pdf, 9,0 MB - Selve

SELVE-SEL-Plus-drives
(SELVE-Electronic-Luxus-drives)
SEL
SE – the innovative drives
with electronic shut-off
The roller shutter installation is protected in an optimal way using a SEL-Plus-drive. During
first installation you can set, if the roller shutter will run smooth aganist the upper limit or will
be shut-off at the fixed upper point. The end limits are programmed by pushing a button –
first installation even without any installation cable.
Advantages of the SEL-Plus-drives
obstacle detection in downwards direction
and reverse function
easy setting of the drive using the four-core
connection cable without having to
open the shutter box
installation in an usual manner
overload cut-out if torque is
exceeded when raising the shutter (e.g. frozen on roller shutter)
several SELVE electronic drives can be connected in
parallel without additional switching units
sophisticated adapter system
enables the motor to be adapted
to allconventional shafts
up- and downwards direction
is detected automatically
Selectable functions during setting of the end limits:
no upper limit:
position shut-off
with upper limit:
soft approach to the shutter box with automatic release function
it is not necessary to adjust the roller shutter after stretching
(automatic adjustment)
end limits are programmed automatically by a push botton
General information
Drives and accessories
for roller shutters and awnings
Controls for roller shutters,
awnings and blinds
Examples of application
Components
for roller shutters
27