Regency IG35 owners & instal manual.pdf
Regency IG35 owners & instal manual.pdf
Regency IG35 owners & instal manual.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION<br />
25) Secure all loose wires in the wire clip to the right side of the valve.<br />
See diagram 23.<br />
Screen Door Installation:<br />
28) Re-<strong>instal</strong>l the glass door.<br />
29) Install the screen by placing the hooks (2 on each side) into the slots<br />
on the inside of the faceplate. Once in place, push down on the screen<br />
to secure. See diagram 26.<br />
Diagram 23<br />
Louver Installation:<br />
26) Secure the hinge bracket and hinge to the outside of the fi rebox fl ange<br />
on the left and right side as shown using 2 screws on each side. See<br />
diagram 24.<br />
Diagram 26<br />
Hinge Bracket<br />
Hinge<br />
30) Close the bottom louver.<br />
Diagram 24<br />
31) Plug in the power source.<br />
27) Align the bottom louver hinge tab screw holes with hinge screw holes<br />
and secure using 3 screws on each side. See diagram 25.<br />
NOTE:<br />
The fan should run at least on low speed to prevent the unit<br />
from overheating which will cause automatic shutdown via the<br />
thermodisc safety switch.<br />
Bottom Louver<br />
Diagram 25<br />
20 <strong>Regency</strong> <strong>IG35</strong> Gas Inbuilt Fireplace