Ropes and Knots

More documents

Recommendations

Info

Skill Drill 9-11 Tying a Figure Eight with a Follow-Through (2 of 2) 9 3. Pull the knot tight. 4.Tie a safety knot in the working end.
9 Skill Drill 9-12 Tying a Bowline (1 of 3) 1. Make the desired sized loop and bring the working end back to the standing part. 2. Form another small loop in the standing part of the rope, with the section close to the working end on top.
Page 1 and 2: 9 Ropes and Knots
Page 3 and 4: 9 Skill Drill 9-2 Cleaning Fire Dep
Page 5 and 6: 9 Skill Drill 9-3 Inspecting Fire D
Page 7 and 8: Skill Drill 9-4 Placing a Life Safe
Page 9 and 10: 9 Skill Drill 9-5 Tying a Safety Kn
Page 11 and 12: 9 Skill Drill 9-6 Tying a Half Hitc
Page 13 and 14: 9 Skill Drill 9-7 Tying a Clove Hit
Page 19 and 20: 9 Skill Drill 9-9 Tying a Figure Ei
Page 21 and 22: 9 Skill Drill 9-10 Tying a Figure E
Page 23: Skill Drill 9-11 Tying a Figure Eig
Page 27 and 28: 9 Skill Drill 9-12 Tying a Bowline
Page 29 and 30: 9 Skill Drill 9-13 Tying a Sheet or
Page 31 and 32: 9 Skill Drill 9-14 Hoisting an Axe
Page 33 and 34: 9 Skill Drill 9-14 Hoisting an Axe
Page 35 and 36: 9 Skill Drill 9-15 Hoisting a Pike
Page 37 and 38: 9 Skill Drill 9-15 Hoisting a Pike
Page 39 and 40: 9 Skill Drill 9-16 Hoisting a Ladde
Page 41 and 42: 9 Skill Drill 9-16 Hoisting a Ladde
Page 43 and 44: 9 Skill Drill 9-17 Hoisting a Charg
Page 45 and 46: 9 Skill Drill 9-18 Hoisting an Unch
Page 47 and 48: 9 Skill Drill 9-19 Hoisting an Exha
Page 49: 9 Skill Drill 9-19 Hoisting an Exha

Ropes and Knots

Create successful ePaper yourself

Delete template?

Save as template?