Ropes and Knots

More documents

Recommendations

Info

9 Skill Drill 9-12 Tying a Bowline (2 of 3) 3. Pass the working end over the loop, around the standing part, and back through the same opening. 4. Tighten the knot by holding the working end and pulling the standard part of the rope backward.
9 Skill Drill 9-12 Tying a Bowline (3 of 3) 5. Tie a safety knot in the working end of the rope.
Page 1 and 2: 9 Ropes and Knots
Page 3 and 4: 9 Skill Drill 9-2 Cleaning Fire Dep
Page 5 and 6: 9 Skill Drill 9-3 Inspecting Fire D
Page 7 and 8: Skill Drill 9-4 Placing a Life Safe
Page 9 and 10: 9 Skill Drill 9-5 Tying a Safety Kn
Page 11 and 12: 9 Skill Drill 9-6 Tying a Half Hitc
Page 13 and 14: 9 Skill Drill 9-7 Tying a Clove Hit
Page 19 and 20: 9 Skill Drill 9-9 Tying a Figure Ei
Page 21 and 22: 9 Skill Drill 9-10 Tying a Figure E
Page 23 and 24: Skill Drill 9-11 Tying a Figure Eig
Page 25: 9 Skill Drill 9-12 Tying a Bowline
Page 29 and 30: 9 Skill Drill 9-13 Tying a Sheet or
Page 31 and 32: 9 Skill Drill 9-14 Hoisting an Axe
Page 33 and 34: 9 Skill Drill 9-14 Hoisting an Axe
Page 35 and 36: 9 Skill Drill 9-15 Hoisting a Pike
Page 37 and 38: 9 Skill Drill 9-15 Hoisting a Pike
Page 39 and 40: 9 Skill Drill 9-16 Hoisting a Ladde
Page 41 and 42: 9 Skill Drill 9-16 Hoisting a Ladde
Page 43 and 44: 9 Skill Drill 9-17 Hoisting a Charg
Page 45 and 46: 9 Skill Drill 9-18 Hoisting an Unch
Page 47 and 48: 9 Skill Drill 9-19 Hoisting an Exha
Page 49: 9 Skill Drill 9-19 Hoisting an Exha

Ropes and Knots

Create successful ePaper yourself

Delete template?

Save as template?