PCI Express 3.0 Characterization, Compliance ... - Teledyne LeCroy
PCI Express 3.0 Characterization, Compliance ... - Teledyne LeCroy
PCI Express 3.0 Characterization, Compliance ... - Teledyne LeCroy
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Example: Section 2.10 (or 2.11)<br />
• Add-In (or System) Card Receiver<br />
Link EQ Test for 8.0 GT/s<br />
• Procedure<br />
• Enable jitter for target eye<br />
• Send EQ TS2 P7 at 2.5G<br />
• Change speed to 8G<br />
• Do equalization phases 0-3<br />
• Record final requested cursor<br />
from DUT in phase 2 (or 3)<br />
• Continue into Loopback<br />
• Perform RX Test<br />
• Send Modified <strong>Compliance</strong><br />
Pattern<br />
• Pass if ≤ 1 error in 2:05<br />
• 0 errors in 6:15 for 95%<br />
confidence of E-12 BER<br />
Generate<br />
Calibrated<br />
Eye<br />
Perform full<br />
equalization<br />
and then enter<br />
loopback<br />
Measure BER<br />
Copyright © 2012, <strong>PCI</strong>-SIG, <strong>Teledyne</strong> All Rights <strong>LeCroy</strong> Reserved 2013 31 31