hinge cutting template - Morse Industries

Paladia
Wall Mount Offset Back Plate Hinge
Part #C50-0002
Paladia
Wall Mount Offset Back Plate Hinge
Part #C50-0002
Specifications:
- Solid brass hinge for use on 3/8” (10 mm) and 1/2” (12 mm)
tempered safety glass
- Cutout required (see template on back for installation)
- Maximum door capacity with two hinges is 100 lbs; 3 hinges is
130 lbs
- Open/Close cycle of at least 50,000
Gaskets:
For 3/8” (10 mm) glass, use two gaskets per side
For 1/2” (12 mm) glass, use one gasket per side
We recommend only using tempered safety glass.
Do not use power tools to install these hinges.
Specifications:
- Solid brass hinge for use on 3/8” (10 mm) and 1/2” (12 mm)
tempered safety glass
- Cutout required (see template on back for installation)
- Maximum door capacity with two hinges is 100 lbs; 3 hinges is
130 lbs
- Open/Close cycle of at least 50,000
Gaskets:
For 3/8” (10 mm) glass, use two gaskets per side
For 1/2” (12 mm) glass, use one gasket per side
We recommend only using tempered safety glass.
Do not use power tools to install these hinges.
25811 74th Avenue South Kent, WA 98032
Toll Free Phone (800) 325-7513
25811 74th Avenue South Kent, WA 98032
Toll Free Phone (800) 325-7513

Paladia
Wall Mount Offset Back Plate Hinge
Part #C50-0002
Paladia
Wall Mount Offset Back Plate Hinge
Part #C50-0002
(63
mm)
”
(44 mm)
”
(38 mm)
” ”
(57
mm)
Project
measurements
from the edge of
the glass.
Edge of Glass Edge of Glass
”
(16 mm)
Diameter
25811 74th Avenue South
Kent, WA 98032
Toll Free Phone (800) 325-7513
Toll Free Fax (800) 411-8226
(63
mm)
”
(44 mm)
”
(38 mm)
” ”
(57
mm)
Project
measurements
from the edge of
the glass.
Edge of Glass Edge of Glass
”
(16 mm)
Diameter
25811 74th Avenue South
Kent, WA 98032
Toll Free Phone (800) 325-7513
Toll Free Fax (800) 411-8226