LIGHTING - Harley Davidson Shop

E
E
LIGHTING 633
Turn Signals
Rear Directional Bar 13"
E. CHROME REAR DIRECTIONAL MOUNTING BAR
Rear directional mounting bar is cast from a very durable zincaluminum
alloy, has been drilled and tapped for 5/16 inch
mounting fasteners and is chrome-plated for a beautiful finish.
(Lamp assemblies and mounting fasteners not included.)
68510-74C
Fits ’86-later FLST and FLSTC, ’93-’96 FLSTN and ’74-’84
FLH models. (Does not fit FLSTS.)
Narrow Bar 10"
E. CHROME REAR DIRECTIONAL MOUNTING
BAR
E. NARROW CHROME DIRECTIONAL BAR
F
Shown with:
NARROW CHROME DIRECTIONAL BAR
Enhance the rear profile of your Softail ® or Touring model
with this Narrow Chrome Directional Bar that enhances the
visual proportions of the bike. At 10 inches wide, this die-cast,
chrome-plated bar is 3 inches shorter than the stock bar and
features the same great quality.
68611-98
Fits ’86-later FLST and FLSTC, ’93-’96 FLSTN models and
’91-’08 Touring models (except ’04-’08 FLHRS models). Also
fits ’09-later FLHRC, FLHTC, FLHTCU and FLHTK models.
(Does not fit with Flat Lens Turn Signal Module
P/N 91699-99A.)
F. LIGHTED CHROME DIRECTIONAL BAR*
Chrome-plated bar provides a custom look with complete integration.
LED light pods provide auxiliary lighting for both brake
and tail light. NOTE: Must only be used as auxiliary lighting.
68143-98A
Fits ’86-later FLSTC, ’93-’96 FLSTN; ’91-’08 FLHT, FLHS and
FLHR (except FLHRS and FLHX), ’09-later FLHRC, FLHTC,
FLHTCU and FLHTK models. Directional Lamps not included.
G. BULLET REAR TURN SIGNAL BAR KIT
Give your bike a new sporting attitude with the Bullet Turn
Signal Kit. The chrome-plated bar and bullet turn signal housings
provide a custom look, and the narrow profile places the
signal lamps between the saddlebag and the rear fender for a
sleek appearance.
Fits ’99-’08 Touring models (except FLHX), ’09-later FLHRC,
FLHTC, FLHTCU, FLHTK models and ’99-’08 FLST and FLSTC
Softail ® models. Will not fit FLSTC models with ’00-later
Original Equipment Heritage Classic Saddlebags.
68617-04 International.
H. CHROME LICENSE PLATE/LIGHT KIT*
Tubular license plate housing includes dual filament (running
lights/brake) and supplementary rear lights. Includes all
mounting hardware. These lights should be installed as
supplemental only.
68230-97B
Fits ’97-’08 FLHTC and FLHTCU models. Also fits ’97-’08
FLHT, Road King ® (except FLHRS).
F. LIGHTED CHROME DIRECTIONAL BAR
G
H
*WARNING: Disconnecting your DOT requirement
brake lamp could reduce your visibility to others and
result in death or serious injury.
G. BULLET REAR TURN SIGNAL BAR KIT
H. CHROME LICENSE PLATE/LIGHT KIT
NOTE: It is possible to overload your motorcycle’s charging
system by adding too many electrical accessories. If your
combined electrical accessories operating at any one time
consume more electrical current than your vehicle’s charging
system can produce, the electrical consumption can
discharge the battery and cause vehicle electrical system
damage. Ask your dealer for advice about the amount of
current consumed by additional electrical accessories.