Comfort Terminal - Knight Farm Machinery

7
Configuring the terminal in the Service application
Activating the "Diagnostics" function
2. Press the following buttons in the order displayed and keep them pressed for a short while:
(on older terminals you need to press the buttons in reversed order)
⇨ While the screenshot is being captured, the icon of a photo camera will be displayed in the
centre of the display:
⇨ When the camera icon disappears, the screenshot has been created.
⇨ You will find the screenshot you captured in the location you specified as the "Storage location".
The USB flash drive saves the screenshots in the folder "ScreenCopy".
7.13
Procedure
Activating the "Diagnostics" function
To activate the "Diagnostics" function, you must first activate its driver.
1. Switch to the "Driver settings" screen:
| Service | Driver settings
⇨ The following screen will appear:
2. Click on "Diagnostics".
3. Click on the "DiagnosticsServices" driver.
⇨ Next to the driver the icon
will appear.
4. - Restart terminal.
⇨ The following function icon will appear on the start screen of the "Service" application:
⇨ You have activated the "Diagnostics" function.
7.13.1
Jobcomputer diagnostics
The screen "Jobcomputer diagnosis" contains a variety of information that is primarily important to
Customer Services. Customer Services can use this screen to determine which versions of the
hardware and software are installed on your terminal. This will speed up the diagnostic process if
errors arise.
42 Copyright © Müller-Elektronik GmbH & Co.KG