SUPERLITE HELMET REMOVAL12.pdf - Association of Diving ...

More documents

Recommendations

Info

OPEN (Crack)( AIR SUPPLY VALVE 28
The dive team member holding the diver's head (maintaining c-spine alignment) should place his/her right hand between the yoke/neck ring assembly and the diver's right shoulder to support the assembly. The left hand is placed on the left side <strong>of</strong> the helmet to maintain its position. 29
Page 1 and 2: ASSOCIATION OF DIVING CONTRACTORS I
Page 3 and 4: EMERGENCY REMOVAL OF DIVING SYSTEMS
Page 5 and 6: Standard emergency medical protocol
Page 7 and 8: These procedures also furnish a rem
Page 9 and 10: Manufacturers of specific helmets s
Page 11 and 12: CAUTION These procedures only addre
Page 13 and 14: The primary consideration should be
Page 15 and 16: 1. A minimum of two properly traine
Page 17 and 18: 4. The dive team member who initial
Page 19 and 20: Have heavy bandage scissors or para
Page 21 and 22: Address "A B C s" of first aid. AIR
Page 23 and 24: DIVER IN “RECOVERY” POSITION No
Page 25 and 26: CUT HARNESS CLEAR 25
Page 27: "Crack" Steady Flow (Side Block) va
Page 31 and 32: The second dive team member opens t
Page 33 and 34: CLEAR REAR HINGE TAB 33
Page 35 and 36: The second dive team member then ro
Page 37 and 38: The helmet is then placed in front
Page 39 and 40: The second dive team member (using
Page 41 and 42: The second dive team member then li
Page 43 and 44: Reposition the diver on his/her bac
Page 45 and 46: Using shears, cut the suit neck dam
Page 47 and 48: MODEL 27A/B, 17C & 17K HELMET REMOV
Page 49 and 50: Have heavy bandage scissors or para
Page 51 and 52: Address "A B C s" of first aid. AIR
Page 53 and 54: DIVER IN “RECOVERY” POSITION No
Page 55 and 56: Release the umbilical from the dive
Page 57 and 58: OPEN (Crack) AIR SUPPLY VALVE 57
Page 59 and 60: MAINTAINING HEAD/C-SPINE POSITION 5
Page 61 and 62: RELEASE (2) PULL-PINS 61
Page 63 and 64: OVERPRESSURIZE HELMET TO RELEASE NE
Page 65 and 66: The dive team member maintaining th
Page 67 and 68: ROLL HELMET FORWARD then BACK 67
Page 69 and 70: The helmet is then placed in front
Page 71 and 72: Release chin strap at the neck ring
Page 73 and 74: CUTTING NECK DAM 73
Page 75 and 76: Move the bailout cylinder, weight b
Page 77 and 78: POSITION DIVER FOR IMMOBILIZATION &
Page 79 and 80:
CUT SUIT AS NECESSARY 79
show all

SUPERLITE HELMET REMOVAL12.pdf - Association of Diving ...

Create successful ePaper yourself

Delete template?

Save as template?