LIBERA Series - Scame Parre S.p.A.

LIBERA Series
Connectors and consumer units
for electric vehicles

LIBERA Series
> CONNECTORS FOR ELECTRIC VEHICLES > REFERENCE STANDARDS
CEI 69-6
Standardization sheet of plug and socket-outlet for the
connection of eletric road vehicles to the supply network.
IEC 62196-1
Plugs, socket-outlets, vehicle couplers and vehicle
inlets - Conductive charging of electric vehicles.
Part 1: charging of electric vehicles up to 250A a.c. and 400A d.c.
23H / 204 / NP IEC62196-2
Plugs, socket-outlets and vehicle couplers - Conductive
charging of electric vehicles.
Part 2: dimensional interchangeability requirements for pin
and contact-tube vehicle couplers.
> VERSIONS
Plugs
IEC 61851-1
Electric vehicle conductive charging system.
Part 1: general requirements.
Connectors
> QUALITY MARKS
Flush mounting sockets
Appliance inlets
Adaptors for domestic applications
> TECHNICAL CHARACTERISTICS
Rated current:
16A - 32A
Rated voltage: 230V~
Frequency:
50Hz
Insulating voltage: 230V~
Protection degree:
IP40 (IP20 for adaptors)
Operating temperature
according to the
reference standard: -25°C+40°C
Max. operating temperature: 60°C
Glow Wire test:
650°C/850°C
Material:
Engineering plastic
IK degree at 20°C:
IK07
Cable inlets:
Cable sleeve IP44
Cable gland IP67
2

BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS
Saline
solution
Resistant
Concentrated
Limited
Resistance
Acids
Resistant
Limited
Resistance
Bases
Diluted Concentrated Diluted Hexane Benzol Acetone Alcohol
Resistant
For specific substances please contact our technical service.
Not
Resistant
Not
Resistant
Solvents
Not
Resistant
Limited
Resistance
Mineral
oil
Resistant
UV
rays
Resistant
LIBERA Series
> WIRING AND INSTALLATION
Wiring capacity of the terminals (mm 2 )
Rated
voltage
Rated
current (A)
Plugs, connectors
and appliance inlets
Min
Max
Socket outlets
Min
Max
over 50V
16A 1
32A
2,5
2,5
6
1,5 4
2,5 10
> APPLICATION EXAMPLES
3

LIBERA Series
> THE “SAFE-IN” SAFETY DEVICE
The “SAFE-IN” device works like the protection installed on
household sockets, i.e., by means of an appropriate shutter, it
closes the input of the socket contact tubes and prevents
accidental and voluntary contact of live parts of the socket with
slim objects, such as screwdrivers or wires. This protection offers
an additional safety guarantee, in addition to that already
provided by the spring-loaded cover assembled on the mobile
sockets.
> PILOT
The indispensable safety during the conductive recharge of the
eletric road vehicles is assured by the use of plug and socket
outlet provided of back up terminal (pilot) in addition to the active
and protection poles.
The back up terminal allow to make a control pilot circuit with the
following functions:
- verification that the vehicle is properly connected;
- continuous protective earth conductor integrity checking;
- energization of the system;
- de-energization of the system.
Connector tube protective shutter for greater safety against direct
contacts. (The SAFE-IN safety device).
4

EXAMPLE OF ELECTRICAL ROAD VEHICLES CHARGING
Charging station
Vehicles
LIBERA Series
230V
Connection
Charger
820
ohm
Electronic control board
Back-up terminal (pilot)
The indicated solution, that is checking the presence of a 820 ohm resistence, is the adopted solution in Italy and also in the order European country.
> SNAP-ON DEVICE
OPENING
The product is supplied in the open position;
opening is obtained by a simple rotation of the
handgrip or of the fruit.
CLOSURE
The spring located on the side of the handgrip
locks the same on the contact-holding fruit.
The assembly is locked through a simple
rotation, engaging the spring into its seat.
INSPECTION
Opening is possible by means of a tool (screw
driver) to be used following the ideographs
marked on the handgrip.
5

Connector for electric vehicles
> CONNECTOR FOR ELECTRIC VEHICLES - IP44
Description
Adaptors for
domestic use
Type
Italian plug (P17) 16A-230V~
2P+E - IP20
French-German plug 16A-230V~
2P+E - IP20
10/100 200.01623
10/100 200.01624
Plug
16A-230V~ 2P+E+pilot - IP44 10/100 200.01633 200.01633A
32A-230V~ 2P+E+pilot - IP44 10/100 200.03233
Description
Type
Flange
Connectors
Flush mounting
socket
Angled socket
16A-230V~ 2P+E+pilot - IP44 10/100 200.01643
32A-230V~ 2P+E+pilot - IP44 10/100 200.03243
16A-230V~ 2P+E+pilot - IP44 70x87 mm 10/100 200.01663
32A-230V~ 2P+E+pilot - IP44 70x87 mm 10/100 200.03263
16A-230V~ 2P+E+pilot - IP44 70x87 mm 10/100 200.01693
32A-230V~ 2P+E+pilot - IP44 70x87 mm 10/100 200.03293
> SUPPLY PANEL FOR ELECTRIC VEHICLES (STANDARD)
Technical characteristics
- Version with earthing conductor control card for selfpropelling
electric vehicles (as adopted in Italy – 3 charge
mode – and as specified in the standard CEI 69-6 regarding
recharging in areas open to third parties).
- N. 2 Libera series 2P+E+ pilot according to CEI 69-6.
- Socket protection with D curve bipolar MT switch and
“A - 30 mA” type differential on each socket.
- Emergency cut-off of the recharging system (and the supply
of the sockets).
- Panel supply voltage: 230 Vac.
- Rated current: 32A
6
Description
With 1 Libera Series 16A flush socket and emergency push-button 1 671.2016-733
With 2 Libera Series 16A flush sockets and emergency push-button 1 671.3026-480

CONNECTORS FOR ELECTRIC VEHICLES WITH RFID SYSTEM (UB1/UB2 PERSONAL)
Description
Type
Mobile plug + TAG 16A-230V~ 2P+E+pilot - IP44 10/100 200.01633T
Mobile plug + TAG + Plug Card (*) 16A-230V~ 2P+E+pilot - IP44 10/100 200.01633TC
(*) Plug Card which contains the same identification code as the plug
LIBERA Series
> SUPPLY PANEL FOR ELECTRIC VEHICLES WITH RFID SYSTEM
Description
Version with one socket and emergency button with RFID system
for recognizing the authorized plug
Version with two sockets and emergency button with RFID system
for recognizing the authorized plug
The panel is supplied with a Master Card board for programming
1 200.UB1
1 200.UB2
> CONTROL SYSTEM / MENAGEMENT
Description
User Card: activates the functions of the personal UB1/UB2 panel
allowing energy drawing with TAG-less Libera plugs also
Programmer: User Card programming device (for entering enabling
parameters and code)
1 200.UBC
1 200.UBPRO
> ACCESORIES
Description
Tubular pole in galvanized steel 1 654.0650
Fastening plate 1 654.0651
7

LIBERA Series
> UB1 / UB2 PERSONAL WITH MASTER CARD
The socket is dead until an
authorized (user) plug is
inserted
The socket is protected
against non-authorized plugs
An innovative system for management and control of an
electrical capable of enabling the supply service for authorized
users only.
The PERSONAL UB1 and UB2 modules use RFID technology for
unique recognition of the user requesting connection; this control
allows the socket to be kept dead until recognition of an
authorized plug. Unique user identification for assignment of
responsibility, a system which is certainly useful when supplying
electricity in environments which are open to the public.
Self-learning of the plugs to
be authorized with
Master Card
Automatic identification and
control of the user during
connection
> APPLICATION EXAMPLES
8

DIMENSIONS
ENCLOSURES
LIBERA Series
ENCLOSURES
(Dimensions in mm)
9

LIBERA Series
> DIMENSIONS
ADAPTOR FOR DOMESTIC APPLICATIONS - 16A
ADAPTOR FOR DOMESTIC APPLICATIONS - 16A
90° PLUG
PLUG - 32A
PLUG - 16A
Ø 44
Ø 7
31
30
143
114
Ø 44
Ø 53
Ø 53
31
30
10
(Dimensions in mm)

CONNECTOR - 16A
Ø 7
46
31
CONNECTOR - 32A
46
Ø 44
31
119
148
Ø 53
Ø 44
Ø 53
LIBERA Series
FLUSH MOUNTING SOCKET - 16A-32A
56
87
18˚
70
73
34
43
70
65
APPLIANCE INLET - 16A-32A
(Dimensions in mm)
11

ZP00509-GB-5
Scame’s technological partners
in this project:
www.in-presa.com
info@tagitalia.com
ScameOnLine
www.scame.com
export@scame.com
GENERALE SISTEMI SRL
VIA FRA I CAMPI, 13/C
59012 GALCIANA - PRATO - ITALY
TEL. +39 0574 816434
FAX +39 0574 815476
SCAME PARRE S.p.A.
VIA COSTA ERTA, 15
24020 PARRE (BG) ITALY
TEL. +39 035 705000
FAX +39 035 703122