011 0,007 0,002 0,005 0,016
40 0,0025 0,0024 0,002 0,004 0,002 0,007 0,014
For all the above inverters, the Total Harmonic Distortion for current THD (I) is less than 3%.
KOSTAL Solar Electric GmbH, 2012-04-25
Werner Palm
(Managing Director)
Dr. Armin von Preetzmann
(Development Manager)
This declaration certifies the compliance with the mentioned regulations but does not ensure the properties. The safety
instructions in the product documentation provided must be observed!

Bureau Veritas Consumer
Products Services
Germany GmbH
Businesspark A96
86842 Türkheim
Germany
+ 49 (0) 40 740 41 - 0
cps-tuerkheim@de.bureauveritas.com
Certificate of compliance
Applicant:
Product:
KOSTAL Solar Electric GmbH
Hanferstrasse 6
79108 Freiburg
Germany
Automatic disconnection device between a generator
and the public low-voltage grid
Model: PIKO 3.0, PIKO 3.6, PIKO 4.2, PIKO 5.5
Use in accordance with regulations:
Automatic disconnection device with three-phase PIKO 4.2, PIKO 5.5 (single-phase PIKO 3.0, PIKO
3.6) mains surveillance in accordance with Engineering Recommendation G59/2 for photovoltaic
systems with a three-phase PIKO 4.2, PIKO 5.5 (single-phase PIKO 3.0, PIKO 3.6) parallel coupling
via an inverter in the public mains supply. The automatic disconnection device is an integral part of the
aforementioned inverter. This serves as a replacement for the disconnection device with isolating
function that can access the distribution network provider at any time.
Applied rules and standards :
DIN V VDE V 0126-1-1:2006-02 (Redundancy) and Engineering Recommendation G59/2: The PIKO
3.0, PIKO 3.6, PIKO 4.2, PIKO 5.5 are rated

Bureau Veritas Consumer
Products Services
Germany GmbH
Businesspark A96
86842 Türkheim
Germany
+ 49 (0) 40 740 41 - 0
cps-tuerkheim@de.bureauveritas.com
Certificate of compliance
Applicant:
Product:
KOSTAL Solar Electric GmbH
Hanferstrasse 6
79108 Freiburg
Germany
Automatic disconnection device between a generator
and the public low-voltage grid
Model: PIKO 3.0, PIKO 3.6, PIKO 4.2, PIKO 5.5
Use in accordance with regulations:
Automatic disconnection device with three-phase (single-phase PIKO 3.0, PIKO 3.6) mains
surveillance in accordance with Engineering Recommendation G83/1 for photovoltaic systems with a
three-phase (single-phase PIKO 3.0, PIKO 3.6) parallel coupling via an inverter in the public mains
supply. The automatic disconnection device is an integral part of the aforementioned inverter. This
serves as a replacement for the disconnection device with isolating function that can access the
distribution network provider at any time.
Applied rules and standards :
DIN V VDE V 0126-1-1:2006-02 (Redundancy) and Engineering Recommendation G83/1.
The safety concept of an aforementioned representative product corresponds at the time of issue of
this certificate of valid safety specifications for the specified use in accordance with regulations.
Report number: 09TH0062-G83
05KFS170-G83
Certificate nummer: U11-941
Date of issue: 2011-10-14 Valid until: 2014-10-13
Achim Hänchen