Video Entry System - Fagel
Video Entry System - Fagel
Video Entry System - Fagel
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Two-house system with intercom<br />
For a two<br />
-famil<br />
mily ysyst<br />
ystem<br />
with h2in<br />
intercom groups, it is sufficient to add a VSE/301 selector for each<br />
apartment<br />
wit<br />
h Thangram system.<br />
One-fa<br />
mily video entry system kits are available with Lithos video entry panel (LVKIT - see e pag<br />
age 139)<br />
or Thangram video entry panel (EVKIT - see page 135-136) combined different video recei<br />
eivers type.<br />
Purchase separately the additional receiver, the additional buttons for the entry<br />
panel<br />
and the VSE/301<br />
inter<br />
com receiver selector.<br />
<strong>System</strong> with Lithos entry panel and Lynea Basic rece iver<br />
VAS/101<br />
YVCL301<br />
YVCL301<br />
XDV/304<br />
LVC/01<br />
2 x DPS<br />
YVCL301<br />
YVCL301<br />
VCM/1D<br />
2 WIRES<br />
N.B.: BPT’s Lynea Basic receivers, if appropriately configured, can be used to set up two<br />
intercom<br />
callgl groups (as<br />
shown in the figure) without<br />
the use of VSE/301<br />
selectors. In addition, these receivers offer the Master/Slave function: in the case of a simultaneous<br />
calls, the audio/video<br />
lin<br />
k to the receiver will be activated<br />
on<br />
the Master receiver only. However, the call can also be answered from the Slave receiver, r, to which the video call will l be t<br />
ransferred when the handset is lifted.<br />
X1 <strong>System</strong> VIDEO ENTRY SYSTEM<br />
<strong>System</strong> with Thangram entry panel<br />
VSE/301<br />
VSE/301<br />
OPHERA<br />
XDV/304<br />
VA/01<br />
OPHERA<br />
OPHERA<br />
VAS/101<br />
VAS/101<br />
OPHERA<br />
DVC/01 ME<br />
2 x DPS<br />
2 x DTS<br />
DSI<br />
DCI ME<br />
DPF NF<br />
VCM/1D<br />
VCM/2D<br />
2 WIRES<br />
The intercom function is a standard feature of the Mithos and Ophera receivers, and<br />
can be used<br />
with the<br />
Lynea<br />
range<br />
(except<br />
the Basic YVL/301 version) by adding the pushbutton accessories.<br />
NOTE: The receivers can be connected in "daisy-chain" or "star" confi guration<br />
using<br />
XDV/304<br />
modules for<br />
internal<br />
distribution.<br />
77