2012 super duty f-series incomplete vehicle manual - Ford Fleet
2012 super duty f-series incomplete vehicle manual - Ford Fleet
2012 super duty f-series incomplete vehicle manual - Ford Fleet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
NOTES:<br />
VIEW P<br />
FIGURE E – SUPER DUTY F-SERIES UREA FILLER PIPE INSTALLATION<br />
F-SERIES (February, 2011)<br />
VIEW P<br />
FRONT OF<br />
VEHICLE<br />
VIEW P<br />
TORQUE ALL WORM GEAR DRIVEN HOSE CLAMPS<br />
TO 4.8 8 NEWTON METERS [43 7 IN. LB.]<br />
[ ] DIMENSIONS ARE INCHES<br />
* NOT SUPPLIED BY FORD MOTOR COMPANY<br />
SUB<br />
75<br />
27<br />
3/16 INCH<br />
BLIND RIVET *<br />
(12 REQ’ D)<br />
616.0<br />
[2.42]<br />
SECTION U<br />
FRONT OF<br />
VEHICLE<br />
Remove and discard the <strong>Ford</strong> installed urea fill system<br />
components (provided for shipping purposes only) except<br />
save and reuse the metal neck and cap assembly.<br />
Use the new hoses, pipes, scuff guards, tie wraps, and<br />
clamps provided in the dunnage kit.<br />
The completed urea fill system must provide a 2 degree<br />
minimum, continuous, downward slope to the urea tank.<br />
Additional support may be required to prevent hose<br />
sagging which could cause spray or spitback during<br />
normal filling operations.<br />
Do not extend the urea fill system outboard of the second<br />
unit body.<br />
STATEMENTS OF CONFORMITY
Change language