PHOSPHAX sc - Can-Am Instruments Ltd.

More documents

Recommendations

Info

Operation 5.2 Sensor Setup Menu (continued) CONFIGURE (continued) TUBE HEATING REAG. WARNING DEFAULT SETUP MAINTENANCE INFORMATION MEASURING DATA ENABLED: Probe tube heating switches on at the start of the selected month when using the Filter Probe sc. OFF: Probe tube heating switches off at the end of the selected month when using the Filter Probe sc. Determines the warning output if the reagent levels are low WARNING: Reagent level to trigger a warning Resets the user-editable options to their factory-defaults. LOCATION 1: Indication of measuring location 1 LOCATION 2: Indication of measuring location 2 on two-channel version TYPE: Indication of instrument type SENSOR NAME: displays sensor name SERIAL NUMBER: displays the serial number RANGE: displays the measuring range OPTION: displays instrument option (Filter probe sc/1-channel/2-channel) SOFTW. PHOS.: detailed information concerning the PHOSPHAX sc software SOFTW. PROBE: detailed information on Filter Probe sc software LOCATION 1: 1-channel mode enabled GAIN CORR: Indicates the correction factor set for correcting the measured values at measuring location 2. DATE: Indicates the date of the last change to the correction factor. LOCATION 2: 2-channel version enabled GAIN CORR: Indicates the correction factor set for correcting the measured values at measuring location 2. DATE: Indicates the date of the last change to the correction factor DEXT LAST VALUE: Indication of the delta extinction (EXT MESS-EXT REF) of the last measurement. EXT MESS: Extinction during the last measurement EXT REF: Extinction during the last zeroing AMPLIFY MEAS.: Measuring amplifier gain factor AMPLIFY REF: Reference amplifier gain factor MEAS. ZERO: Measuring amplifier measured value during zeroing OFFSET MEAS: Measuring amplifier offset MEAS. : Measuring amplifier measured value during measurement REF ZERO: Reference amplifier measured value during zeroing OFFSET REF: Reference amplifier offset REF: Reference amplifier measured value during measurement LIST OF VALUES: List of the last 10 measured values 32
Operation 5.2 Sensor Setup Menu (continued) MAINTENANCE (continued) MAINT. COUNTER (Counter for reagent and consumables) TEST/MAINT OPERATING HOURS: Indicates the instrument operating hours. REAGENT: Displays the current level of the reagent. CLEANING SOLU.: Displays the current level of the cleaning solution. AIR FILTER PADS: Days left until the air filter needs to be changed/cleaned PISTON PUMP: Days left until the pump piston and cylinder need to be replaced (PHOSPHAX sc piston pump) REAGENT PUMP: Number of pump strokes performed by the reagent metering pump STATUS MODULES: Filter Probe sc must be registered to indicate the state of the modules CLEANING MODULES: Filter Probe sc must be registered to show the last filter module cleaning NEW MODULES: Filter Probe sc must be registered to show the last filter module replacement PUMP MEMBRANE: Filter Probe sc must be registered to show the date of the last pump membrane replacement (Filter Probe sc sample pump) COMPRESSOR: Filter Probe sc must be registered to show the days left until the replacement of the air compressor SIGNALS PROCESS: Indication of what the instrument is doing ODD TIME: Indication of the time left for the currently ongoing process CUVETTE TEMP.: Current measuring cell temperature ENCLOSURE TEMP.: Current temperature in the instrument COOLING: Current speed of the enclosure fan in % HEATING: Current enclosure heating power PRESSURE ANALY.: Current pressure in the metering system in mbar HUMIDITY ANALY.: Indication of whether there is liquid in the collecting tray PRESSURE PROBE: Filter Probe sc must be registered to show the pressure of the filters prior to the start of sample suction PRESSURE PROBE: Filter Probe sc must be registered to show the minimum pressure of the filters during sample suction HEATING OF PRO.: Filter Probe sc must be registered to show the switching state of the sample tubing heating HUMIDITY PROBE: Filter Probe sc must be registered to show whether there is moisture in the probe enclosure OUTPUT MODE: Value that is output in the service state: Hold=last measured value; Transfer=value to be entered. REAGENT: Reset the maintenance counter after reagent change CLEANING SOLU.: Resets the maintenance counter after changing the cleaning solution AIR FILTER PADS: Menu-based process for changing the air filter pads, resetting the maintenance counter PISTON PUMP: Days left until the next pump piston and cylinder replacement (PHOSPHAX sc piston pump), reset after replacement of the pump REAGENT PUMP: Number of pump strokes performed by the reagent metering pump, reset after replacement of the pump PREPUMPING: All liquids are pre-pumped in succession PREPUMP ALL: The reagent is pre-pumped. PREPUMP REAG.: The cleaning solution is pre-pumped. PREPUMP CLEAN: PREPUMP PROBE: The Filter Probe sc and modules are bled and pre-pumped. CLEANING MODULES: Filter Probe sc must be registered to show the menu-based process for cleaning the filters and automatically resetting the maintenance counter. NEW MODULES: Filter Probe sc must be registered to show the last filter replacement 33
Page 1 and 2: Catalog Number DOC026.53.00026 PHOS
Page 3 and 4: Table of Contents Section 1 Specifi
Page 5 and 6: Section 1 Specifications Specificat
Page 7 and 8: Section 2 General Information 2.1 S
Page 9 and 10: Section 3 Installation 3.1 Basic In
Page 11 and 12: Installation Figure 2 Instrument Di
Page 13 and 14: Installation Figure 4 Wall Mounting
Page 15 and 16: 3.4.2 Removing the Shipping Transpo
Page 17 and 18: Installation 3.4.3 Installing the C
Page 19 and 20: 3.4.5 Connecting the Sample Supplie
Page 21 and 22: 3.5.1 Electrostatic Discharge (ESD)
Page 23 and 24: 3.5.5 Connecting the Optional Heate
Page 25 and 26: Installation 3.6 Installing Reagent
Page 27 and 28: Installation 1 Data Network Connect
Page 29 and 30: Section 4 System Startup Prior to i
Page 31: Section 5 Operation 5.1 Sensor Diag
Page 35 and 36: Section 6 Maintenance DANGER Only q
Page 37 and 38: 6.4 Modifying from Single Channel t
Page 39 and 40: Section 7 Troubleshooting 7.1 Troub
Page 41 and 42: Troubleshooting 7.2.2 Error Message
Page 43 and 44: Section 8 Replacement Parts and Acc
Page 45 and 46: Replacement Parts and Accessories 8
Page 47 and 48: Replacement Parts and Accessories F
Page 49 and 50: Replacement Parts and Accessories F
Page 51 and 52: Section 9 How to Order U.S.A. Custo
Page 53 and 54: Section 11 Limited Warranty Hach Co
Page 55 and 56: Section 12 Certification Hach Compa
Page 57 and 58: Appendix A Plumbing and Connection
Page 59 and 60: Plumbing and Connection Options A.2
Page 61 and 62: Plumbing and Connection Options Fig
Page 83 and 84:
Plumbing and Connection Options Fig
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
show all

PHOSPHAX sc - Can-Am Instruments Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?