pdf, 9,0 MB - Selve

www.selve.de
SE-R - the innovative drives
with electronic shut-off
Drive technology
General information about SEM-R drives
SELVE electronic drive series consists of different versions.
The version SEM-R is available as type 1, 2 and 3.
The description, for example, of SEM 2/17-R indicates mode of power shut-off, type and torque rating:
SEM = SELVE Electronic M(awnings)
2 = medium sized types (shaft 50 and larger)
17 = 17 Nm
R = Radio version
SEM drives will be delivered without adapters.
Those and cables have to be ordered separately.
Easy programming of SELVE electronic radio drives is possible either using the remote control
or setting switch Ref. 29 01 09.
Technical information of SEM-R drives
Type
SEM
1/4-R
SEM
1/7-R
SEM
2/7-R
SEM
2/10-R
Article no. 38 19 13 38 19 33 38 38 20 38 38 40
Torque at rated load Nm 4 7 7 10
Rotation speed rpm 20 20 17 17
Power rating W 105 105 95 105
Current consumption A 0.45 0.45 0.41 0.45
Voltage V 230 230 230 230
Frequency Hz 50 50 50 50
Time of operation min 4 4 4 4
Protective system: IP 44 IP 44 IP 44 IP 44
Test mark CE CE CE CE
Limit switch range U - - - -
Outer diameter mm 35 35 45 45
Cable length m 3 3 0 0
Length L 1 mm 497 497 497 497
Length L 2 mm 472 472 481 481
Length of square fixing pivot mm 12 12 12 12
48