ap32dt120 - EMCIA
ap32dt120 - EMCIA
ap32dt120 - EMCIA
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
AP32 DT120<br />
POWER AMPLIFIER<br />
20W CW 10kHz- 1000MHz<br />
A class Solid State<br />
High VSWR operation<br />
Application : Radiated and Conducted EMC<br />
Designed and manufactured in Europe, the AP32DT120 power amplifier operates in a<br />
symmetric mode with high linearity capability.<br />
Its very wide bandwidth allows a full Bulk Current Injection test with no band switching.<br />
Solid state power modules are combined with high performance proprietary devices.<br />
PRANA back ground into high power and broadband EMC products in last 10 years<br />
brings products to high reliability.<br />
A high linear power is available at low frequencies and allows a high field output level<br />
with typical broadband antennas.<br />
PRANA EMC amplifiers are designed to withstand excessive VSWR of typical EMC<br />
field generation or current injection load mismatch.<br />
The AP32DT120 amplifier is compatible with any automatic test environment thanks to<br />
additional measurement and communication features.<br />
The up to date and modern concept of the AP32DT120 amplifier warrants the user of a<br />
permanent internal signal levels monitoring and allows local or remote full diagnostic<br />
capability.<br />
Z.I. La Marquisie, Avenue du 4 Juillet 1776, BP.25 19101 BRIVE CEDEX-FRANCE - Tel : 33(0)5 55 86 49 40 - Fax : 33(0)5 55 86 49 30<br />
Electrical and Mechanical Specifications subject to change without notice.<br />
<strong>ap32dt120</strong>.doc page 1/3
AP32 DT120<br />
POWER AMPLIFIER<br />
20W CW 10kHz- 1000MHz<br />
Output characteristics<br />
Nominal power<br />
Single Instantaneous range<br />
Power at 3 dB compression<br />
Power at 1 dB compression max.<br />
Gain<br />
Linear power gain flatness<br />
Nominal output load<br />
Reflected Power on load mismatch<br />
Harmonic distortion at 1dB compression<br />
Spurious<br />
Noise figure for F>1MHz<br />
Input characteristics<br />
Input level for nominal output power<br />
Input impedance<br />
Input VSWR<br />
Maximum input level<br />
External interface<br />
20 W<br />
10kHz – 1000MHz<br />
25 W min. up to 750MHz, 12W min. up to 1000MHz<br />
20 W min. up to 750MHz, 10W min. up to 1000MHz<br />
42 dB typ., 39 dB min.<br />
± 1.5 dB typ, ± 3 dB max.<br />
50 Ohms<br />
30W reverse power without power protection<br />
H2
AP32 DT120<br />
POWER AMPLIFIER<br />
20W CW 10kHz- 1000MHz<br />
Power graph<br />
Z.I. La Marquisie, Avenue du 4 Juillet 1776, BP.25 19101 BRIVE CEDEX-FRANCE - Tel : 33(0)5 55 86 49 40 - Fax : 33(0)5 55 86 49 30<br />
Electrical and Mechanical Specifications subject to change without notice.<br />
<strong>ap32dt120</strong>.doc page 3/3
Change language