PCI Express 3.0 Characterization, Compliance ... - Teledyne LeCroy

More documents

Recommendations

Info

SEG Compliance Testing for PCI-SIG Certification Tests 2.1/2.2/2.5/2.6 - Tx Signal Integrity Tests 2.8/2.9 – Rx Signal Integrity Tests 2.3/2.4/2.7 – Tx Link Equalization Response Test Tests 2.10/2.11 - Rx Link Equalization Test Tests 2.12 – PLL Loop Bandwidth Test Teledyne LeCroy 2013 24
Preset test (Section 2.3) Repeat? • Capture PCIe Gen3 compliance pattern with 11 presets and feed the results into sigtest. • Except this time, we don’t use the toggle switch on the CLB/CBB, Preset changes will be initiated through protocol request from the test equipment Teledyne LeCroy 2013 25
Page 1 and 2: PCI Express 3.0 Characterization, C
Page 3 and 4: PCI Express 3.0 Compared to PCIE 2&
Page 5 and 6: How does PCI Express 3.0 Work TxEQ
Page 7 and 8: PCI-SIG and LeCroy 1. PCI Express C
Page 9 and 10: PCI-SIG Logo Test Gold Suites Teled
Page 11 and 12: SEG Compliance Testing for PCI-SIG
Page 13 and 14: Transmitter Testing for PCI Express
Page 15 and 16: Preset test Capture PCIe Gen3 compl
Page 17 and 18: SEG Compliance Testing for PCI-SIG
Page 19 and 20: Step 1: Preset Calibration - 11 pre
Page 21 and 22: Step 3: DM calibration - DM will be
Page 23: Rx Jitter Tolerance Signal with All
Page 27 and 28: Test: Section 2.4 (or 2.7) • Add-
Page 29 and 30: Rx Link Equalization Training Signa
Page 31 and 32: Example: Section 2.10 (or 2.11) •
Page 33 and 34: PLL Loopback Bandwidth Testing Freq
Page 35 and 36: Live Demo - Link EQ Compliance Trig
Page 37 and 38: PeRT 3 Phoenix LeCroy PeRT 3 is cap

PCI Express 3.0 Characterization, Compliance ... - Teledyne LeCroy

Create successful ePaper yourself

Delete template?

Save as template?