SUPERLITE HELMET REMOVAL12.pdf - Association of Diving ...

More documents

Recommendations

Info

The second dive team member then lifts the neck ring assembly over the diver's head while the dive team member holding the c-spine position guides the ring and maintains the head/neck position. Lift the ring assembly clear <strong>of</strong> the diver's head. 74
Move the bailout cylinder, weight belt and all associated equipment clear <strong>of</strong> the diver. 75
Page 1 and 2:
ASSOCIATION OF DIVING CONTRACTORS I
Page 3 and 4:
EMERGENCY REMOVAL OF DIVING SYSTEMS
Page 5 and 6:
Standard emergency medical protocol
Page 7 and 8:
These procedures also furnish a rem
Page 9 and 10:
Manufacturers of specific helmets s
Page 11 and 12:
CAUTION These procedures only addre
Page 13 and 14:
The primary consideration should be
Page 15 and 16:
1. A minimum of two properly traine
Page 17 and 18:
4. The dive team member who initial
Page 19 and 20:
Have heavy bandage scissors or para
Page 21 and 22:
Address "A B C s" of first aid. AIR
Page 23 and 24: DIVER IN “RECOVERY” POSITION No
Page 25 and 26: CUT HARNESS CLEAR 25
Page 27 and 28: "Crack" Steady Flow (Side Block) va
Page 29 and 30: The dive team member holding the di
Page 31 and 32: The second dive team member opens t
Page 33 and 34: CLEAR REAR HINGE TAB 33
Page 35 and 36: The second dive team member then ro
Page 37 and 38: The helmet is then placed in front
Page 39 and 40: The second dive team member (using
Page 41 and 42: The second dive team member then li
Page 43 and 44: Reposition the diver on his/her bac
Page 45 and 46: Using shears, cut the suit neck dam
Page 47 and 48: MODEL 27A/B, 17C & 17K HELMET REMOV
Page 49 and 50: Have heavy bandage scissors or para
Page 51 and 52: Address "A B C s" of first aid. AIR
Page 53 and 54: DIVER IN “RECOVERY” POSITION No
Page 55 and 56: Release the umbilical from the dive
Page 57 and 58: OPEN (Crack) AIR SUPPLY VALVE 57
Page 59 and 60: MAINTAINING HEAD/C-SPINE POSITION 5
Page 61 and 62: RELEASE (2) PULL-PINS 61
Page 63 and 64: OVERPRESSURIZE HELMET TO RELEASE NE
Page 65 and 66: The dive team member maintaining th
Page 67 and 68: ROLL HELMET FORWARD then BACK 67
Page 69 and 70: The helmet is then placed in front
Page 71 and 72: Release chin strap at the neck ring
Page 73: CUTTING NECK DAM 73
Page 77 and 78: POSITION DIVER FOR IMMOBILIZATION &
Page 79 and 80: CUT SUIT AS NECESSARY 79
show all

SUPERLITE HELMET REMOVAL12.pdf - Association of Diving ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?