Comfort Terminal - Knight Farm Machinery
Comfort Terminal - Knight Farm Machinery
Comfort Terminal - Knight Farm Machinery
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4<br />
Mounting and installation<br />
SIM card<br />
4.2.2<br />
<strong>Terminal</strong> ports<br />
Rear of the terminal. Version with a GSM modem and camera connections<br />
GSM antenna port<br />
Only for terminals with a GSM modem<br />
installed.<br />
Not currently in use<br />
Port for analog camera<br />
Only for terminals with a GSM modem<br />
installed.<br />
Item no. 30322527<br />
Port for analog camera<br />
Only for terminals with a GSM modem<br />
installed.<br />
USB port<br />
USB 1.1<br />
Covering cap for USB port<br />
Prevents dust from entering the USB socket.<br />
SIM card slot<br />
Port B<br />
CAN bus port<br />
For connection of a working position sensor<br />
for<br />
TRACK-Leader II.<br />
Port A<br />
CAN bus port<br />
To connect the ISOBUS basic equipment.<br />
Port C<br />
Serial port RS232<br />
4.3<br />
SIM card<br />
The terminal must be equipped with a SIM card so that you can use the <strong>Farm</strong>Pilot portal. If you do<br />
not intend to use the <strong>Farm</strong>Pilot portal, you will not need any SIM card.<br />
Which SIM card<br />
You must purchase the SIM card from your mobile phone provider.<br />
Select a mobile phone provider that can guarantee good mobile phone reception on your fields. A<br />
good connection is required in order for your work with the <strong>Farm</strong>Pilot portal to run smoothly.<br />
The SIM card must meet the following requirements:<br />
▪ It must be GPRS-capable.<br />
▪ It must be PIN-free. Inform your mobile phone provider about this requirement before purchasing<br />
the SIM card.<br />
▪ The contract must enable data transfer.<br />
14 Copyright © Müller-Elektronik GmbH & Co.KG
Change language